1. KREG
#ad
Kreg SML-C1-500 1-Inch #8 Coarse Washer-Head Pocket Hole Screws, 500 Count, 500, SML-C1
#adKREG #ad - Coarse threads for softwoods, MDF, such as pine; and for plywood, particleboard. Maxi-loc washer head for standard Kreg pocket holes. Flat-bottom head and smooth shank draw the pocket-hole joint together tightly.More information #ad
Case-hardened steel won’t bend, snap, or break. Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting.Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 5 Inches |
Length | 3 Inches |
Weight | 2.27 Pounds |
Width | 4.25 Inches |
Part Number | SML-C1 - 500 |
Model | SML-C1 - 500 |
Warranty | limited warranty, please call vendor for warranty issues |
More information #ad
2. KREG
#ad
2 1/2", Washer Head, 8 Coarse, 250 count, Kreg SML-C250B-250 Blue-Kote Weather Resistant Pocket Hole Screws
#adKREG #ad - Needle sharp point minimizes walking. Large maxi-loc head stops when it hits the bottom of the hole. Sharp edge of self-tapping tip drills a cleaner pilot hole. Great for outdoor applications. Performs 400% better in corrosion resistance than our old zinc-plated screws.More information #ad
Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 2.3 Pounds |
Width | 0 Inches |
Part Number | SML-C250B-250 |
Model | SML-C250B-250 |
Warranty | As Labeled |
More information #ad
3. KREG
#ad
Kreg Zinc SML-C125-1200 1-1/4" Washer Head Number 8 Coated Pocket Hole Screws 1200 Count
#adKREG #ad - Maxi-loc washer head for standard Kreg pocket holes. Coarse threads for softwoods, MDF, such as pine; and for plywood, particleboard. Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting.More information #ad
Flat-bottom head and smooth shank draw the pocket-hole joint together tightly. Case-hardened steel won’t bend, snap, or break.Brand | KREG #ad |
Manufacturer | Kreg Enterprises, Inc. #ad |
Height | 3.6 Inches |
Length | 9 Inches |
Weight | 5.1 Pounds |
Width | 6.1 Inches |
Part Number | SML-C125-1200 |
Model | SML-C125-1200 |
More information #ad
4. KREG
#ad
Kreg SML-C250-50 2-1/2-Inch #8 Coarse Washer-Head Pocket Screws, 50 Count
#adKREG #ad - Maxi-loc washer head. 2-1/2-inch screw for joining 1-1/2-inch stock. Great for softer materials like pine, plywood, particle board, MDF and melamine. Larger threads provide maximum holding power. Washer head seats flushly in the bottom of the pocket, eliminating pull through.More information #ad
Great for softer materials like pine, plywood, particle board, MDF and melamine.2-1/2-inch screw for joining 1-1/2-inch stock. Washer head seats flushly in the bottom of the pocket, eliminating pull through. Larger threads provide maximum holding power.Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 5 Inches |
Length | 2 Inches |
Weight | 0.48 Pounds |
Width | 3 Inches |
Part Number | SML-C250-50 |
Model | SML-C250 - 50 |
Warranty | limited warranty, please call vendor for warranty issues |
More information #ad
5. KREG
#ad
500, 1-1/4" COARSE Washer Head SELF Tapping Screw
#adKREG #ad - 1-1/4" screw length for joining 3/4" stock. Battery not included. Large diameter of steel shank creates durable screw. Self-tapping auger tips do away with predrilling. Hole screws prevent overdriving in pocket bottoms.More information #ad
Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 5 Inches |
Length | 3 Inches |
Weight | 2.7 Pounds |
Width | 4.25 Inches |
Part Number | 1510 |
Model | SML-C125-500 |
Warranty | limited warranty, please call vendor for warranty issues |
More information #ad
6. KREG
#ad
2", 8 Coarse, Washer Head, 250 count, KREG SML-C2B-250 Blue-Kote Weather Resistant Pocket Hole Screws
#adKREG #ad - Great for outdoor applications. Large maxi-loc head stops when it hits the bottom of the hole. Needle sharp point minimizes walking. Sharp edge of self-tapping tip drills a cleaner pilot hole. Performs 400% better in corrosion resistance than our old zinc-plated screws.More information #ad
Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 0 Inches |
Length | 0 Inches |
Weight | 1.5 Pounds |
Width | 0 Inches |
Part Number | SML-C2B-250 |
Model | SML-C2B-250 |
More information #ad
7. KREG
#ad
SML-C2-50 Kreg SML-C2 2-Inch Washer Head #8 Coarse Pocket Screws, 50 Count Zinc, KREG
#adKREG #ad - Case-hardened steel won’t bend, snap, or break. Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting. Coarse threads for softwoods, MDF, such as pine; and for plywood, particleboard.More information #ad
Maxi-loc washer head for standard Kreg pocket holes. Flat-bottom head and smooth shank draw the pocket-hole joint together tightly.Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 5 Inches |
Length | 2 Inches |
Weight | 0.42 Pounds |
Width | 3 Inches |
Part Number | SML-C2-50 |
Model | SML-C2 - 50 |
Warranty | limited warranty, please call vendor for warranty issues |
More information #ad
8. KREG
#ad
500, Kreg SML-C150-500 Pocket Hole Screws 1-1/2-Inch #8 Coarse Washer-Head 500ct, SML-C150
#adKREG #ad - Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting. Maxi-loc washer head for standard Kreg pocket holes.More information #ad
Case-hardened steel won’t bend, snap, or break. Coarse threads for softwoods, MDF, such as pine; and for plywood, particleboard. Flat-bottom head and smooth shank draw the pocket-hole joint together tightly.Brand | KREG #ad |
Manufacturer | Kreg #ad |
Height | 5 Inches |
Length | 3 Inches |
Weight | 3.03 Pounds |
Width | 4.25 Inches |
Part Number | SML-C150-500 |
Model | SML-C150 - 500 |
Warranty | limited warranty, please call vendor for warranty issues |
More information #ad
9. KREG
#ad
Kreg Zinc SML-C125-250 1-1/4" Coarse Thread Number 8 Coated Pocket Hole Screws 250 Count
#adKREG #ad - Maxi-loc washer head for standard Kreg pocket holes. Coarse threads for softwoods, MDF, such as pine; and for plywood, particleboard. Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting.More information #ad
Flat-bottom head and smooth shank draw the pocket-hole joint together tightly. Case-hardened steel won’t bend, snap, or break.Brand | KREG #ad |
Manufacturer | Kreg Enterprises, Inc. #ad |
Height | 1.9 Inches |
Length | 6.4 Inches |
Weight | 1.3 Pounds |
Width | 4.1 Inches |
Part Number | SML-C125-250 |
Model | SML-C125-250 |
Warranty | limited warranty, please call vendor for warranty issues |
More information #ad