As an Amazon Associate I earn from qualifying purchases.

Straight cut, rip cut and more. 13" cutting width and 8mm cutting depth. Must repair the sharpness of the blade installed flooring on about 5000 sq.
5inch. Easy to use and to carry around. Design for cutting lvp, pvc, lvt, spc, wpc, vct, Vinyl Plank Flooring. Why does the floor you cut crack? because your floor must be rigid core vinyl Plank (SPC or RVP), it is a stone-plastic composite material, which contains stone powder; it is a brittle material. 2. 2mm thick tungsten steel sharp blade, included a 600 grit oilstone to keep sharp. When the blade becomes dull.


9 is a unique price on the market, and only about half of the blade is used for each cut. No electricity, no dust, quick, quiet and Easy to use.
4 mm thick tungsten steel sharp blade, included a 600 Grit hone stone to keep sharp. The general floor width is 8 inches, and it is a great value for money! When this side of the blade becomes dull, wobble-free and quiet cutting. This configuration, make sure you have a replacement blade. Blades are consumables. Installation kit with tapping Block, Pull Bar and Spacers With 20 Spacers.

Design for cutting lvp, pvc, spc, vct, lvt, wpc, Vinyl Plank Flooring.2. 2mm thick 9” length tungsten steel sharp blade, included a 600 grit oilstone to keep sharp. When the blade becomes dull. The blade of our LVP-230 cutters can be moved.
Be sure to buy one of the good things and try it, No electricity needed, No noise, Easy and Professional cutting vinyl floor.0-45° angle cutting, Angle cut, you will like it!. Clearly marked measuring guide. Must repair the sharpness of the blade did flooring on about 2000 square feet, Otherwise it will quickly end the service life,this is a man-made damage and is not covered by the warranty! Or replace blade. Straight cut, notch cut, cutting max.



Cuts a variety of material, fiber cement board HardiePlank, including laminate flooring, cemplank, engineered wood and vinyl siding up to 13” wide and 19/32” thick.28-1/2" handle for increased leverage.


