Top 6 Bridgeport Milling Machine – Power Milling Machines

As an Amazon Associate I earn from qualifying purchases.

1. Mophorn

#ad

Mophorn Power Feed Al-310S X-Axis Torque 450 in-lb Power Feed Milling Machine 200PRM Power Table Feed Mill Fits Bridgeport Acer 450 in-lb X-Axis Torque

#ad
Mophorn #ad - Safety feature to protect transmission gear and electronic components, as to meet the requirements of ergonomics. The two gears of this power table feed will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time.

Small volume and easy installation power feed, jog function operates at any feed speed; Excellent speed control in the entire range. Model: al-310s; type: x traverse; Voltage: 110V, 50/60Hz. Noiseless direction changes, better surface smoothness and power table feed won't vibrate or strain in low speed. Rotate speed: 0-200 rpm; max torque: 450 in-lb; Max feed rate: 650mm/min; Max return speed: 850mm/min.
BrandMophorn #ad
ManufacturerMophorn #ad
Part NumberPower Feed

2. MercuriusParts

#ad

Bridgeport mill part, MILLING MACHINE DIAL 100 GRADUATIONS 2060076 M1231 NEW!

#ad
MercuriusParts #ad - Dial with 100 graduations for the knee elevating crank. Machined cast iron - chrome plated FOR DURABILITY. Silver in color. Oem 2060076 3 1/4" od and 1 5/16" ID.
BrandMercuriusParts #ad
ManufacturerMercuriusParts #ad

3. WEN

#ad

WEN 33013 4.5A Variable Speed Single Phase Compact Benchtop Milling Machine with R8 Taper

#ad
WEN #ad - Bevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more. Includes an r8 spindle taper, onboard measurement indicators, an emergency stop button, two M10-1.

5 t-nuts, 12mm t-slots, a transparent chuck guard, a pre-installed drill chuck 1/32 to 1/2 inch, fine-tune adjustment hand wheels, a 13-inch swing, and a two-year warranty.118-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis. Compact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print. Variable speed goes anywhere from 100 to 1, 100 RPM on the low setting and 100 to 2, 500 RPM on the high setting.
BrandWEN #ad
ManufacturerWEN #ad
Height29.5 Inches
Length23.25 Inches
Weight130.1 Pounds
Width22 Inches
Part Number33013
Model33013

4. BestEquip

#ad

BestEquip Power Feed 450in-lb Milling Machine Power Feed 200Rpm Mill Power Feed X-Axis Torque Table Power Feed for Milling Machine with Adjustable Rotate Speed for Drilling & Milling Machine

#ad
BestEquip #ad - Quiet & rapid operation- with speed adjust knob, speed can be adjusted according to operator's requirement, ranging from 0-9. Durable & long lasting- safe design helps to protect transmission gear and electronic components; accessories of this power table feed will not mesh and wear at the same spot, maximizing durability and longevity.

Kept holding the switch until it travels to requires position. Jog switch should be at "FEED" position. Voltage: 220v. Power feed x-axis. Fit almost any horizontal knee type milling machine and other small machinery. Ergonomic design- power feed is equipped with safety feature to protect transmission gear and electronic components as to meet the requirements of ergonomics.

Dimension: 7 x 3. 5 x 12inches. Easy setup- small volume and easy installation, noiseless direction changes. For jog movement,  just switch to "0" position. X-axis power feed- made of aluminum material. Rotate speed: 200 rpm, Max Torque: 450in-lb.
BrandBestEquip #ad
ManufacturerBestEquip #ad

5. VEVOR

#ad

VEVOR 3 Axis Digital Readout DRO Display 450mm+500mm+1000mm Travel Length Precision Linear Scale 17.7+19.7+40 Inch for Mill Milling Machine

#ad
VEVOR #ad - 3 precision linear scales included. Complete set with a digital readout DRO display meter 3 axis with high precision. Also a calculator is equipped for more convenient usage. The digital readout display meter system is equipped with a variety of intelligent functions: SDM 200 sets memory, circumference drilling, bevel processing, 1/2 centering, power-off memory, oblique line drilling, etc.

Precision linear scale with digital readout, applicable for milling machine, movement control, video measuring machine, lathes, coordinate measurement, grinding machine, microscope, drilling machine, x-y-z working table monitor, position monitoring, profile projector, mechanical control as well as other area of linear scale and rotary encoder.

Lengths: 1x 450mm+1x 500mm+1x 1000mm 17. 7+19. 7+40 inch, 5 μm 00002" resolution at 20ºC. The linear scale dro kit is a necessary device for industries including mould manufacturing, machining and precision measuring instrument.
BrandVEVOR #ad
ManufacturerVEVOR #ad
Part NumberB07FPPRWXX

6. PENSON & CO.

#ad

PENSON & CO. 5/8" T-Slot Clamp Kit 58 pcs 1/2"-13 Stud Hold Down Clamping Set Upgraded for Bridgeport Mill

#ad
PENSON & CO. #ad - This machine clamping kit provides a variety of add-ons to fully utilize Central Machinery's two speed variable bench mill/drill machine. Clamp a wide range of workpieces securely to the table while machining, milling or drilling. Racks can be bolted to the wall or side of machine for easy access. Best among mini clamps press tool sets. Made of high grade steel and all the blocks, bolts, nuts and hold-downs are case hardened. Include a variety of flange nuts, step blocks, coupling nuts, tee nuts, studs and hold down bars to fit almost any machine clamping need.
BrandPENSON & CO. #ad
ManufacturerPENSON & CO. #ad
Part NumberFBA_CLCLP362658
ModelFBA_CLCLP362658