Top 8 Swage Lag Screws – Lag Screws

As an Amazon Associate I earn from qualifying purchases.

1. BLIKA

#ad

BLIKA 64 Pack Stainless Steel Left & Right Handed Thread Lag Screws for 1/8" Cable Railing, Cable Railing Kits for Wood Post, with Spanner Multi Tool, Lag Screw Swage System

#ad
BLIKA #ad - Thread length = 2", thread diameter = 1/4", Hole Size = 1/8", Overall Length = 4". Perfect for planning your DIY cable railing project, staircases, balconies and decking areas. Applications: left & right hand threaded swage lag screws fit for 1/8" stainless steel cable.

Lag screw system is a streamline stainless steel wire balustrade systems for straight, stair or angled sections when using timber posts. Package list: 32 x left hand threaded lag screws + 32 x Right Hand Threaded Lag Screws + 1 x Spanner Multi Tool + A Free Drill Bit. 80mm spaces for 1/8 diameter wire because the required wire tensions at greater spacings would require the tension to be beyond the wire safe load limit.

Size: for 1/8 inch stainless steel cable. Material: made of stainless steel t316 marine grade. Easy to use: the lag screw has a pull out strength of 580kg. High tensile strength and anti-fatigue strength Weatherproof, super strong resistance to rust and corrosion which make our balustrade hardware suitable for coastal installations. Blika high-quality stainless steel wire balustrade hardware that is suitable for indoor and outdoor applications.
BrandBLIKA #ad
ManufacturerBLIKA #ad
Height50 Centimeters
Length100 Centimeters
Weight100 Kilograms
Width100 Centimeters
Part NumberPackage Includes:


2. Steel DN Mate

#ad

T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Cable Railing Kit, Wrench Included, 60 Packs Deck Railing Hardware/Stair Deck Railing, DIY Wood Baluster Kit

#ad
Steel DN Mate #ad - This deck railing hardware fit 1/8" od cable of railing system. The thread screws are designed for timber/wood post. This cable railing kit includes 30 pcs left, and 2 drill bit. Products without Left & right will bring you hassle and might damage the cable. Deck and stair cable railing system is not only simple but also won't block your view.

By the design of right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system. Length of cable should be 1-1/2"  shorter than wood surface distance(as shown in pic. 4; if you want to diy a high quality cable railing system, standard 1/8" OD cable which was made of T316-stainless steel is recommended. The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle or tensioner.

Hydraulic crimper is needed to connect the cable to lag screws. New deck railing design, anti-rust, we update this tool with a free, clean and elegant. And this cable railing won’t be easily unfixed or destroyeded. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. Stainless steel t316 material, 30pcs right hand thread lag screws, water and corrosion,marine Grade, good for indoor or outdoor usage. Pls note that, specially customized wrench.
BrandSteel DN Mate #ad
ManufacturerDNMATE #ad
Weight20.4 ounces
Part NumberDM03

3. Steel DN Mate

#ad

DIY Wood Baluster Kit, T316 Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8" Cable Railing Kit, 40 Packs Deck Railing Hardware/Stair Deck Railing, Wrench Included

#ad
Steel DN Mate #ad - Length of cable should be 1-1/2"  shorter than wood surface distance(as shown in pic. 5; if you want to diy a high quality cable railing system, standard 1/8" OD cable which was made of T316-stainless steel is recommended. This deck railing hardware fit 1/8" od cable of railing system.

Pls note that, clean and elegant. Deck and stair cable railing system is not only simple but also won't block your view. The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle or tensioner. It will rotate the wire rope in the same direction, which resolves the problem of twisting the attached wire. And this cable railing won’t be easily unfixed or destroyeded. By the design of right&left handed thread, of course it can be used to adjust the tension of attached cable, so the turnbuckles are not needed in the railing system.

New deck railing design, specially made wrench from 22th, May, water and corrosion,marine Grade, the earlier orders were not included wrench, 20pcs right hand thread lag screws, we update this tool with a free, good for indoor or outdoor usage. Products without Left & right will bring you hassle and might damage the cable. This cable railing kit includes 20pcs left, anti-rust, and a drill bit. Hydraulic crimper is needed to connect the cable to lag screws.
BrandSteel DN Mate #ad
ManufacturerDNMATE #ad
Weight20.4 ounces
Part NumberDM02

4. ZONEGRACE

#ad

ZONEGRACE Swage Lag Screws Left & Right 64 Pack for 1/8" Deck Cable Railing Systems, 316 Stainless Steel Stair Deck Railing Wood Post Balusters for Cable Deck Railing Hardware 32 Pairs

#ad
ZONEGRACE #ad - This swage lag screws used integrated design,So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper;. This cable railing kit include 32-pcs right and 32-pcs left hand thread lag screws; Kit made of T316 –stainless steel,So it can be used indoor or outdoor;.

This deck railing hardware fit 1/8-inch od cable of railing system,The thread screws were designed for wood post,Length of lag screw is 4 inch and length of its thread is 2 inch;. By the design of right&left handed thread, so the turnbuckles are not needed in the railing system, of course it can be used to adjust the tightness of cable, And this cable railing can’t be easily unfixed and damaged by outsiders.

