Top 9 5/64 Cobalt Drill Bit – Core Drill Bits

As an Amazon Associate I earn from qualifying purchases.

1. DEWALT

#ad

DEWALT DWA1205 5/64" Pilot Point Industrial Cobalt Drill Bit

#ad
DEWALT #ad - Intended to be used on hard metals. Pilot point and split tip design. No bit walking - more user control. Designed for maximum speed and life.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height5.75 Inches
Length1.87 Inches
Weight0.02 Pounds
Width0.09 Inches
Part NumberDWA1205
ModelDWA1205

2. LudoPam

#ad

Stainless Steel, Pack of 10, M35 HSS Twist Jobber Length for Hardened Metal, 5/64 Inch Cobalt Drill Bit Set, Cast Iron

#ad
LudoPam #ad - Include: 10 pieces of 5/64-Inch cobalt drill bits. High quality material: 5% cobalt high speed Steel M35 provide extended tool life compared to ordinary drill bits.

Durable, higher Heat & Abrasion Resistance. Precise 135°split point & twist design: Prevent walking, clear chips and particles faster. Pay attention to speed, pressure and heat control during drilling. Particularly successful in cutting through hard metals such as stainless steel, hard plastics and woods, high temperature alloy, cast iron, titanium alloy, and also can be used for softer materials. Professional & widely use: m35 cobalt hss is more suitable for hardened material.
BrandLudoPam #ad
ManufacturerLudoPam #ad
Part NumberM35-2-10Pa

3. Drill Hulk

#ad

Stainless Steel, Jobber Length, Pack of 12, 5/64-Inch Cobalt Steel M35 Drill Bit, for Hard Metal

#ad
Drill Hulk #ad - Made from high-speed steel and 5% cobalt: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.

Jobber length: 5/64-inch cutting diameter, 1-Inch flute length, 2-Inch overall length, 118 degree point, straight shank. Application: best used for drilling in hard metal, including stainless steel. Include: 12 pieces of 5/64-Inch cobalt drill bits with case. Can be repeatedly sharpened as needed: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
BrandDrill Hulk #ad
ManufacturerDrill Hulk Ltd #ad
Weight0.04 Pounds
Part NumberDHCO22
ModelDHCO22

4. BOSCH

#ad

Bosch CO2132 5/64 In. x 2 In. Cobalt Drill Bit

#ad
BOSCH #ad - Rigid, thick web design adds stability to bit in tough applications. Withstands high-temperature applications for extended periods of time up to 1, 100 degreeF. Best used for drilling into light-gauge metal, high-carbon steel, cast iron, aluminum and ally steel, stainless steel and titanium. Surface hardened to penetrate tough abrasive materials. Available in jobber length, full shank.
BrandBOSCH #ad
ManufacturerBosch #ad
Height0.1 Inches
Length5.8 Inches
Weight0.01 Pounds
Width1.8 Inches
Part NumberCO2132
ModelCO2132

5. Hymnorq

#ad

4 Mini Sizes 3/64 Inch 1/16 Inch 5/64 Inch and 3/32 Inch, for Stainless Steel Cast Iron Aluminum, Extremely Heat Resistant, Hymnorq 40PC M35 Cobalt Steel Twist Jobber Small Drill Bits

#ad
Hymnorq #ad - 40pc fractional inch bits - the set includes 40pcs of m35 cobalt steel twist drill bits, 1/16" x 10pcs, 5/64" x 10pcs, 3/64" x 10pcs, and 3/32" x 10pcs. Try to adjust the RPM when it fails to penetrate. Welcome to download. Length of the bits: 3/641.

73", 1/161. 89", 5/642. 01", 3/322. 24". In most cases, including a RPM chart for several common metals, our customers would get a much better result with these tips. Not for hardened steel / high carbon steel. Downloadable user guide - we've summed up some tips of drilling metals, based on our reviews and some articles on the internet. Cobalt steel - manufactured from m35 cobalt steel, for much faster cutting and extra longer life span, measuring rockwell hardness up to 67, with molybdenum and cobalt added to create a hardened heat-resistant alloy, with up to twelve times compared with an average HSS drill bit.

For metalworking - particularly successful in cutting through hard metalshardness less than HRC38° such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Manufactured to German DIN338 standard. Packed in a plastic bag.
BrandHymnorq #ad
ManufacturerHymnorq #ad

6. Mudder

#ad

15 Pieces Cobalt Drill Bit Set M35 High Speed Steel Twist Drill Bit Set for Hardened Metal Stainless Steel Cast Iron Woodwork Plastic 5/64 Inch

#ad
Mudder #ad - Creative twist design: metal cobalt drills for hardened steel has 135° split point tip and torsional design to improve cutting speed with self-centering ability; They can avoid walking during work process, while clearing chips and particles more quickly and easily.