No dust, quick, no noise, no go up and down staires, no go out and In House, Easy and Professional cutting vinyl floor, No electricity needed, Time and Labor Saver.
1. Marshalltown
#ad
Engineered Hardwood, Made in the USA, Laminate, Cuts Vinyl Plank, and More, Honing Stone Included, MARSHALLTOWN Ultra-Lite Flooring Cutter 13", Siding
#adMarshalltown #ad - Moveable fence for 45 degrees - up to 8 Inches - and 90 Degree cuts. This product is made in the USA with Global Materials. Cuts flooring up to 13 inches wide. Robust metal jacketed bearings for enhanced durability.More information #ad
Quiet, dust-free operation for use inside. Cuts laminate and vinyl up to 12 mm thick or cuts engineered wood - up to 10 mm thick and 1200 Janka. New improved design is Lightweight and portable.Brand | Marshalltown #ad |
Manufacturer | Marshalltown Company #ad |
Height | 3 Inches |
Length | 15.25 Inches |
Weight | 15.96 Pounds |
Width | 24.25 Inches |
Part Number | LWFS13 |
Model | LWFS13 |
More information #ad
2. MANTISTOL
#ad
WPC and Rigid Core Vinyl Plank; Best buy!, SPC, LVP, PVC, MantisTol 13" Pro Vinyl Floor Cutter LVT-330 for VCT,LVT
#adMANTISTOL #ad - No dust, please remove the blade, easy and professional cutting vinyl floor, No electricity needed, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar.Straight cut, rip cut and more. 13" cutting width and 8mm cutting depth. Must repair the sharpness of the blade installed flooring on about 5000 sq.
More information #ad
Ft otherwise it will quickly end the service life,man-made damage is not covered by the warranty. The blade of our lvt-330 cutters can be moved. 0-45° angle cutting, translational cutting, Angle cut; " L & 凵" cut, the deep of the throat is 115mm/4.55inch. Easy to use and to carry around. Design for cutting lvp, pvc, lvt, spc, wpc, vct, Vinyl Plank Flooring. Why does the floor you cut crack? because your floor must be rigid core vinyl Plank (SPC or RVP), it is a stone-plastic composite material, which contains stone powder; it is a brittle material. 2. 2mm thick tungsten steel sharp blade, included a 600 grit oilstone to keep sharp. When the blade becomes dull.
Brand | MANTISTOL #ad |
Manufacturer | CutTool Ltd. #ad |
Height | 14.6 Inches |
Length | 23.6 Inches |
Weight | 14 Pounds |
Width | 15.5 Inches |
Part Number | LVT |
More information #ad
3. Norske
#ad
Norske Tools Newly Improved NMAP001 13 inch Laminate Flooring and Siding Cutter with Heavy Duty Fixed Aluminum Fence and Built-in Precision Angled Miter Settings
#adNorske #ad - Sturdy high-quality Steel And Aluminum Construction. Compact and easy to use; produces Clean, Precision Cuts With No Splintering And Smooth Finish.More information #ad
Product Type : Tools. Cuts a variety of material, fiber cement board hardieplank, Including Laminate Flooring, cemplank, Engineered Wood And Vinyl Siding Up To 13” Wide And 19/32” Thick.Brand | Norske #ad |
Manufacturer | Norske Tools Ltd #ad |
Height | 14 Inches |
Length | 25 Inches |
Weight | 13 Pounds |
Width | 18 Inches |
Part Number | NMAP001 |
Model | NMAP001 |
More information #ad
4. MANTISTOL
#ad
WPC and all Vinyl based flooring; Cuts up to 16mm 5/8" thick and 13" wide; Best Buy !, SPC, LVT, Laminate, MANTISTOL MC-330 13'' Pro Laminate Floor Cutter with Installation Kit For Multi-Floor
#adMANTISTOL #ad - Item weight 18. 7 lbs, diy for household and business, Strong and Durable, Preferred for business!. 37-1/4" handle for increased leverage with less effort. If you use it for business purposes, the floor can be moved to the other side of the workbench and work with the other half of the sharp blade, a complete double supported worktable provides smooth, $159.9 is a unique price on the market, and only about half of the blade is used for each cut. No electricity, no dust, quick, quiet and Easy to use.
More information #ad
Sturdy high-quality steel and heavy duty aluminum construction. For laminate, parquet, fiber-cement siding, multi-floor, spc, rubber cove base, wpc, lvt, LVP, solid wood, Deck-Floor-Boards, vct, bamboo flooring, Vinyl Flooring and more, up to 13” wide and 16mm 5/8” thick.44 mm thick tungsten steel sharp blade, included a 600 Grit hone stone to keep sharp. The general floor width is 8 inches, and it is a great value for money! When this side of the blade becomes dull, wobble-free and quiet cutting. This configuration, make sure you have a replacement blade. Blades are consumables. Installation kit with tapping Block, Pull Bar and Spacers With 20 Spacers.
Brand | MANTISTOL #ad |
Manufacturer | CutTool Ltd. #ad |
Height | 3.15 Inches |
Length | 23.39 Inches |
Weight | 18.74 Pounds |
Width | 12.36 Inches |
Part Number | MC-330 |
Model | MC-330 |
More information #ad
5. MANTISTOL
#ad
PVC, VCT, WPC, Rigid Core Vinyl Plank; Best buy!, MantisTol LVP-231 8.9" Vinyl Plank Cutter for LVT, LVP
#adMANTISTOL #ad - There are many complex scenes on the construction site that need special cutting irregular corners,most of which are columns, not to mention the beautiful price, which will save you a lot of time to accompany your family!. No dust, door edges and wall corners.Design for cutting lvp, pvc, spc, vct, lvt, wpc, Vinyl Plank Flooring.2. 2mm thick 9” length tungsten steel sharp blade, included a 600 grit oilstone to keep sharp. When the blade becomes dull. The blade of our LVP-230 cutters can be moved.
