Top 10 Vitamix Blade Assembly – Blender Replacement Parts

As an Amazon Associate I earn from qualifying purchases.

1. Vitamix

#ad

Vitamix Wet Blade Assembly

#ad
Vitamix #ad - Fits standard household 64 and 32 oz containers. Does not fit new household low-profile 64 container or 48 ounce container. Stainless-steel blades. Fits standard commercial 64, 48, and 32 oz containers. Does not fit commercial MP, XP, Advance or XL containers.
BrandVitamix #ad
ManufacturerVitamix #ad
Height3.7 Inches
Length3.54 Inches
Weight0.01 Pounds
Width5.04 Inches
Part Number1152
Model1152
WarrantyLifetime warranty

2. Frienda

#ad

3 Pieces Blender Blade Assembly 6 Blade Wet Dry Ice Blade Assembly With Socket Wrench Drive Socket Kit Replacement Parts for Vita-Mix Blender Compatible with Vita-Mix 1151 Vita-Mix 1152

#ad
Frienda #ad - Package content: 1 piece of blender blade assembly and 1 drive socket kit set, which includes 1 piece of socket and 1 piece of wrench, totally 3 pieces for you, a convenient combination for you to replace and install. Drive socket kit compatibility: this drive socket kit can be compatible with Vita-Mix 891 and 802, Drink Machine Two-Step, Vitamix Blending Station, Drink Machine Two-Speed, and BarBoss Advance blenders.

Ice blade compatibility: this blender blade assembly is for vita-mix 1002, vm0100a, 5012, total nutrition centers, drink machine models; it fits for standard household 64 and 32 oz containers and standard commercial 64, vita-prep, VM0100, 5057, VITA-MIX, 48, XP, 5006, BarBoss 5039, 1230, and 32 oz containers; Please note that it doesn’t fit for new household low-profile 64 or 48 ounce container and commercial MP, Advance or XL containers.

Time to replace it: if your blade of the blender turns slower than before, then you may consider to replace for a new socket kit, but the motor is in good status, it's recommended that you should check the condition of your socket drive every 3 or 4 months. Easy to install: first, install the new one by wrench included to accomplish installing, remove the rubber pad, then, take out the old socket kit, finally, just need 3 easy steps in a few minutes.
BrandFrienda #ad

3. Vitamix

#ad

Vitamix Wet Blade Assembly 2

#ad
Vitamix #ad - Make sure this fits by entering your model number. Fits standard commercial 64, 48, and 32 oz containers. Does not fit new household low-profile 64 container or 48 ounce container. Fits standard household 64 and 32 oz containers. Does not fit commercial MP, XP, Advance or XL containers.
BrandVitamix #ad

4. DRELD

#ad

Replacement Part Fit for Vitamix 5200 Series 64 48 32 oz, 6Knife Blender Repair Kit Blade, Removal Tool, Drive Socket

#ad
DRELD #ad - Premium quality: strict quality control standards to build and test. It is easy to put it in a glass container and has been designed to remove the cleaning screw off the nut. Does not fit any Stainless-Steel Jars. Product note: the new replacement will replace worn or damaged blades. Will solve the problem of water leakage in the mixer and save the cost of buying a new mixer.

Benefit to blender: better protect the mixer and seal it, keep the lid clean and watertight, replace the old seal and blade, make the food crumble more thoroughly. Made by premium quality food grade rubber, not easy to deformation, convenient to clean. This version is easier to clean up. It can be used for a long time. Perfect match and good Choice for Direct replacement of original parts, can replace juicer or blender original drive clutch. The change of blade size and angle had little effect on the stirring performance of mixed food, can replace juicer or blender original blade and slices a variety of fruits and vegetables effortlessly.

Application: a common replacement part, this seal sits between the top of the blade and the bottom of the jar. Compatible models: fits 48oz & 64oz vitamix & vita-mix Blenders Retainer Nut Does NOT fit low profile jars. The blender blade cutter and two gasket is a necessary blender accessory in case of emergency. Not genuine, easy installation, superior toughness, but the quality is better than the OEM.
BrandDRELD #ad
ManufacturerDRELD #ad
Height3.15 Inches
Length8.27 Inches
Width3.54 Inches
Part Number48oz & 64oz mix Blenders
Model48oz & 64oz mix Blenders

