Top 8 Channel Locks Pliers – Tongue-and-Groove Pliers

As an Amazon Associate I earn from qualifying purchases.

1. Craftsman

 #ad

2-Piece Groove Joint Set CMHT82547, CRAFTSMAN Pliers, 8 & 10-Inch

#ad
Craftsman #ad - Precision machined jaws for gripping, and holding. 2-piece set. Drop forged steel for strength and durability. Multi-zone bi-material grips for comfort and control. Full lifetime warranty, refer to "Warranty & Support" section below for full details.
BrandCraftsman #ad
ManufacturerCRAFTSMAN #ad
Part NumberCMHT82547
ModelCMHT82547

2. Channellock

 #ad

9.5-Inch, 6.5-Inch | Groove Joint Pliers | Laser Heat-Treated 90° Teeth| Forged from High Carbon Steel | Patented Reinforcing Edge Minimizes Stress Breakage | Made in USA, Channellock GS-3 3 Piece Straight Jaw Tongue and Groove Pliers Set, 12-Inch

#ad
Channellock #ad - 5" & 12" tongue & groove. Patented reinforcing edge minimizes stress breakage. 5", 9. Channellock uses high-carbon steel for superior performance on the job and specially coated for ultimate rust prevention. Set includes: 6. Undercut tongue & groove design won't slip. Channellock Blue grips for comfort. Permalock fastener eliminates nut and bolt failure. Right angle, laser heat-treated teeth grip better and last longer.
BrandChannellock #ad
ManufacturerChannellock #ad
Height1 Inches
Length16 Inches
Weight2.6 Pounds
Width9.25 Inches
Part NumberCHLGS-3
ModelGS-3

3. Channellock

 #ad

Blue, Black, Channellock 440 Tongue and Groove Pliers | 12-Inch Straight Jaw Groove Joint Plier with Comfort Grips | 2.25-Inch Jaw Capacity | Laser Heat-Treated 90° Teeth| Forged High Carbon Steel | Made in USA, Silver

#ad
Channellock #ad - Right angle, laser heat-treated teeth grip better and last longer. Undercut tongue & groove design won't slip. Permalock fastener eliminates nut and bolt failure. Channellock uses high-carbon steel for superior performance on the job and specially coated for ultimate rust prevention. Patented reinforcing edge minimizes stress breakage. Made in the USA. Channellock blue grips for comfort.
BrandChannellock #ad
ManufacturerChannellock #ad
Height0.5 Inches
Length12 Inches
Weight1.64 Pounds
Width1.81 Inches
Part Number440
Model440
WarrantyAll CHANNELLOCK pliers, wrenches, and drivers are warranted for material and/or workmanship. Tools are not warranted against abuse or wear from faithful service.

4. Channellock

 #ad

Channellock GS-3SA 3 Piece Straight Jaw Tongue and Groove Pliers Set with bonus 6-in-1 Professional Screwdriver | Laser Heat-Treated 90° Teeth| Forged from High Carbon Steel | 100% Made in USA

#ad
Channellock #ad - Patented reinforcing edge minimizes stress breakage. Right angle, laser heat-treated teeth grip better and last longer. Undercut tongue and groove design won't slip. Replaces channellock's GS-3S. Channellock uses high-carbon steel for superior performance on the job and specially coated for ultimate rust prevention.
BrandChannellock #ad
ManufacturerChannellock #ad
Height1.65 Inches
Length15 Inches
Weight2.96 Pounds
Width9 Inches
Part NumberGS-3SA
ModelGS-3SA
WarrantyWarranted for material and/or workmanship. Not warranted against abuse or from wear from faithful service

5. IRWIN

 #ad

2-Piece 2078709, V-Jaw, IRWIN VISE-GRIP GrooveLock Pliers Set

#ad
IRWIN #ad - All-purpose jaw grips on round, flat, square and hex shapes. Each pair of locking pliers has a press-and-slide button that quickly adjusts the lower jaw. More groove positions provide the optimum hand location for a better grip on the workpiece.

Irwin vise-grip pliers set includes 8-inch and 10-inch GrooveLock locking pliers. Non-slip, anti-pinch ProTouch Grips provide extra comfort and reduce hand fatigue. More groove positions provide the optimum hand location for a better grip on the work piece. Protouch grips provide extra comfort and help reduce hand fatigue while using each pair of locking pliers.

