Top 9 Ar15 Vise Block – Bench Clamps

As an Amazon Associate I earn from qualifying purchases.



Available in 4" or 6" 2 Sets in 1, Magnetic Reversible Pads, Nylon, Multipurpose, Vise Jaws, Use on any Metal Vise, Clamp Flat or Round Products

JCL PRODUCTS #ad - Discount when you buy 2, 100% money back warranty if for any reason you are not satisfied. The design makes them unique for gunsmith, hobby, workbench, toolmaker non-marring – AUSTRALIAN MADE. They can be used on both faces of each jaw to Grip round tube or threaded part or any flat material. One side flat, woodwork, v-pads, one side multi-groove, Prismatic, protector for Barrels, mechanics. Nylon 4" jaws will protect and hold any delicate product Flat or round on any Vise or Drill press.
ManufacturerJCL PRODUCTS #ad
Height1 Inches
Length4 Inches
Weight0.19 Pounds
Width1 Inches
Modelsoft jaws 4 black

2. Yost Tools


Yost LV-4 Home Vise 4-1/2" 1 Pack

Yost Tools #ad - 5” x 5. Screw diameter: 05cm, handle diameter: 07 pounds 4. 85" d pipes and tubes 1. 8cm x 2. Anvil: 1. 4” 1cm x handle length 6” 15.

Holds 05” x 4. 1cm. Home work shop Vise, assembly, woodworking, general maintenance.6" d to 1. 240-degree swivel base allows rotating the vise for versatility. 5cm x 4. 2cm. 7cm x 1. 7cm. 30, 000 psi cast iron construction, blue power coat finish. 3cm and 106” 1. Installation hardware not included: 4 bolts 3/8” x table thickness. 9kgs. Product dimensions and shipping weight: 9. 4cm x 5. Jaw width: 4-1/2" 11. 4cm x jaw opening: 3" 7. 6cm x throat depth: 2. 4" 6. 1cm. Swivel base features 4 mounting tabs.
BrandYost Tools #ad
ManufacturerYost #ad
Height7.5 Inches
Length11 Inches
Weight9 Pounds
Width11 Inches
Part NumberLV-4



Non Marring Soft Jaws, Multi-Purpose Design for Gunsmithing, Woodworking, ATLIN Vise Jaws 6", Nylon, Plumbing, Jewelry Making

ATLIN #ad - Universal compatibility - atlin vice jaws are compatible with any 6" milling vise, machine vise, drill press vise, bench vise. Grooved design – the 6 inch vise inserts feature a multi-purpose design which is ideal for gunsmithing, tubing, woodworking, pipe, jewelry making, threaded items, AN fittings.

Sizing & specs - vise jaws measure 6" in length, groove sizes: 3/8" @ 60° angle | vertical grooves: 1/4", 1/8", 1/16" 5/8" | horizontal groove: 1/4" – See second photo for further details. Non-marring - the vise jaws are made from a tough, but soft nylon. Easy install - the soft jaws attach to your vise with 3 neodymium magnets; no screws or bolts needed. Atlin 6in vise jaw pads will never mar or damage any of your project materials.
BrandATLIN #ad
ManufacturerATLIN #ad
Height1.15 Inches
Length6 Inches
Weight7 ounces
Width0.6 Inches
Part NumberGHT1003A



TRISENSE Vise Jaw Covers,Aluminum Multipurpose 4”Soft Vice Inserts-Use On Any Drill Press Vise As Accessories,Gold Vise Jaws Pads(2 Pack In 1)

TRISENSE #ad - Wide application the side of each vise jaw pad is designed with non-slip diamond pattern on the side, which can hold various types of workpieces and non marring. Upgraded magnets multifunctional of aluminum soft jaws have 3 magnets are arranged horizontally on the inside, strong enough, not easily fall off and easy to use.

High compatibility the set include 2 pcs gold of standard 4 inch soft vise jaws. Well made and suitable for various types of vice, drill press vise, such as vise block, bench clamps. Such as round wood, pipes, plastic, threaded objects, metal, etc. Exquisite packaging, craftsmen, high quality vise jaw packaging uses delicately sealed PVC bags to ensure complete product delivery to your hands.

Special gasket design thses vice jaw pads with rubber inserts, which sliding design easy to disassemble and clean up. Unique diamond rhombus design on the rubber pads surface provides strong grip, non marring. Our vice jaws are durable with their professional quality, tool manufacturers, locksmiths all love to choose us.
ManufacturerTRISENSE #ad
Height1.1 Inches
Length4 Inches
Weight8 ounces
Width1 Inches



Magnetic Vice Jaw Covers Protectors, WORKPRO 2-Pair Vise Jaw Pads, 5-1/2 inch Multi-Groove Jaw Pads and 6 inch Aluminum Pads Set

WORKPRO #ad - Skidproof surface: the drawer pads have a waffle surface to hold round or hex parts and support flat parts well, the mutil-groove provides 5 round grooves and 90°&45° clamping angles.

