As an Amazon Associate I earn from qualifying purchases.
2 inch360 mm. We offer 1 year 100% satisfactory warranty, please kindly contact us for exchange, if unfortunately our soft down lid gaS STRUT did not work well, refund or return.

Perfect for any lids or flaps when soft close lid support is required. Similar purpose of a gas strut but doesn't self lift, stays and supports lid where you want it. Durable material — heavy lid hinge, max weight support 50lbs/2pcs.
Conditioned soft closing — only with this chest hinges supporting less than 50lbs and keeping two lid support hinges soft close in same tension by your adjustment will soft closing function work perfectly!! The safety hinges will go down slowly, and prevent fingers from getting smashed. No need to use the diagram on the package!. After installing the lid hinges for wooden box, please tighten the mechanism into Allen wrench hole in the middle of the arms to set up appropriate pressure, prevent lid from slamming shut. It can fit for most lids and allow you to keep your lids stay at any angle.

Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Installing screws and Allen wrench in package. Durable lid support hinge--made of zinc ally in satin Nickel, Lid support can be mounted for flap support or bar counter function.

Small compact design - the compact design allows for installation in tight fit areas. Easy install instructions - easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side.

Sturdy lid stay with soft close excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers.
Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers. Keep lid hinge stay opening & wide usage updated manual can be downloaded in amazon page. Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.

Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers. The hinge will not applicable with the lid at width more than 27’’ and height over 18’’. Lid stay slow closing -lid stay support built-in hydraulic dampening device.
Easy to install lid support-- updated install instructions can be downloaded in Amazon page. This lid support will hold the lid open until you are ready to close. Keep lid hinge stay opening, vertical cabinet doors and storage box, such as toy boxes and vanity lids, WIDE USAGE -- Never worry again about having to prop the lid open. This lid stay is deal for upward opening flaps, cabinetry.

Note: one hinge for left-hand mounting, and the other one for right-hand mounting. The lid stay will close lid softly while holding up with sturdy support, and prevent slammed doors and smashed little fingers.
Lock lid open securely: hold your lid open at max 90 degrees until you are ready to push it shut. Easy to lift and lower the top of storage chest, window seat bench, piano bench and more trunk. Never worry about having to prop the lid open. For lid height of over 25in, handle lid weight from 13lbs to 17lbs per hinge, each hinge supports 7-9lbs and both hinges do 14-18lbs.

Soft close: it allows heavy wooden box lids to close slowly to avoid hurting your fingers. No noise to distract you. If your lid does not meet the specified size and weight requirements, the hinge will not work.

Upward door open adjustable angle of 75°, 110°. Adjust by yourself, fit for most lids and allow you to keep your lids stay at any angle to your needs! Adjustable tensionadjust tension with allen wrench to fit for lids with different weight.
Conditioned soft closingonly with this chest hinges supporting less than 50lbs and keeping two soft close lid supports in same tension by your adjustment will soft closing function work perfectly. It will go down slowly, and prevent fingers from getting smashed. Keep lid openthe lid support hinge will hold the lid open until you want to close. Never worry about having to support lid by hand anymore. It's widely usage for box or chamber, chest, closet, window seat, such as toy box, cupboard, and wardrobe lids!.