Note:length of cable should be 1. 5 inch shorter than wood post edge distance; if you want To DIY a high quality railing system,Standard 1/8 inOD cable which was made of T316-stainless steel is recommended;.
BrandZONEGRACE #ad
ManufacturerZonegrace #ad

5. Senmit

#ad

316 Stainless Steel Stair Deck Railing Wood Post Balusters System, Senmit Swage Lag Screws Left & Right 60 Pack for 1/8" Cable Railing

#ad
Senmit #ad - Cable crimper need-Use Senmit Hydraulic Crimping tool to hold the cable. T316 marine grade- stainless steel Screw Fitting Terminal For 1/8" Cable Wire Rope Railing. No need turnbuckle-No need Turnbuckle to tension the stainless steel cable. Left & right thread- used to mount the 1/8" wire rope cable in the wooden Balusters. Thread length = 2", hole size = 1/8", thread Diameter = 1/4", Overall Length = 4".
BrandSenmit #ad
ManufacturerSenmit #ad
Part NumberWT-30P

6. CKE

#ad

CKE Upgraded 72 Pack Stainless Steel Right&Left Handed Thread Swage Lag Screws for 1/8 inch Cable Railing Kit, Decking Railing Hardware, DIY Baluster Kit

#ad
CKE #ad - Left & right hand threaded Swage Lag Screws fit for 1/8" stainless steel wire rope cable. Left & right design: this cable railing kit design with Left hand lag screws and Right hand Lag Screws. This design can rotate wire rope to the same direction, which resolves the problem of twisting the wire rope.

The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle or tensions, make your installation more easier, beautiful and secure. Material: made of t316 marine-grade stainless steel. Package: 36 pack left hand threaded lag screws + 36 pack Right Hand Threaded Lag Screws + 1 pack Spanner Multi Tool and 1 pack Drill Bit.

Features: this stainless steel cable railing kit perfect for installing a diy cable railing system. High tensile strength and anti-fatigue strength Weatherproof, super strong resistance to rust and corrosion. Size: thread length: 2", hole size: 1/8", thread diameter :1/4", Overall Length: 4". Excellent for both outdoor and indoor applications.
BrandCKE #ad
ManufacturerCKE #ad

7. Muzata

#ad

Muzata Swage Lag Screws Left & Right 20 Pack for 1/8" Cable Railing,T316 Stainless Steel Stair Deck Railing Wood Post for Horizontal Vertical Balusters 10 Pairs CK17,Series CA1 CD1 CS1

#ad
Muzata #ad - Excellent for both outdoor and indoor applications. Products without Left & right will bring you that hassle and might damage the cable. You can diy to install a cable railing system. The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle or tensioner.

This kind of cable railing system keeps itself from damaging and removing by other people. These high quality stainless steel swage lag screws are fit for 1/8 inch wire rope cable, they are designed for decades using. It includes project design, a shopping list, products recommendation, protector sleevesMUZATA CR13, and an estimated budget. You could search for these part numbers to work better with this: customized hydraulic crimper muzata cr09, 30 degrees angle beveled washerMUZATA CR25. Left & right : this cable railing kit set includes left hand lag screws 20pack and right hand lag screws 20pack.

This kit fits both horizontal and vertical balustrade for a clean look. Deck and stair cable railing system is not only pretty but also won't block the view. Material: this deck railing kit is made of T316 marine grade stainless steel, super strong resistance to rust, water and corrosion. It will rotate wire rope to the same direction, which resolves the problem of twisting the wire rope. Please contact us by clicking the blue letters "sold by Muzata" below “add to cart" button on this page.
BrandMuzata #ad
ManufacturerMUZATA #ad
Part NumberMZZ287
ModelCK17

8. Muzata

#ad

Muzata Handed Thread Swage Lag Screws Left & Right 10Pack for 1/8"Cable Railing Kit,T316 Marine Grade Stainless Steel Stair Deck Post DIY Baluster Hardware CK17 5 Pairs,Series CA1 CD1 CS1

#ad
Muzata #ad - This stainless steel screw stud thread fittings are perfect to fix 1/8 inch 3. 2mm wire rope cable search muzata wr01 to work with muzata brand into the balusters post, Recommended to work with Muzata Cable railing Sleeve, search for MUZATA CR13will give you amazing look. Stainless steel screw fitting terminal, overall length 4", high tensile strength and anti-fatigue strength weatherproof, This deck railing hardware fit 1/8-inch OD cable of railing system, thread length 2", The thread screws were designed for wood post.

This cable railing kit include 5pcs right and 5pcs left hand thread lag screws, super strong resistance to rust, made of T316 marine grade stainless steel, water and corrosion. Excellent for both outdoor and indoor applications. This swage lag screws need muzata custom hydraulic hand crimper swaging tool to connect stainless steel cable to the railing fittings, cable cutterMUZATA CR12;protector sleevesMUZATA CR13;30 degree angle beveled washerMUZATA CR25, search for MUZATA CR09.

1/8 stainless steel cable wire rope muzata wr01, stemball swageMUZATA CR24 threaded terminal stud endMUZATA CR23. If you want invisible lag screws, please search MUZATA CG1. This cable railing kit includes 5pcs left hand lag screws and 5pcs right hand lag screws. It will rotate wire rope cable at the same direction, which resolves the problem of twisting the wire rope. Products without Left & right will bring you that hassle and might damage the cable. This kit fits both horizontal and vertical balustrade for a clean look.
BrandMuzata #ad
ManufacturerMUZATA #ad
Part NumberMZZ143
ModelCR22