Top 10 Weld Fume Extractor – Fume & Smoke Extractors

As an Amazon Associate I earn from qualifying purchases.

1. Lincoln Electric

#ad

X-Tractor® Mini Portable Welding Fume Extractor with EN 20 Nozzle 120/1/60

#ad
Lincoln Electric #ad - Multiple extraction settings - cfm strength can be Selected Based On Environmental Conditions. Equipped with current sensor technology - Automatically Starts/Stops Extraction When Current Is Detected. Quiet operation - operates At A Sound Level Of
BrandLincoln Electric #ad
ManufacturerLincoln Electric #ad
Height29 Inches
Length16.8 Inches
Weight42.99 Pounds
Width15.6 Inches
Part NumberK3972-5
ModelK3972-5

2. KOTTO

#ad

3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter Updated, Electric Iron Welding, KOTTO Strong Suction Hose Fume Smoke Absorber for Soldering, Hose pre-attached

#ad
KOTTO #ad - The fan speed is adjustable. Suction: 40w, 6000 rpm, 52cfm, life expectancy: 50, 000 hours, Noise Level: 55dbm, Static pressure: 125mmH2O. Soldering smoke absorber, electric iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.

Adjustable optimized 6000 rpm high suction fan is low noise and allows you to remove fumes 5-6 inches away. Easy to replace the filter, power consumption: 120v-240v, 40w 12V, Includes one replacement filter. Us-based customer support, 30 days full satisfaction no question asked return period. Working temperature: -20℃~60℃, 4A Power supply. A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.
BrandKOTTO #ad
ManufacturerKOTTO #ad
Part NumberFAN_SLD

3. MaxxAir

#ad

MaxxAir HVHF 12COMBO Heavy Duty Cylinder Fan with 20-foot Vinyl Hose, Yellow, 12-Inch, High Velocity Portable Utility Blower/Exhaust Axial Hose Fan

#ad
MaxxAir #ad - High velocity extractor fan: it blows up to 2, 000 cfm and has a 2-speed 120v totally enclosed motor. It is perfect for crawl spaces, attics and basements. Portable exhaust fan: this 12-inch portable blower/exhaust axial hose fan with 20-foot hose is easy to move, easy to operate, and easy to pack up when you are done.

With a 1-year limited warranty from Texas based support you can buy worry free! Our duct and ducting is heavy grade material and perfect for professionals or residential areas alike. It is ul listed for outdoor use with GFCI outlet not included. It comes with a 20-foot heavy duty 2-ply polyvinyl flex hose with steel support coils, and a 6-foot power cord. It provides directional airflow to limited access areas. Heavy duty cylinder fan: this maxxair high-velocity axial hose fan is the ideal fan for limited access areas.

Everything is made for easy use with no corners cut. Blower fan with vinyl hose: it may be used for intake or exhaust, hanger rings and cinch-strap, depending on which end the hose is atttached. This hose fan works as an exhaust fan or blower fan, it truly is the ultimate utility fan. This a not a cheap fan you use once - this fan is built to last from quality parts and powerful enough for any job. It is made of heavy duty yellow coated steel.
BrandMaxxAir #ad
ManufacturerMaxxAir #ad
Height17 Inches
Length28 Inches
Weight1.02 Pounds
Width15 Inches
Part NumberHVHF 12COMBO
ModelHVHF12COMBO
Warranty1-year limited warranty

4. Fstop Labs

#ad

KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station

#ad
Fstop Labs #ad - Easy to replace filter, power consumption: 120v, includes one replacement filter. Working temperature: -20℃~60℃, 30W 50 / 60Hz. 4 non-slip heavy duty rubber feet anchors the unit to the ground.

Handy carrying handle allows you to move the unit easily. Solder smoke absorber/fume remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station. 04 inch thick activated carbon filter absorbs and captures fumes from solder, chemicals, flux, gases and helps to prevent dissipation into the room. Us based customer support, 30 days full satisfaction no question asked return period. Optimized 3000 rpm high suction fan is low noise and allows you to remove fumes 5-6 inches away.
BrandFstop Labs #ad
ManufacturerFstop Labs #ad
Part NumberWV-05SN-Z9HB
ModelYellow

5. BAOSHISHAN

#ad

110V, BAOSHISHAN Solder Fume Extractor 3 Stage Filters Strong Suction with Two Covers Smoke Absorber for DIY Soldering Welding Nail Salon Work Rubber Cover

#ad
BAOSHISHAN #ad - The upwind diversion design allows harmful particles and gases to contact the 3-stage filters more fully and evenly, making the filter element more efficient. We will solve problems for you within 24 hours. Won't take up space - our welding fume extractor's size is smaller than a4 paper.

99. 97% purification rate - baoshishan fume extractor can create a powerful 106 CFM airflow to exhaust and purify air. It has passed the environmental impact assessment test and certification, the purified air meets the hygienic standards. 3-stage filter - the 3d filters has 4 times the dust holding capacity of the old one. Truly no emissions. Each inner connecting section of the suction pipe has fine convex points, can be bent and fixed at any angle at will.