Soft close safety hinge -- excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. 2 hinges support 25-50lbs.
Easy to install only 5 minute–each lid hinge can be used for right or left hand mounting, easy to install by following the placement measurements of the instructions. Keep the lid stay in place at different angles when the opening angle is larger than 90°. Corrosion resistance and anti-rust durable and practical.
1. Apexstone
#ad
Apexstone Soft Close Toy Box Hinges Soft Close Toy Chest Hinges Slow Closing Hinges for Toy Chest Toy Box Safety Hinge Soft Close Hinge, Set of 2
#adApexstone #ad - Lids lower gently, ideal for soft cLOSING lid to prevent from slamming so that it won't smash kid's fingers. Length center-to-center: 8. 7 inch220 mm, extended Length Center-to-Center:14.2 inch360 mm. We offer 1 year 100% satisfactory warranty, please kindly contact us for exchange, if unfortunately our soft down lid gaS STRUT did not work well, refund or return.
More information #ad
Soft down the door/lid which the side length is less than 30 Inch, the WEIGHT is Less than 33 Lbs. How to install&adjust it:just install it as the image shown in the description or the instructions in the package, While if you still have problem, please kindly Click "Ask Seller" Besides Your Order for In-time Assistance.Brand | Apexstone #ad |
Manufacturer | Apexstonetek/Apexstone #ad |
Part Number | GS5959 |
More information #ad
2. APFFSY
#ad
Lid Support Hinges Heavy Duty,Soft Close Hinges for Chest Toy Box,Lid Stay Support 50lb/2pcs APFFSY, Toy Box Hinges Soft Close
#adAPFFSY #ad - Adjustable tension — adjust the toy box hinges soft close tension with allen wrench to fit for lids with different weight. Just mark two drilling holes, 90°, also used for side-mounting and top-mounting. Keep lid stay open — the lid support hinge holds the lid open until you want to close. It's widely usage as hinges for wooden box, such as toy box hinges, chest hinges, also fit for overhead kitchen cupboard, wardrobe lids too.Perfect for any lids or flaps when soft close lid support is required. Similar purpose of a gas strut but doesn't self lift, stays and supports lid where you want it. Durable material — heavy lid hinge, max weight support 50lbs/2pcs.
More information #ad
The up-grated version has the advantages of strong bearing capacity, metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the chest slow close hinges guarantee high performance. Upward door open adjustable angle of 75°, and screw each mounting bracket. Conditioned soft closing — only with this chest hinges supporting less than 50lbs and keeping two lid support hinges soft close in same tension by your adjustment will soft closing function work perfectly!! The safety hinges will go down slowly, and prevent fingers from getting smashed. No need to use the diagram on the package!. After installing the lid hinges for wooden box, please tighten the mechanism into Allen wrench hole in the middle of the arms to set up appropriate pressure, prevent lid from slamming shut. It can fit for most lids and allow you to keep your lids stay at any angle.
Brand | APFFSY #ad |
Manufacturer | APFFSY #ad |
Height | 0.65 Inches |
Length | 5.2 Inches |
Width | 1.8 Inches |
More information #ad
3. Ryf
#ad
RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs
#adRyf #ad - Wide application--perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe. Easy to install lid support --the lid hinge is used for side mounting and top mounting.Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Installing screws and Allen wrench in package. Durable lid support hinge--made of zinc ally in satin Nickel, Lid support can be mounted for flap support or bar counter function.
More information #ad
Max weight lid hinge--support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side. Soft close lid stay-every lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting.Brand | Ryf #ad |
Manufacturer | Ryf #ad |
Height | 0.15 Inches |
Length | 8 Inches |
Width | 1 Inches |
More information #ad
4. SafeStay
#ad
Easy to Install, Lid Support for Toy Box and Chest, SafeStay Lid Stay 105 Degree Open with Soft Close
#adSafeStay #ad - Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers. This lid stay will hold the lid open until you are ready to close.Small compact design - the compact design allows for installation in tight fit areas. Easy install instructions - easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side.
More information #ad
100% money-back guarantee - if for whatever reason you are unhappy with the product we will refund you, no questions asked! Holds lid open - never worry again about having to prop the lid open. The lid stay allows the lid to open at a maximum 105 degree angle.Brand | SafeStay #ad |
Manufacturer | SafeStay #ad |
Height | 0.5 Inches |
Length | 4.5 Inches |
Width | 3.1 Inches |
More information #ad
5. MORINBO
#ad
Morinbo Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install Pack of 1
#adMORINBO #ad - Lid stay slow closing lid stay support built-in hydraulic dampening device. Compact design of lid stay hinge the compact design allows for installation in tight fit areas. And per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch.Sturdy lid stay with soft close excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers.
More information #ad
The lid hinges supports opening the lid at a maximum Angle of 105 degree. Easy to install comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allows you to easily complete the hinge installation. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers. Keep lid hinge stay opening & wide usage updated manual can be downloaded in amazon page. Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.
Brand | MORINBO #ad |
Manufacturer | MORINBO #ad |
Height | 0.6 Inches |
Length | 8.6 Inches |
Width | 2.1 Inches |
Model | MODP-145 |
More information #ad
6. RUYUFE
#ad
