Top 8 Uponor Pex Manifold – Pipe Fittings

As an Amazon Associate I earn from qualifying purchases.

1. Uponor Wirsbo


Uponor Q2237550, EP Branch Multi-Port Tee w/ 3/4" Inlet and 1/2" Outlets 3 Outlets

Uponor Wirsbo #ad - Must be used with expansion rings and expansion tool sold separately. Lead free. For propex expansion PEX water systems. Engineered Plastic. 3/4" inlet and 3 1/2" Outlets.
BrandUponor Wirsbo #ad
ManufacturerUponor Wirsbo #ad
Weight0.1 Pounds
Part NumberQ2237550

2. Alco


10-pk 3/4 x 1/2 x 1/2" Tee- 3/4" on one end Poly- Pex-A F1960 Expansion Type-Alco Brand- For Uponor/Wirsbo and Other Type A Pex- Requires Expansion Tool and Rings-NOT INCLUDED

Alco #ad - Better performance than brass fittings in RO, chlorinated, and low-pH water application. Installed using expansion method-expander tool + expansion rings- which are not included. Compatible with all type A Pex/Pert tubing designed for use with F1960 fittings. Not made by uponor ! product is made by the Allen co. Specifically for use on Uponor and other type A expansion pex.
BrandAlco #ad
ManufacturerAlco #ad
Part NumberFPEX460-0118P-10

3. Uponor Wirsbo


Uponor A2670401 EP Heating Manifold Assembly with Flow Meter, 4-Loop

Uponor Wirsbo #ad - Mounts on a bracket included in the assembly packaing. Comes fully assembled right out of the packaging. Features isolation and balancing valves with flow meters for precise temperature control. Body ends feature r32 unions and loop outlets have R20 male threads. Use only propylene glycol in radiant systems with EP Heating Manifolds; never use ethylene glycol.
BrandUponor Wirsbo #ad
ManufacturerUponor Wirsbo #ad
Weight5 Pounds
Part NumberA2670401

4. Viega


Viega 50143, 1/2-Inch PureFlow Zero Lead Poly Alloy PEX Crimp Manabloc With 14 Ports, 8 Cold 6 Hot

Viega #ad - Excellent chlorine resistance. Polyalloy port adapters. Homerun distribution manifold. Reduced flow noise. Proven quality and non-corroding.
BrandViega #ad
ManufacturerViega PEX #ad
Height4.5 Inches
Length17.63 Inches
Weight5.41 Pounds
Width9 Inches
Part Number50143
WarrantyLimited Warranty



Full Port, Pex A Pipe, Brass, 1 Red/Hot and 1 Blue/Cold, 2 Pieces XFITTING Propex Expansion F1960 3/4" Ball Valve, Sious Chief, for Uponor Wirsbo

PROPEX EXPANSION VALVE XFITTING #ad - Approved to be used underground and behind walls without access panels. Xfitting expansion compatible with all types and brands of PEX A Tubing, Sious Chief, UponorWirsbo, Etc.400 psi, connection systems: Expander tool + Pex Sleeves / Ring,. Design certified to ansi/nsf-61 and assE 1061 product standard for use in potable water and hydronic heating water distribution.
ManufacturerXFITTING #ad
Weight0.83 Pounds



Pack of 25 EFIELD 3/4 Inch F1960 Expansion Rings/Sleeves for Pex A Piping System

EFIELD #ad - Pack of 25. Certified to ansi/nsf-61 and ASSE 1061 Product Standard. For use with 3/4" Pex-a Tubing. This efield product is compatible with all Types of Brands of Pex A Pipe/Tubing, Sious Chief, UponorWirsbo, Etc. Only for pex a pipe/Tubing and Fitting Connection. Meet the standard f1960 .
BrandEFIELD #ad
ManufacturerEfield #ad
Part NumberEF



EFIELD Washing Machine Outlet Box with Center Drain with Brass 1/4 Turn Valves Installed, with Stainless Steel Arrestor, White, 1/2" Pex-a F1960 Expansion Fitting Connection x 3/4" MHT Connection

EFIELD #ad - Both central and Side Drain Design. With stainless Steel Water Hammer Arrestors Installed. Lead free 1/4-turn hot and cold brass Ball Valve. This efield product is compatible with expanding Fitting System, NOT Compatible with Stainless Steel Clamp & Copper Crimp Ring Systems. Equipped with 1/2 inch pex-a expansion Inlet and 3/4 inch Male Hose ThreadMHT. Measures 9. 25 inch x 3. 5 inch x 8 inch; includes a Pre-installed Support Bracket, a Faceplate Cover;.
BrandEFIELD #ad
ManufacturerEFIELD #ad
Height3.5 Inches
Length8 Inches
Width8 Inches
Part Numbermh

8. Uponor


Uponor A1140500 1/2" Wirsbo hePEX, 100-ft. coil

Uponor #ad - Oxygen barrier conforms to DIN 4726 for use in closed-loop hydronic piping and radiant heating and cooling applications. Listed by the hydrostatic stress board of ppi at 200°f 93. 3°c at 80 psi, 180°F 82. 2°c at 100 psi and 73. 4°f 23°c at 160 psi. Pex-a manufacturing process for superior flexibility, durability, and resilience in freezing conditions. Backed by a 25-year transferable limited warranty. Compatible with propex astm F1960 expansion fittings and QS-style fittings.
BrandUponor #ad
ManufacturerUponor #ad
Height0.35 Inches
Length1200 Inches
Weight15 Pounds
Width0.35 Inches
Part NumberA1140500