Also equipped with 4 quality universal wheels with buckles, convenient to move and fix at any station. Outstanding customer service - baoshishan provides 1 month returning for quality problems, 12-months warranty and online technical support. Please feel free to contact us with any questions "alismile2014" and the host is "hotmail". High purification rate allow you to breathe fresh air again. Our goal is to make you 100% satisfied.
BrandBAOSHISHAN #ad
ManufacturerBAOSHISHAN #ad
Part NumberFBA-ZQ-697A

6. Weller

#ad

Weller WSA350 120v Bench Top Smoke Absorber

#ad
Weller #ad - Great for workspaces using more active fluxes. Fumes are absorbed by the replaceable carbon-activated filter. Includes one replacement filter WSA350F, ESD safe. Removes flux fumes from soldering workbench. Fan is quiet and will not add significant noise to the workspace.
BrandWeller #ad
ManufacturerWELLER #ad
Height7.1 Inches
Length11.3 Inches
Weight2 Pounds
Width10.2 Inches
Part NumberWSA350
ModelWSA350

7. WEN

#ad

WEN 3410 3-Speed Remote-Controlled Air Filtration System 300/350/400 CFM, Basic w/ RF Remote 400 CFM

#ad
WEN #ad - Rf remote system allows for operation from any angle of the room, even if direct line of vision is obstructed. Includes a 1-micron filter and a 5-micron pre-filter, both of which can be easily replaced. Remote control allows users to set timer, change speed and power the unit on and off from up to 26 feet away. Programmable timer automatically shuts unit off after set number of minutes. Noise rating – 50 to 60 dB. Dimensions – 17” l x 205” w x 10” h | electrical requirements – 120v, 60 hz, 1a | air flow – 300/350/400 cubic feet per minute | Cover rooms up to – 400 sq ft.
BrandWEN #ad
ManufacturerGreat Lakes Tool MFG INC #ad
Height10 Inches
Length17 Inches
Weight31 Pounds
Width20.5 Inches
Part Number3410
Model3410
Warranty2 year

8. BAOSHISHAN

#ad

BAOSHISHAN Fume Extractor Soldering 3 Stage Filters Desktop Smoke Absorber Remover for DIY Soldering Work and Phone Repair

#ad
BAOSHISHAN #ad - You can bend the tube to just about any position for your projects, the base weighs enough that it won't fall over. We will solve problems for you within 24 hours. Size mini - the size of fume extractor is 185*185*85mm, small and convenient. Filter plus - solder smoke absorber has 3 stage filter.

If you have any questions, diY process, please contact us "alismile2014" and the host is "hotmail". It can support its own weight, can stay mid air without support. Application more - this fume extractor can be used in soldering, Smart phone maintenance, Computer maintenance, maintenance of electronic products, etc. Multiple filtration ensures your healthy. It can be used at anywhere and only takes up a little space. Purification max - the solder fume extractor can rapidly purify, quickly absorb smoke within 1 second by adjusting the absorption rate.

Tube telescopic - the welding smoke sucker tube can be stretched and deformed at will. Remember to keep the fume extractor close to you work to ensure the fume be absorbed completely. The first layer of high-density filter screen preliminarily filters PM50, the second layer of High Efficiency Particulate Air dust collection filter screen filters PM05, and the third layer of activated carbon dust removal filter screen absorbs harmful gases. High purification rate allow you to breathe fresh air again and protect your respiratory tract and lungs.
BrandBAOSHISHAN #ad
ManufacturerBAOSHISHAN #ad
Part NumberFBA-WLS-217

9. BAOSHISHAN

#ad

BAOSHISHAN Fume Extractor Soldering Solder 3 Stage Filters Smoke Absorber Desktop Smoke Sucker Remover Mini Size with Strong Suction for DIY Soldering Work

#ad
BAOSHISHAN #ad - High purification rate allow you to breathe fresh air again and protect your respiratory tract and lungs. The solder fume extractor can rapidly purify, quickly absorb smoke within 1 second. Install easy - the tube and fume extractor can be installed only by rotating counterclockwise according to the thread, which is 100% suitable.

It can support its own weight, can stay mid air without support. It will not get in the way of your work and avoid the clutter of the workbench. It can be used at anywhere and only takes up a little space. You can bend the tube to just about any position for your projects, the base weighs enough that it won't fall over. The first layer of high-density filter screen preliminarily filters PM50, the second layer of H-E-P-A dust collection filter screen filters PM05, and the third layer of activated carbon dust removal filter screen absorbs harmful gases.

Just open the metal lock to replace the filter separately and we will provide additional 4pcs pre-filters for free. Purification max - the baoshishan fume extractor creates a powerful air volume to exhaust and purify air. Multiple filtration ensures your safety. Tube telescopic - the smoke sucker tube can be stretched and deformed at will.
BrandBAOSHISHAN #ad
ManufacturerBAOSHISHAN #ad
Part NumberFBA-WLS-337

10. Kulannder

#ad

Solder Smoke Absorber Remover Fume Extractor Soldering Fan for DIY Working Soldering 3D Printing

#ad
Kulannder #ad - Easy to use: unique design for disassembly, activated carbon filter can easy to be replaced at any time. Applicable occasions: solder absorber is a special absorber for DIY, 3D printing, laboratory and work areas that will produce smoke.

Including one replacement filter. Anti-skid cotton design: the base of fume extractor fan is 1:1 large anti-skid cotton design, which can not only prevent the product from scratching the table, but also reduce the noise brought by the fan during work. Super strong suction: 60w super power smoke absorber with super suction, more than 50% of the performance of similar products in smoking distance, smoking range and purifying air area.

Absorb harmful smoke: the 04 inch thick activated carbon filter absorbs smoke from welding, 3D printing and a variety of workplaces, helping to purify the air quality in the area. When you remove the filter cotton, it can also be used as a working fan.
BrandKulannder #ad
ManufacturerKulannder #ad
Part NumberSmokerAbsorber04