Ratcheting action allows grooveLock pliers to be adjusted from the open position up to the work piece by pushing the handle up without press the button. All purpose v-jaws grip on round, flat, square and hex shapes. Press-n-slide buttons adjust lower jaws 2X faster than traditional groove joint pliers.
BrandIRWIN #ad
ManufacturerIRWIN #ad
Height11.6 Inches
Length0.75 Inches
Weight1.4 Pounds
Width7 Inches
Part Number2078709
Model2078709
WarrantyFull Lifetime Guarantee - Each IRWIN hand tool is warranted to be free from defects in material and workmanship for the life of the tool under normal wear and tear, except for damage caused by misuse or alteration.

6. WORKPRO

 #ad

Pipe & Fittings, Gripping, WORKPRO 3 Piece Groove Joint Pliers Set, 12/10/8 Inch Adjustable Water Pump Pliers, Straight Jaw Pliers in CRV Steel for Home Repair, Nuts, Bolts

#ad
WORKPRO #ad - With the 1-3/8 - 2-3/8 inch straight jaw, it allows you to grip any pipes, nuts, or bolts. Adjustable tongue & optimum grip - the grip of these pliers is incredible. The best part is the grip doesn’t slip even if you put too much pressure on it.

Ergonomic & comfortable handle - workpro water pump pliers are ergonomically designed and easy to hold and grip with. Built to last - the high-quality chrome vanadiumCR-V steel is in the manufacture of this tool has been subject to processes that allow it to be extremely durable and hardened to handle even the most demanding of conditions. Multi-purpose application pliers - our adjustable pliers makes a great addition to any home maintenance or on-the-job toolbox. What you get - comes with 8-inch groove joint straight jaw, and 12-Inch groove joint straight jaw provides the used with three different size pliers which will make your work easier, 10-Inch groove joint straight jaw, safer, and more efficient.

Perfect for plumbers and diY homeowners: gripping, tightening & loosening nuts, pulling, bolts, pipe & fittings. The handles are the right size and shape, fitting the hand very well, and it really does make quite a difference over a day's work.
BrandWORKPRO #ad
ManufacturerHANZGHOU GREATSTAR INDUSTRIAL CO.LTD #ad
Height1.57 Inches
Length13.39 Inches
Width7.09 Inches
Part NumberW001339A

7. Channellock

 #ad

Channellock 480 BIGAZZ Tongue and Groove Pliers | 20.25-Inch Straight Jaw Groove Joint Plier | 5.5-Inch Jaw Capacity | Laser Heat-Treated 90° Teeth| Forged High Carbon Steel | Made in USA

#ad
Channellock #ad - Patented reinforcing edge minimizes stress breakage. Channellock blue grips for comfort. Permalock fastener eliminates nut and bolt failure. Right angle, laser heat-treated teeth grip better and last longer. Made in the USA. Undercut tongue & groove design won't slip.
BrandChannellock #ad
ManufacturerChannellock #ad
Height1 Inches
Length23 Inches
Weight0.51 Pounds
Width6 Inches
Part Number480
Model480
WarrantyAll CHANNELLOCK pliers, wrenches, and drivers are warranted for material and/or workmanship. Tools are not warranted against abuse or wear from faithful service.

8. IRWIN

 #ad

3-Piece 1773638, IRWIN Tools VISE-GRIP Groove Joint Pliers Set

#ad
IRWIN #ad - Lifetime Guarantee. Includes gj6, gj8 and GJ10R models. Includes gj6, gj8 and GJ10R models. 3-piece irwin vise-grip pliers set contains 6-inch, 8-inch and 10-inch straight-jaw pliers. Protouch grips provide extra comfort and help reduce hand fatigue. Protouch grips provide extra comfort and help reduce hand fatigue. Right-angle teeth grip in all directions for maximum bite. Right-angle teeth grip in all directions for maximum bite. 3-piece irwin vise-grip pliers set contains 6-inch, 8-inch and 10-inch straight-jaw pliers. Lifetime Guarantee.
BrandIRWIN #ad
ManufacturerIrwin Tools #ad
Height12 Inches
Length12.19 Inches
Weight1.9 Pounds
Width9.19 Inches
Part Number1773638
Model1773638
WarrantyLifetime Guarantee