Top 10 SmartThings Motion Sensor – Motion Detectors

As an Amazon Associate I earn from qualifying purchases.



ZOOZ Z-Wave Plus 4-in-1 Sensor ZSE40 VER. 2.0 Motion/Light/Temperature/Humidity

ZOOZ #ad - 4 smart sensors in 1: this compact device detects and reports motion, temperature, and light level to your smart home app. Security first: this sensor is equipped with bank-grade AES signal encryption. It's z-wave plus certified to ensure it complies with the highest industry standards.

Customize it: choose from 7 levels of motion sensitivity, adjust the motion re-trigger interval, and pick from 4 different LED indicator modes your hub needs to support advanced parameter input. It will work great with open systems like almond securify, hubitat, adt Pulse, HomeSeer, Qolsys, SmartThings Hub with custom device handler contact seller for instructions, VeraEdge, Vivint, VeraLite running under UI7, Home Assistant, and VeraPlus.

Will it work with my hub? this sensor is not supported by wink, or other z-wave alarm panels. New improved version: the included cr123A battery makes the sensor lasts much longer than the previous version. Compatible z-Wave hub required, humidity, sold separately. Updated motion detection allows you to get even quicker activity reports.
BrandZOOZ #ad
ManufacturerZOOZ #ad
Weight0.02 Pounds
Part NumberZSE40



Works with Vera and SmartThings, Zooz Z-Wave Plus S2 Motion Sensor ZSE18 with Magnetic Mount

ZOOZ #ad - Z-wave plus chip for longer range and increased battery life. Not supported by wink, Vivint, ADT, or Alarm. Com. Built-in z-wave range test tool for easier network troubleshooting. Great solution for light automation and security monitoring.

Acts as signal extender when connected to USB. Custom handler needed for SmartThings contact seller for details. Fast detection: reports motion to your z-wave smart home system reliably. 2 power sources: runs on a single battery for up to a year depending on traffic and settings OR on micro USB cable NOT INCLUDED. Extra features: adjustable motion sensitivity and retrigger time.

Flexible design: extremely small and light, the sensor sits in a perfectly shaped magnetic mounting base for precise and firm positioning. Vibration reports on SmartThings and other selected gateways. Z-wave hub required, sold separately. Certified secure: uses the latest s2 z-wave protocol and AES-128 signal encryption.
BrandZOOZ #ad
ManufacturerZOOZ #ad
Part NumberZSE18



Battery Powered, Aeotec TriSensor, Z-Wave Plus S2 Enabled Zwave Motion Sensor, Temperature, Light Sensor, Work with Zwave Hub Smartthings 3-in 1 Security System

AEOTEC #ad - Adjustable calibration. Compatible with certified z-wave gateways including: Samsung SmartThings, Zipabox, Vera, Domoticz, Homeseer HS3, Open Z-Wave, Isy994i ZW universal controller and more.

Motion sensor accurate to 23 feet, Temperature, 0~30000 LUX with ±3% accracy. Craft your own smart home with 3 levels of detecting calibration. Z-wave plus and z-wave s2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. 3-in 1 motion, trisensor also detects temperature -10~50°c / 14~122°c with accracy of ±1°C, Light sensor. Powered by 1 x cr123a battery, estimated battery life: 1 Year. Z-wave plus certification number: ZC10-18056128. Battery not packed with the box. Wireless and cordless.
BrandAEOTEC #ad
ManufacturerAeotec #ad
Height1.77 Inches
Length1.77 Inches
Weight0.18 Pounds
Width1.46 Inches
Part NumberZWA005-A



White, Samsung SmartThings GP-U999SJVLBAA Magnetic Motion Sensor

SAMSUNG #ad - Detection ready:  adjust the sensor with the quick tilt magnetic ball mount to capture motion up to 15 feet with 120 degree view range. Home automation: set devices to automatically turn on or off as people come and go to minimize energy usage. Requirements: must have smartthings App and SmartThings Hub or compatible device with SmartThings Hub functionality connected devices sold separately. Compatibility: works with google, SmartThings, Alexa, and Z-Wave and ZigBee communication protocols.24/7 monitoring: receive alerts when there’s unexpected movement in your home.
BrandSAMSUNG #ad
ManufacturerSamsung HI #ad
Height1.98 Inches
Length2.23 Inches
Weight0.21 Pounds
Width2.19 Inches
Part NumberGP-U999SJVLBAA
Warranty1 Year Limited

5. GE


Scene Activation, Wink, Works with SmartThings, 180 Degree Detection Range, Shelf, GE Enbrighten Z-Wave Plus Smart Motion Sensor, On/Off after No Motion is Detected, Table, or Wall Mount, 34193

GE #ad - From the closest hub or Z-Wave device also enhances versatility. Whole-room coverage – a reach of up to 45ft. Wireless convenience – send notifications to mobile devices, trigger scenes and activate lights wirelessly any time movement is detected.

Place anywhere – included mounting hardware for wall or ceiling installation combined with the option to place the sensor on tables, shelves, desks or other flat surfaces supports use in any indoor location. The option to power the sensor with a micro USB cable sold separately activates the Z-Wave signal-repeater function and is perfect for even the busiest areas of your home. Requires z-wave-certified gateway – compatible with the following Z-Wave hubs: SmartThings, Wink, Nexia and Trane.