5. Vitamix

#ad

Vita-Mix 015990 Adv Blade Assembly

#ad
Vitamix #ad - Stainless steel is wider than other blades to improve blending. X 5-in. Oem approved for safety and reliability. Approved for use in 36019, quiet one 120v in-counter, quiet one 220-240v on-counter, quiet one 120v on-counter, quiet one 200-240V In-Counter, Quiet One 100V In-Counter, drink machine advance, blend station advance in-counter, blend station Advance On-Counter, Quiet One 100V On-Counter, BarBoss Advance, VM0145. Twin bearing, double sealed design for better blending and longer blade life. 5-in. X 9-in.
BrandVitamix #ad
ManufacturerPrtst #ad
Height9 Inches
Length5 Inches
Weight0.27 Pounds
Width5 Inches
Part Number015990
Model15990

6. DRELD

#ad

Removal Tool, Replacement Part Fit for Vitamix 5200 Series 64 48 32 oz, 4Knife Blender Repair Kit Blade, Drive Socket

#ad
DRELD #ad - It can be used for a long time. Will solve the problem of water leakage in the mixer and save the cost of buying a new mixer. Does not fit any Stainless-Steel Jars. Application: a common replacement part, this seal sits between the top of the blade and the bottom of the jar. The change of blade size and angle had little effect on the stirring performance of mixed food, can replace juicer or blender original blade and slices a variety of fruits and vegetables effortlessly.

Product note: the new replacement will replace worn or damaged blades. Not genuine, not easy to deformation, convenient to clean. Made by premium quality food grade rubber, superior toughness, easy installation, can replace juicer or blender original drive clutch. Perfect match and good choice for Direct replacement of original parts, but the quality is better than the OEM. Premium quality: strict quality control standards to build and test.

Compatible models: fits 48oz & 64oz vitamix & vita-mix Blenders Retainer Nut Does NOT fit low profile jars. It is easy to put it in a glass container and has been designed to remove the cleaning screw off the nut. Benefit to blender: better protect the mixer and seal it, keep the lid clean and watertight, replace the old seal and blade, make the food crumble more thoroughly. The blender blade cutter and two gasket is a necessary blender accessory in case of emergency. This version is easier to clean up.
BrandDRELD #ad
ManufacturerDRELD #ad
Part Number48oz & 64oz mix Blenders
Model48oz & 64oz mix Blenders

7. Vitamix

#ad

Vita-Mix 000836 Heavy Retainer Nut With O-Ring

#ad
Vitamix #ad - Intended only for designed and specified use. Genuine OEM replacement part. Approved by original equipment manufacturer OEM. Vita-mix has a full line of award winning professional blenders for commercial applications. Genuine oem provides safety, reliability, and optimal performance.
BrandVitamix #ad
ManufacturerVita-Mix #ad
Height4 Inches
Length7 Inches
Weight0.55 Pounds
Width5 Inches
Part Number836
Model000836

8. Vitamix

#ad

Vitamix Wet Blade Assembly Renewed

#ad
Vitamix #ad - Does not fit new household low-profile 64 container or 48 ounce container. Stainless-steel blades. Fits standard household 64 and 32 oz containers. Does not fit commercial MP, XP, Advance or XL containers. Fits standard commercial 64, 48, and 32 oz containers.
BrandVitamix #ad
ManufacturerVitamix #ad
Height2 Inches
Length3 Inches
Weight0.4 Pounds
Width3 Inches
Part Number1152-cr
Warranty90 days limited warranty

9. Vitamix

#ad

64oz, Vitamix 212-1003 756 64 oz Commercial NSF Container with Ice Blade and Lid, Black

#ad
Vitamix #ad - Authorized Vitamix Distributor. For use with touch & go 2 and Drink Machine blenders. High impact, polycarbonate, 64 ounce container. Bpa-free. Includes cutting blades and lid.
BrandVitamix #ad
ManufacturerVITA-MIX #ad
Height13.8 Inches
Length9.25 Inches
Weight2.85 Pounds
Width7.6 Inches
Part Number756
Model212-1003

10. Blendin

#ad

1152, Blendin Stainless Steel Heavy Duty Wet Dry Ice 6 Blades Assembly,Compatible with Vitamix Part 1151

#ad
Blendin #ad - It does not fit Stainless Steel Jars. Does not fit commercial MP, XP, Advance or XL containers. Sturdy and Strong for Blending Ice. 6 leaf Stainless steel. This blade will work with the vitamix blending Station, Drink Machine Two-Speed, Drink Machine Two-Step, and BarBoss Advance blenders to mix up all the ingredients. Does not fit new household low-profile 64 container or 48 ounce container.
BrandBlendin #ad
Height2.9 Inches
Length2.9 Inches
Width2.3 Inches
Part Number8541987789
Model8541987789