Non-marring: aluminum vise jaws with drawer type soft pads are designed to protect hard workpieces, and the tough multi-groove pads perform well on protecting soft workpieces. Multi-purpose: these vice jaw pad set can be used on many kind of vices and will help with protecting surfaces of wood, metal, plastic, tubing or any other workpieces using on a vice. Two pack: the set include 6 inch soft standard pads and 5-1/2 inch multi-groove jaw pads, Millers, will work with most Bench Vises, Drill Press, Clamps, and more. Strong magnets: embedded magnets on the pads attract them to the vise tightly, keep vise pads securely in place and hold the workpiece better.
BrandWORKPRO #ad



MYTEC Home Vise Clamp-On Vise,2.5"

MYTEC #ad - Easy to install: this bench vise can be installed on the edge of all kinds of desktops. Convenient and quick to install and remove;. Home vise: net weight 3. 31 lbs, maximum width of jaw opening 2. 5 inch, Jaw width 2. 0 inch;. Wide range of uses: this vise can hold a variety of parts,O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work;.

The table board up to 2. 4 inches thick can be clamped. Protect table top: during installation, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts To ensure good use of rubber gaskets, please refer to the product picture before use. Tips: please carefully browse our product photos to understand the size of each part of the vise before place an order.

Adjust the fixing chin to a larger opening first, there is no need for punching on the table, then install the rubber washer in the planned corresponding position, secure it in the end;. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason. We welcome you to contact us at any time, we will provide you with a satisfactory solution.
BrandMYTEC #ad
Manufacturerlinyihedongmeikegongjuyouxiangongshi #ad
Height3.15 Inches
Length7.4 Inches
Width6.34 Inches



HORUSDY 6" Universal Bench Vise Soft Jaw Cover, Waffle Face, Orange Urethane, Magnetic Retention

HORUSDY #ad - 2 pcs bench vise jaw grip Objects and Fits Most Vises. Thermoplastic Polyurethane TPU Material. Strong embedded Magnets Keep Inserts Securely in Place. 6x magnets Add Stability. Waffle grip anti-Slip Adds More Grip Points.
BrandHORUSDY #ad
ManufacturerHORUSDY #ad
Height2 Inches
Length6 Inches
Width4 Inches
Part Number97350



IRWIN Woodworking Vise, 3-Inch 226303ZR

IRWIN #ad - Can attach to tables up to 2" thick. Easy clamp-on feature for working almost anywhere. Anvil shaping horn incorporated into the design. Sturdy integrated pipe jaws keep the workpiece steady. 2" jaw capacity perfect for general purpose work.
BrandIRWIN #ad
ManufacturerIRWIN #ad
Height6.88 Inches
Length6.25 Inches
Weight4 Pounds
Width3.38 Inches
Part Number226303ZR
WarrantySatisfaction Guaranteed



MulWark 10pcs Gun Bolt Catch Roll Pin Punch Set & 35mm Small Double-Faced Soft Rubber Mallet Hammer Tool Kit, Corrosion Resistant Hand Pin Remover Tool with Holder for Automotive, Gunsmithing, Watch

MULWARK #ad - Small, e. G. Lifetime warranty: all mulwark tools are warranted to be free of defects in materials and workmanship for as long as you own the product, you may return this product free of charge with original purchase receipt or choose to get a replacement. The high quality chrome-vanadium steel with around hardness of 50 HRC can eliminate bending, flexing or broken when punched on; and the upgraded version tapered punch applied with classic natural finish with a dry-touch, rust-preventative coating have strong resistance to corrosion, abrasion or glaring damage.

Ar15/ ar-15 bolt catch grip pin, gas block roll pin, lightweight hand tools used to install / drive hollow pins, etc. Its lightweight hollow tubular steel handle shifts the weight balance toward head for extra power in each blow, and the cushioned non-slip rubber re-mold offers comfortable and firm grip. Use drop forged and heat treated steel to offer extreme durability, and the long, parallel ground shanks with knurled handle can achieve better grip, and come with a fashionable orange punches pouch that make it more standing out in your tool room and decrease the tediousness of repair/building work; the nylon storage case also offers a great organizing solution for the punches.

Specifically designed for jewelers, tension pins or split roll pins, watchmakers, trigger guard/ charging handle roll pin, vise block pin, gunsmith, bolt carrier group pin, foosball men roll pin, charging handle pins or any other machinery linkage pins, repairs and crafts. Comes with a 35mm replaceable double-faced comfort grip hammer mallet that deliver a perfect solid strike without damaging small parts or finished work surface.
BrandMULWARK #ad
ManufacturerMulWark #ad
Part NumberMLK-53758