The signal range of up to 150ft. Power options – two included cr123a batteries last up to two years and support portable use. And up to 180-degree coverage range complemented by three sensitivity settings – low/medium/high – accommodates rooms of every size. It is ideal for high-traffic areas, counters, common rooms and halls, like entryways, when powered by an optional micro USB cable.
BrandGE #ad
ManufacturerJasco #ad
Height7.18 Inches
Length2.6 Inches
Weight0.4 Pounds
Width4.66 Inches
Part Number34193

6. GE


Vacancy / Occupancy Sensor, Zwave Hub Required, Wink, Includes White and Lt. Almond, On/Off, GE Enbrighten Z-Wave Plus Smart Motion Sensor Light Switch, 26931, and Alexa, Works with SmartThings

GE #ad - Full-home coverage – z-wave plus works with all previous z-wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft.

With five time-out duration options ranging from five seconds to 30 minutes and up to 180-degree detection coverage, versatile scheduling and convenient alerts with remote operation and voice control when connected to a compatible hub. Neutral wire requirED. Includes white and light almond cover buttons wall plate not included. 3-way ready – the smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199 or 46200 Works with the following z-wave certified hubs: smartthings, adt command, Trane, ADT Pulse, Honeywell, Ring Alarm, Harmony Home Hub Extender, Nexia, Vivint, Wink, Home Seer, Vera and more.

Additionally, vacancy and manual. Up to four add-on switches can be connected to the same device. Voltage:120 volt. Extended signal range increases your home automation coverage to enhance your control. Voice control – alexa & google assistant compatible requires a z-wave certified hub.
BrandGE #ad
ManufacturerJasco #ad
Height3 Inches
Length1.5 Inches
Weight0.4 Pounds
Width1.5 Inches
Part Number26931
Warranty2-Year Limited Warranty



Requires Samsung SmartThings Hub, Bosch Pro-Grade ZigBee Wireless Motion Detector ISW-ZPR1-WP13

BOSCH #ad - 6 year battery life on standard AA Alkaline batteries. Flexible mounting Height means no installer adjustments necessary. Zigbee ha1. 2 certified. Requires samsung SmartThings Hub with device handler Instructions included. Pet immunity up to 31 pounds and First Step Processing FSP.
BrandBOSCH #ad
Height2 Inches
Length5 Inches
Width3 Inches
Part NumberISW-ZPR1-WP13

8. Philips Hue


Installation-Free, Exclusively for Philips Hue Smart Bulbs, Smart Home, Philips Hue Indoor Motion Sensor for Smart Lights Requires Hue Hub

Philips Hue #ad - The philips hue motion sensor requires a philips Hue bridge to make it part of your smart home lighting system. Installed in a minute. The philips hue smart motion sensor combines convenience and energy effeciency. The integrated light sensor saves energy by detecting when rooms are vacant and automatically turning off lights.

Place anywhere in your home including your hallway, bathroom, kitchen, and more. The philips hue system can control up to 50 smart lights. The smart sensor detects optimum daylight levels to conserve energy during the day. The device is battery powered, wireless and installation free no re-wiring required to control your lights without hassle. The philips hue motion sensor can be placed freely for an optimal detection area, or mounted to a wall using screws included. Our smart lights default settings get you going, or personalize these settings to fit your needs.

When you use the philips hue motion sensor with a Philips Hue bridge, you can use it to control any HomeKit compatible appliance. Simply follow the instructions in the Philips Hue app. Have your lights turn on when you walk into a room, and off when you leave. During the night the philips hue motion Sensor will switch to smart night light settings: a gentle, warm light setting to help you navigate during the night without disturbing your rest.
BrandPhilips Hue #ad
ManufacturerCQMTO #ad
Height3.94 Inches
Length3.15 Inches
Weight0.03 Pounds
Width4.33 Inches
Part Number929001260762



AGSHOME ZIGBEE Motion Sensor for Echo Plus Echo Studio & Echo Show 2nd Generation

AGSHOME #ad - This zigbee motion sensor is fully compatible with Amazon Echo Plus and Echo Show 2nd Gen. Once the motion sensor is added, it is possible to create all types of pre-defined routines in Alexa app. You may set it up to have your hue lights switched on when a motion is detected, and switch them off when there is no motion for a certain period.

Not compatible with philips hue! plEASE refrain from purchasing if have no idea about Zigbee or do not own a compatible Zigbee Gateway. Multiple ways to use with alexa routines, e. G. Compatible with echo pluscan not see the status in the alexa app, deconz, echo show 2 gen, echo studio, raspbee, Hubitat Elevation This is not WIFI device.

The smart sensor required hub, it's works with 3xaaa battery and it can work continuously for 6 months in 2 min mode4min mode up to 12 months batteries not included. Please read connecting steps on image or the instruction manual which in the package first before the smart sensor was installed. Easy setup, simply reset the device and ask Alexa to discover new devices. Expand your echo's Zigbee functionality(not compatible with smartthings.
BrandAGSHOME #ad
Manufacturershenzhen daping computer co,.ltd #ad
Part NumberDP-ZGMD2

10. Samsung Electronics


Samsung SmartThings Motion Sensor

Samsung Electronics #ad - Trigger lights to automatically turn on when you enter a room or turn off when there's no motion for a specified length of time. Additional requirements: Samsung SmartThings Hub. Trigger your smart thermostat, A/C unit or portable heater to automatically adjust based on temperature or when people come and go. Receive an immediate alert if unexpected motion is detected while you're away or asleep. Save energy by turning off lights and electronics when people leave home or when no motion is detected. Measurements: 2 inches wide, 2 inches tall and 08 inches thick.
BrandSamsung Electronics #ad
ManufacturerSmartThings #ad
Height0.8 Inches
Length2 Inches
Weight2 Pounds
Width2 Inches
Part NumberF-CEN-IRM-1