Top 6 Headstock Spindle Adapter – Power Lathe Accessories

As an Amazon Associate I earn from qualifying purchases.

1. PSI Woodworking

#ad

PSI Woodworking LA11418 Lathe Headstock Spindle Adapter 1-1/4" x 8tpi to 1" x 8tpi

#adPSI Woodworking #ad - Allows a 1-1/4" x 8tpi threaded spindle to accept 1" x 8tpi threaded chucks, faceplates, and other woodturning tools and accessories. Convert a 1-1/4" x 8tpi lathe headstock spindle to 1" x 8tpi. Flats allow for solid wrench tool grip for tightening and loosening from spindle. Wrench not included. Made of steel; weighs 1. 35 pounds; extends spindle length approximately 1-1/2".

Brand	PSI Woodworking #ad
Manufacturer	PSI Woodworking #ad
Height	2.5 Inches
Length	4.5 Inches
Weight	1.35 Pounds
Width	2.5 Inches
Part Number	LA11418
Model	LA11418
Warranty	2 Years Under Normal Use

2. U/D

#ad

Woodworking Lathe Headstock Spindle Adapter 1-1/4" x 8tpi to 1" x 8tpi

#adU/D #ad - This will extend the spindle length by approximately 1-1/2". Greatly extend the service life. Install the external thread of the chuck: 1" x 8 TPI. Convert a 1-1/4" x 8tpi lathe headstock spindle to 1" x 8TPI. The adapter body is made of hard steel. Install the internal thread of the spindle: 1 1/4" x 8 TPI. The weight of the adapter is 1. 34lb. The length is 2. 75" and the width is 2. 1".

Brand	U/D #ad
Manufacturer	OUYI #ad
Part Number	OUYI

3. U/D

#ad

Woodworking Lathe Headstock Spindle Adapter,Converts 1"x8 TPI to 1-1/2-8 TPI

#adU/D #ad - This will extend the spindle length by approximately 1-1/2". The weight of the adapter is 053lb. Convert a 1"x8 tpi lathe headstock spindle to 1-1/2-8 TPI. Greatly extend the service life. The adapter body is made of hard steel. The length is 1. 57" and the width is 1. 77". Install the internal thread of the spindle: 1"x8 TPI. Install the external thread of the chuck: 1-1/2-8 TPI.

Brand	U/D #ad
Manufacturer	LECHANG #ad
Part Number	LECHANG

4. U/D

#ad

Woodworking Lathe Headstock Spindle Adapter 1" x 8TPI to 3/4" x 16TPI

#adU/D #ad - The length is 2. 36" and the width is 1. 5". Greatly extend the service life. Install the external thread of the chuck: 3/4" x 16TPI. This will extend the spindle length by approximately 1-1/2". Convert a 1" x 8tpi lathe headstock spindle to 3/4" x 16TPI. Install the internal thread of the spindle: 1" x 8TPI. The weight of the adapter is 057lb. The adapter body is made of hard steel.

Brand	U/D #ad
Manufacturer	OUYI #ad
Part Number	OUYI

5. U/D

#ad

Converts 5/8" Shopsmith to 1" x 8TPI, Lathe Headstock Spindle Adapter

#adU/D #ad - The adapter body is made of hard steel. Greatly extend the service life. Install the external thread of the chuck: 1" x 8 TPI. This will extend the spindle length by approximately 1-1/4". The length is 2. 5" and the width is 1. 77". Convert a 5/8" shopsmith lathe headstock spindle to 1" x 8TPI. The weight of the adapter is 061lb. Install the internal thread of the spindle: 5/8" Shopsmith.

Brand	U/D #ad
Manufacturer	LECHANG #ad
Part Number	LECHANG

6. Hurricane Turning Tools

#ad

Converts Unthreaded 5/8" Shopsmith to 1" x 8TPI, Lathe Headstock Spindle Adapter, Hurricane Turning Tools

#adHurricane Turning Tools #ad - Material: Steel. Mount: female unthreaded hole with Set Screw for 5/8" Shopsmith unthreaded shaft with flat. Male thread mount: 1" x 8 TPI.

Brand	Hurricane Turning Tools #ad
Manufacturer	Hurricane Turning Tools #ad
Height	2 Inches
Length	2 Inches
Weight	0.5 Pounds
Width	2 Inches
Part Number	HTT-ACC-HSA-3