Quality material: the cobalt drill bit set uses cobalt m35 high speed steel as material, heat and abrasion resistance; The cutting edge of drill bit is hardened and honed, this material is durable, with a long service life, strong and practical, with accurate cutting without shaking. Nice features: the 5/64 inch twist drill bits have precise diameter; M35 cobalt drill bits for hardened metal are not easy to break or wear out, hand electric drill, so suitable for lithium electric drill, impact electric drill, etc.

What you will get: the package contains 15 pieces 5/64 inch cobalt drill bits, sufficient quantity to meet your various needs; Please pay attention to speed, pressure and heat control during drilling. Various fitness: m35 high speed steel cobalt drill set is greatly suitable for hardened material and hard metals, hard plastics, high temperature alloy, titanium alloy, stainless steel, etc. Such as cast iron, woods, also for soft materials.
BrandMudder #ad
ManufacturerMudder #ad
Part NumberMudder-389497

7. AimmiNate

#ad

Metal, Plastic, High Speed Steel HSS Titanium Micro Drill Bits for Wood, 60 PCS Mini Drill Bits Set, Aluminum Alloy, Steel, 1/8 1/16 3/64 5/64 3/32 7/64 Small Drill Bit Set

#ad
AimmiNate #ad - Ideal for diy, steel, wood, home and general building/engineering using. The drill bit set fits into the majority of power drills currently on the market. The cutting edge is hardened and honed for sharpness, chatter-free design with staggered cutting teeth ensure the precise countersinking and hole smooth clean.

Flutes form& 135°split point2 flutes form helps clear chips and debris away from the mini drill bit, decreasing friction and heat for a faster, cooler drilling process. Professional & diy usesmall drill bits for soft metal, ceramic, plastic within 5mm thickness. Combo set of 60 pcs60 pcs twist drill bit set. Not for glass, masonry or concrete drilling. 135° split point with straight shank prevents walking and makes drilling precise. Contact us or amazon message, 10x1/8'', 10x7/64'', if you meet any issues or have some advice.

We answer your questions in less than 24 hours, 10x2/64'', 10x1/16'', total 60 pieces, 10x5/64'', 10x3/32'', until you are satisfied. Premium hss titanium coatingindustry grade high speed steel with high hardness, titanium coating increases wear-resistance and durability. What you get60 pcs drill bit set, can meet your different needs perfectly. Please feel free to buy. 6 most commonly-used sizes 2/64", 1/8" to satisfy all needs, 5/64", 7/64", 3/32", 1/16", 10 pieces per size for easy replacement.
BrandAimmiNate #ad
ManufacturerAimmi #ad
Height3.9 Inches
Length3 Inches
Width0.2 Inches
Part NumberHSS Titanium

8. DRILLFORCE

#ad

DRILLFORCE20-piece 5/64" Round Shank HSS M35 Cobalt Twist Drill Bits for Metal 5/64

#ad
DRILLFORCE #ad - High quality material- high speed Steel Cobalt -M 35 Cobalt Steel Best Material. 20pcs, ideal for drilling on mild steel, copper, 5/64", hss cobalt twist drill Bits, aluminum, Zinc alloy etc. Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel. 118-degree split-point tip starts drilling immediately with less force and eliminates "walking" across the work surface. High efficiency In Drilling Metals, and Stainless Steel.
BrandDRILLFORCE #ad
ManufacturerDRILLFORCE #ad
Part Number20060-20

9. MaxTool

#ad

MaxTool 29 Pieces Drill Set 29PCs/29-Piece Twist Drill Bit Set 8% Cobalt HSS M42 Fully Ground 1/16“ to 1/2”x64th Fractional; JBS42G10R029P

#ad
MaxTool #ad - Premium 8% cobalt high speed steel m42 Hardness up to HRC66 provides all drills power cutting, impressive performace and long tool life. Precision fully ground edges and flutes ensure fast drilling, excellent chips moving smoothly and ultimate accuracy.

135-degree split point prevents "Walking", reduce logging, and penetrates hard material without a pilot hole. Golden surface finish resists corrosion and increases the hardness of the drill bits for cutting hard steel, wood, other metals, and plastic. Drill bits include: 1/16, 7/32, 1/4, 9/64, 31/64, 23/64, 19/64, 21/64, 15/64, 5/32, 13/32, 15/32, 29/64, 25/64, 5/16, 5/64, 1/2 inch, 11/32, 1/8, 11/64, 27/64, 3/32, 17/64, 13/64, 7/16, 9/32, 3/16, 7/64, 3/8, 1/16 0.0625 to 1/2" 05 in 1/64" increments.
BrandMaxTool #ad
ManufacturerTianshun Tools #ad
Height2.36 Inches
Length7.87 Inches
Weight1530 Grams
Width4.72 Inches
Part NumberJBS42G10R029P