More information #ad
If you received the cutter that cuts less than 8mm thick, clean the aluminum shavings in the groove, please remove the blade, and then assemble the blade correctly in the center of the blade bar. Cutting unapproved materials will void warranty. Be sure to buy one of the good things and try it, No electricity needed, No noise, Easy and Professional cutting vinyl floor.0-45° angle cutting, Angle cut, you will like it!. Clearly marked measuring guide. Must repair the sharpness of the blade did flooring on about 2000 square feet, Otherwise it will quickly end the service life,this is a man-made damage and is not covered by the warranty! Or replace blade. Straight cut, notch cut, cutting max.
Brand | MANTISTOL #ad |
Manufacturer | CutTool Ltd. #ad |
Height | 6.1 Inches |
Length | 21.6 Inches |
Weight | 12.9 Pounds |
Width | 11.3 Inches |
Part Number | LVP |
More information #ad
6. ROBERTS
#ad
ROBERTS 10-895 Vinyl Tile Cutter, Red
#adROBERTS #ad - Molded handle for extra grip and comfort. It can cut straight up to 12 in. Vinyl Tile. Not for Vinyl plank. Convenient carry handle for easy transport. Built in ruler to use as cutting guide.More information #ad
It can cut diagonal up to 8 in. Hardend steel blades for accurate cuts. Vinyl Tile. Locking blade and convenient handle makes transport easy. Designed to cut Vinyl Tiles up to 4mm thick.Brand | ROBERTS #ad |
Manufacturer | Roberts #ad |
Height | 3 Inches |
Length | 16.8 Inches |
Weight | 3.42 Pounds |
Width | 8 Inches |
Part Number | 10-895 |
Model | 10-895 |
More information #ad
7. ROBERTS
#ad
ROBERTS 10-35 Laminate and Vinyl Plank Cutter, Red, 8"
#adROBERTS #ad - Positionable-InchV-Inch support keeps planks level while cutting. Cutter is not applicable for cutting laminate with attached padding. Heavy duty steel frame for maximum stability. Advantages: no dust, the blunt blade prevents splitting of laminate boards like most cutters.More information #ad
It is a blunt blade design that "rips" through the flooring material. Cuts laminate up to 8-Inch wide and 10mm thick. Designed for cutting end pieces to be covered with base molding. This product is meant to cut with leverage and not a sharp blade.Brand | ROBERTS #ad |
Manufacturer | QEP #ad |
Height | 5.8 Inches |
Length | 10.2 Inches |
Weight | 12 Pounds |
Width | 27.6 Inches |
Part Number | 10-35 |
Model | 10-35 |
Warranty | Will replace if product contains manufacturing defects. Contact Customer Service at 1-866-435-8665. |
More information #ad
8. Norske Tools
#ad
Norske Tools NMAP004 13 inch Laminate Flooring & Siding Cutter with Sliding Extension Table with Bonus Floor Installation Kit Great Value
#adNorske Tools #ad - Adjustable measuring gauge for quick repetitive cut. Bonus accessory kit includes pull bar, tapping block, 16 PVC inserts and mallet $30 value.Cuts a variety of material, fiber cement board HardiePlank, including laminate flooring, cemplank, engineered wood and vinyl siding up to 13” wide and 19/32” thick.28-1/2" handle for increased leverage.
More information #ad
Includes 13” high speed steel blade. Heavy duty 22” aluminum fence and reinforced table top for added strength and durability. 13" cutting capacity. Laser etched table miter gauge for angled cuts. Sliding extension table supports longer boards 41" Working length. Quiet and dust free! .Brand | Norske Tools #ad |
Manufacturer | Norske Tools #ad |
Height | 3.5 Inches |
Length | 29 Inches |
Width | 15 Inches |
Part Number | NMAP004 |
Model | NMAP004 |
Warranty | No Guarantee |
More information #ad
9. EAB Tool
#ad
EAB Tool Exchange-a-Blade 2100005 9-Inch Laminate Flooring Cutter
#adEAB Tool #ad - Will also cut fiber cement siding such as hardier plank. Angle gauge allows for cuts up to 45 degrees. Country of origin : China. Bonus installation kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm 5/8".More information #ad
Will also cut vinyl tile and fiber cement siding such as hardy plank. Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm 5/8".Brand | EAB Tool #ad |
Manufacturer | Exchange A Blade #ad |
Height | 3.5 Inches |
Length | 21 Inches |
Weight | 12 Pounds |
Width | 10 Inches |
Part Number | 2100005 |
Model | 2100005 |
Warranty | 100% satisfaction guarantee |
More information #ad
10. CUTTEREX
#ad
WPC, Rubber Floor and Rigid Core Vinyl Plank, LVT, SPC, LVP, PVC, CUTTEREX 13" Free 360° Vinyl Laminate Floor Cutter for VCT
#adCUTTEREX #ad - Outstanding value: dust free, quiet and easy operation. Sturdy steel and aluminum construction: Plus Stop Fence and Angle Cutting Gauge. Cutting any unapproved Flooring Materials will be Out of Warranty.No dust, quick, no noise, no go up and down staires, no go out and In House, Easy and Professional cutting vinyl floor, No electricity needed, Time and Labor Saver.
More information #ad
Compact design and light weight: Easy to Carry and Move around. Cuts mmost shapes on floor: cuts at free 360° angles, Straight Cut, "L" Cut, "П" Cut and Lengthwise Cut. Cuts wide range of floors: cuts up to 13" wide on vct, lvp, max. 6mm cutting thickness, lvt, wpc, vinyl Plank Flooring, PVC, Adjustable Cutting Blade Height saves operator strength.Brand | CUTTEREX #ad |
Manufacturer | CUTTEREX #ad |
More information #ad