Top 8 Anaerobic Gasket Maker – Gasket Sealers

As an Amazon Associate I earn from qualifying purchases.

1. Permatex

#ad

Red, 50 ml Tube , Permatex 51813 Anaerobic Gasket Maker

#adPermatex #ad - Fills gaps up to. 015" and cures to a solvent-resistant seal that will not tear or decay during service. Original equipment Manufacturer OEM specified, non-corrosive material. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable. Suggested applications: water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, o-ring replacement. Parts disassemble easily even after extended service and old gasket material can be removed in minutes with a simple putty knife.

Brand	Permatex #ad
Manufacturer	Permatex #ad
Height	8 Inches
Length	1.5 Inches
Weight	0.17 Pounds
Width	3.81 inches
Part Number	51813
Model	51813
Warranty	Manufacturer

2. Loctite

#ad

Loctite 518 Gasket Maker Flange Sealant, 50 Milliliter Tube 2096059

#adLoctite #ad - Parts disassemble easily, even after extended service, and old gasket material can be removed with a putty knife. Premium.

Noncorrosive anaerobic designed primarily for use on aluminum, iron and steel flanged mating surfaces. Fills gaps up to 0050" 1. 27 mm and forms a flexible, solvent-resistant seal that will not tear or decay. Fills & seals. Design use. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is out of stock. Applications. Water pumps, thermostat housings, transaxle casings, transmission case covers, transmission pans, O-ring replacement. Easy to use.

Brand	Loctite #ad
Manufacturer	Loctite #ad
Height	1.4 Inches
Length	8 Inches
Weight	0.18 Pounds
Width	3.75 Inches
Part Number	2096059
Model	2096059
Warranty	No

3. Loctite

#ad

50 ml Tube, Loctite Sealant, High Flex Gasket Maker, Silicone, Each, Anaerobic

#adLoctite #ad - Part number: lOC555354. Country of Origin : United States. Package dimensions: 7 l x 1. 7 h x 2. 3 w inches. Package weight : 01 pounds.

Brand	Loctite #ad
Manufacturer	Loctite #ad
Height	1.4 inches
Length	3.8 inches
Weight	0.18 Pounds
Width	8 inches
Part Number	LOC555354
Model	LOC555354

4. Loctite

#ad

300 Milliliter 2096063, Loctite 518 Non-Corrosive Anaerobic Gasket Maker Flange Sealant

#adLoctite #ad - Parts disassemble easily, even after extended service, and old gasket material can be removed with a putty knife. Fills & seals.

Ideal for on-the-spot and emergency repairs, or when a conventional gasket is out of stock. Design use. Applications. Fills gaps up to 0050" 1. 27 mm and forms a flexible, solvent-resistant seal that will not tear or decay. Water pumps, transmission pans, thermostat housings, transmission case covers, transaxle casings, O-ring replacement. Easy to use. Premium. Noncorrosive anaerobic designed primarily for use on aluminum, iron and steel flanged mating surfaces.

Brand	Loctite #ad
Manufacturer	Loctite #ad
Part Number	2096063
Model	2096063
Warranty	No

5. Permatex

#ad

Permatex 51580 Anaerobic Flange Sealant, 300 ml Cartridge

#adPermatex #ad - For use on rigid machined flanges with less than. 015 inch gap. Eliminates preformed, paper, pre-cut, rubber and cork gaskets. Original equipment manufacurer OEM approved, for use where 'anaerobic' gasket is specified. Flexes with flanges that move in service. Suggested applications: water pumps, timing covers, engine cases, transmission pans, transaxle casings, thermostat housings, transmission case covers, and o-ring replacement.

Brand	Permatex #ad
Manufacturer	Permatex #ad
Height	9 Inches
Length	2 Inches
Weight	0.6 Pounds
Width	2 Inches
Part Number	51580
Model	51580

6. Loctite

#ad

Loctite 515 Gasket Maker & Flange Sealant for Automotive: High Temp, 50mL PN: 555352, Anaerobic | Purple, Medium-Strength

#adLoctite #ad - Reliable adhesion. Works on all metals, corrosion protection oils, plated surfaces & tolerates minor contamination by oils e. G. Adds flexibility to rigid machined flanges that move in service & eliminates the need for preformed, paper, rubber & cork gaskets.

Loctite 515 is designed for close fitting flanged parts with gaps up to 025 mm 001 in. With primer, sets in 15m – 2hrs. Flexes with movement. Motor oils, including passive substrates e. G. Well suited for automotive and other applications such as water pumps, transaxle casings, thermostat housings, transmission pans, transmission case covers, O-ring replacement. Stainless steel, aluminum, cutting fluids. Easily removable. Convenient curing. Without primer, sets in 1-12hrs.

Brand	Loctite #ad
Manufacturer	Loctite #ad
Height	1.7 Inches
Length	7.1 Inches
Weight	0.15 Pounds
Width	3.75 Inches
Part Number	555352
Model	LOC555352

7. Permatex

#ad

Permatex 82194 Ultra Grey Rigid High-Torque RTV Silicone Gasket Maker, 3.5 oz.

#adPermatex #ad - Low odor and non-corrosive formula. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Designed specially for high-torque and high vibration applications. Suggested applications: valve covers, oil pans, water pumps, timing covers, intake manifold end seals, thermostat housings.

Brand	Permatex #ad
Manufacturer	Permatex #ad
Height	8 Inches
Length	1.2 Inches
Weight	0.26 Pounds
Width	3.8 Inches
Part Number	82194
Model	82194
Warranty	Manufacturer Warranty

8. Genuine Chrysler

#ad

Genuine Chrysler Accessories 4318083 Gasket Maker, 50 ml Tube

#adGenuine Chrysler #ad - Use when assembling metal-to-metal components. Anaerobic sealer fills gap. Specially formulated gasket maker. Genuine oEM Chrysler fluid. Excellent resistance to solvents.

Brand	Genuine Chrysler #ad
Manufacturer	Chrysler #ad
Weight	0.3 Pounds
Part Number	4318083
Model	4318083