Top 10 Upcut Router Bit – Spiral Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. Whiteside Router Bits

#ad

Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

#adWhiteside Router Bits #ad - Industrial Quality. Whiteside router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM.

Brand	Whiteside Router Bits #ad
Manufacturer	Whiteside #ad
Height	5.5 Inches
Length	2 Inches
Weight	0.06 Pounds
Width	3 Inches
Part Number	RU2100
Model	RU2100

2. SpeTool

#ad

SpeTool Upcut Spiral Router Bits Extra Long 4 inch with 1/2 Inch Shank, 1/2 Cutting Diameter Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving

#adSpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet. Industrial quality control to ensure best performance. Solid carbide up cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length. The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly upcut groove and slots, Cycles and dados with clean edge and bottom, Mortises, better than straight bits.

Brand	SpeTool #ad
Manufacturer	SpeTool #ad
Part Number	SPLD1/4-1/4-U

3. Freud

#ad

Freud 3/8" Dia. Solid Carbide Up Spiral Bit with 1/2" Shank 75-106,Silver

#adFreud #ad - Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Overall dia. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. D 3/8", cutting length h 1-1/4", 2 Flutes, 1/2" Shank.

Brand	Freud #ad
Manufacturer	Freud #ad
Height	1 Inches
Length	1 Inches
Weight	0.14 Pounds
Width	1 Inches
Part Number	75-106
Model	75-106

4. SpeTool

#ad

Carving, SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, 1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut

#adSpeTool #ad - Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits. The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Industrial quality control to ensure best performance. Solid carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length.

Brand	SpeTool #ad
Manufacturer	SpeTool #ad
Part Number	SP-3/8-1/2-U

5. SpeTool

#ad

1/2 Inch Cutting Diameter HRC55 Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving Engraving Tools, SpeTool Upcut Spiral CNC Router Bits with 1/2 Inch Shank

#adSpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet. The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp. Industrial quality control to ensure best performance. Solid carbide up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length. Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits.

Brand	SpeTool #ad
Manufacturer	SpeTool #ad
Part Number	SP-D1/2-1/2-U

6. Whiteside Router Bits

#ad

Whiteside Router Bits RU5200T Three Flute with Spiral Bit, Up Cut Solid Carbide 1/2-Inch Cutting Diameter and 2-Inch Cutting Length

#adWhiteside Router Bits #ad - Precision ground for proper balance at high RPM. Industrial Quality. Whiteside router Bits are made with Premium Carbide.

Brand	Whiteside Router Bits #ad
Manufacturer	Whiteside #ad
Height	6 Inches
Length	3 Inches
Weight	1 Pounds
Width	4.5 Inches
Part Number	RU5200T
Model	RU5200T

7. SpeTool

#ad

Carving, SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut

#adSpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits. The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp. Industrial quality control to ensure best performance.

Brand	SpeTool #ad
Manufacturer	SpeTool #ad
Part Number	SPD1/4-1/4-U

8. Whiteside Router Bits

#ad

Whiteside Router Bits RU4700 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

#adWhiteside Router Bits #ad - Industrial Quality. Precision ground for proper balance at high RPM. Whiteside router Bits are made with Premium Carbide.

Brand	Whiteside Router Bits #ad
Manufacturer	Whiteside #ad
Height	5.5 Inches
Length	2 Inches
Width	3 Inches
Part Number	RU4700
Model	RU4700

9. Freud-Diablo

#ad

Freud 5 Piece Up Spiral Bit Set 90-150

#adFreud-Diablo #ad - Set comes in freud’s unique shadow box case that can hang on the wall or mount on the bench to keep bits handy and safe. Use on cnc and other automatic routers as well as hand-held and tablemounted portable routers. Cuts all composition materials, hardwoods, plywoods, and softwoods.

Brand	Freud-Diablo #ad
Manufacturer	Freud #ad
Height	1 Inches
Length	1 Inches
Width	1 Inches
Part Number	90-150
Model	90-150

10. HQMaster

#ad

HQMaster CNC Router Bits 3.175 Router Bit 1 8 End Mill Flat Nose Carbide Endmill Two Flute Spiral Upcut Milling Cutter Tool Set for Wood PVC MDF Hardwood 10Pcs

#adHQMaster #ad - Package contents: 10pcs solid carbide spiral upcut bits assorted in storage case. Range of processing: for carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, plywood, wood, density board, acrylic, 3D relief sculpturing, ABS, surface machining, plastics, PVC, nylon, resin, hardwood etc.

Ideal for three-dimensional sculpture, etc. Dimensions: 1/8" 3. 175mm. Cutting edge diameter, 1/8" 3. 175mm. Perfect cutting: the design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal. It is smokeless and burr-free while processing. Cutting edge length/flute length, 17mm. High efficiency: these bits own sharp edge which is able for fast engraving that makes high efficiency, durable, high precision and not easy to break. Overall length, 38. 5mm.

Brand	HQMaster #ad
Manufacturer	HQMaster #ad
Part Number	HQ-6979