Lid Support for Toy Box and Upward Top-Opening Flap Doors Pack of 2, Lid Stay 105 Degree Open with Soft Close
#adRUYUFE #ad - Compact design of lid stay hinge -- the compact design allows for installation in tight fit areas. Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers. The hinge will not applicable with the lid at width more than 27’’ and height over 18’’. Lid stay slow closing -lid stay support built-in hydraulic dampening device.
More information #ad
The lid hinges supports opening the lid at a maximum Angle of 105 degree. Lid stay with soft close for toy box-- the lid stay is made of nickel plated steel and plastic, and 2 pcs lid-stay support the range of door weight 12-21 lbs, Height 18-19 inch. Easy to install lid support-- updated install instructions can be downloaded in Amazon page. This lid support will hold the lid open until you are ready to close. Keep lid hinge stay opening, vertical cabinet doors and storage box, such as toy boxes and vanity lids, WIDE USAGE -- Never worry again about having to prop the lid open. This lid stay is deal for upward opening flaps, cabinetry.
Brand | RUYUFE #ad |
Manufacturer | RUYUFE #ad |
More information #ad
7. Ravaver
#ad
Sold in Pairs Black, Ravaver Toy Box Hinges Soft Close, 26LBS-34LBS Heavy Duty Lid Stays 90 Degrees Open with Easy-to-Install Card
#adRavaver #ad - Gentle closing: all-new hydraulic slow-down mechanism for improved stability and safety. Before purchasing: do not support the lid at width over 45in and height over 28in. Strong support: for lid height of over 18in, while 2 hinges double weight support from 26lbs to 34lbs.Note: one hinge for left-hand mounting, and the other one for right-hand mounting. The lid stay will close lid softly while holding up with sturdy support, and prevent slammed doors and smashed little fingers.
More information #ad
Only takes 5 minutes to get installed by following the placement measurement card. Lock lid open securely: hold your lid open at max 90 degrees until you are ready to push it shut. Easy to lift and lower the top of storage chest, window seat bench, piano bench and more trunk. Never worry about having to prop the lid open. For lid height of over 25in, handle lid weight from 13lbs to 17lbs per hinge, each hinge supports 7-9lbs and both hinges do 14-18lbs.
Brand | Ravaver #ad |
Manufacturer | Ravaver #ad |
More information #ad
8. Dolenor
#ad
Toy Box Hinges Soft Close,Slow Closing lid Support Hinge,200N Gas Struts for Heavy Wooden Boxes2 Pack 200N/30LB
#adDolenor #ad - Note: does not fit lids over 50 inches wide and 25 inches high. Good opening lift: soft closing hinge helps to open heavy duty lids easily.Soft close: it allows heavy wooden box lids to close slowly to avoid hurting your fingers. No noise to distract you. If your lid does not meet the specified size and weight requirements, the hinge will not work.
More information #ad
And must have a 9-inch clearance. Easy to install: the lid holder is designed to support the lid of boxes, blanket boxes, such as toy boxes, heavy duty bench covers, and the hinge will slowly lower without slamming shut. Strong enough: strong lid support, 200N 2 pieces heavy duty gas struts can support lids up to 60 lbs.Brand | Dolenor #ad |
Manufacturer | Dolenor #ad |
More information #ad
9. APFFSY
#ad
Max Weight Support 50lb/2pcs, Toy Box Hinges Soft Close,APFFSY Lid Support Hinges,Lid Stay for Chest Wardrobe Closet Cupboard Wooden Box
#adAPFFSY #ad - Durable material max weight support 50lbs/2pcs. This up-grated version has the advantages of strong bearing capacity, metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance! Easy to install our soft close hinges can be mounted on the left or right side, 90°, also used for side-mounting and top-mounting.Upward door open adjustable angle of 75°, 110°. Adjust by yourself, fit for most lids and allow you to keep your lids stay at any angle to your needs! Adjustable tensionadjust tension with allen wrench to fit for lids with different weight.
More information #ad
After installing the folding lid stay hinge, please tighten the mechanism into Allen wrench hole in the middle of the arms to set up appropriate pressure, prevent lid from slamming shut!. Conditioned soft closingonly with this chest hinges supporting less than 50lbs and keeping two soft close lid supports in same tension by your adjustment will soft closing function work perfectly. It will go down slowly, and prevent fingers from getting smashed. Keep lid openthe lid support hinge will hold the lid open until you want to close. Never worry about having to support lid by hand anymore. It's widely usage for box or chamber, chest, closet, window seat, such as toy box, cupboard, and wardrobe lids!.
Brand | APFFSY #ad |
Manufacturer | APFFSY #ad |
Height | 0.65 Inches |
Length | 5.2 Inches |
Width | 1.8 Inches |
More information #ad
10. RUYUFE
#ad
Lid Stay Hinge Soft Close Safety Lid Support Toy Box Hinge 25-50lb for Toy Box Kitchen Cabinet Wardrobe of Top-Upward Opening & Top Flap Doors
#adRUYUFE #ad - Lid stay hinge rotate one way to lock lid open- soft close hinges will keep your lid open until you push hinge down. Lid will slow the descent when the opening angle is less than 70°. Weight capacity– 25-50lb lid support hold 12lbs-22lbs/1pc.Soft close safety hinge -- excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. 2 hinges support 25-50lbs.
More information #ad
Durable heavy duty hinge--lid support hinge is made of zinc alloy, multi-layer electroplating solid process casting, fine workmanship. Lid support hinge is suitable for doors of cabinet, wardrobe, kitchen, toy box, storage chest cupboard and so on. Easy to install only 5 minute–each lid hinge can be used for right or left hand mounting, easy to install by following the placement measurements of the instructions. Keep the lid stay in place at different angles when the opening angle is larger than 90°. Corrosion resistance and anti-rust durable and practical.
Brand | RUYUFE #ad |
Manufacturer | RUYUFE #ad |
More information #ad