As an Amazon Associate I earn from qualifying purchases.


Powerful vacuum motor pulls 70-100 cfm depending on filter type.







Broken-down, reclaimed abrasive stays in reclaimer and can be drained into a bucket and poured back into your cabinet for reuse. Collects 30-40% of reusable abrasive, and extends vac bag/filter and motor life! Skat blast vacuum abrasive Reclaimer mounts in-line between your abrasive blast cabinet and vacuum.
1. Skat Blast
#ad
Skat Blast Sandblast Cabinet Vacuum Motor 6008-00 Bundled with Skat Blast HEPA Filter Cartridge 6011-HEPA
#adSkat Blast #ad - 2-pc bundle kit includes: powerful usa-made 115 volt vacuum motor 6008-00 with 8 ft cord and washable Skat Blast HEPA filter cartridge 6011-HEPA for higher dust filtration and improved visibility. Therefore, 45, 50, always change filter cartridge when installing a new vac motor.More information #ad
Vacuum motor - 5-3/4" dia, 4-5/8"h. Fits skat blast vac-55, abrasive will leak through the filter and into the bearings of the motor, and 40 Vacuums only. Hepa filter cartridge - 7-1/4" dia, 8"h. If worn, causing premature motor failure. Most vacuum motor failure is caused by a worn filter.Brand | Skat Blast #ad |
Manufacturer | Skat Blast #ad |
Part Number | 6008-HPK |
More information #ad
2. Skat Blast
#ad
45 & 40, Skat Blast Vacuum HEPA Filter Cartridge for Skat Blast Vac-55, 50, 6011-HI
#adSkat Blast #ad - Replacement filter cartridges for Vac-55, 50, 45 & 40 Skat Blast Vacuums. Non-stick filter membrane resists clogging - dust and dirt simply fall off the filter surface before it can build up. Trap any ultra-fine dust particles down to 03 microns particles about 1/300th the diameter of a strand of hair and keep 99.More information #ad
97% dust inside the vac or dust collector and out of your shop! The ultra-fine filtration prevents vacuum motor failure caused by dust entering the motor. 8"h, 7-1/4"dia. Washable, air-dry type.Brand | Skat Blast #ad |
Manufacturer | Skat Blast #ad |
Weight | 3 Pounds |
Part Number | 6011-HI |
More information #ad
3. Skat Blast
#ad
Skat Blast Replacement Vacuum Motor for Skat Blast Sandblasting Cabinet Vacuums, 6008-00, Made in USA
#adSkat Blast #ad - Vac motors sold without filter cartridge or bag - NO WARRANTY. Tech tip: check vacuum bag/filter on a regular basis for pinholes or weak areas, as abrasive may leak through the bag/filter and into bearings of the motor, causing premature motor failure.Powerful vacuum motor pulls 70-100 cfm depending on filter type.
More information #ad
115 volt brush-type, 20, 7 amp, 000 rpm. Includes 8 ft cord. 5-3/4" diameter, 60 cycle, 1 hp, 4-5/8" high. Made in USA. Requires filter or bag. Fits all skat blast vacuums vac-55, 45, 36, 40, 50, 35, or 34. We suggest always changing your Vac Bag/Filter when changing Vacuum Motor.Brand | Skat Blast #ad |
Manufacturer | Skat Blast #ad |
Weight | 3.15 Pounds |
Part Number | 6008-00 |
More information #ad
4. Skat Blast
#ad
Made in USA, Skat Blast Old-Style Vac-34 Sandblasting Cabinet Vacuum Quiet Kit 6014-01
#adSkat Blast #ad - 11" diameter, 8-3/4" high. Only 72-76 decibels - this is about half the sound level of your original Vac-34. Kit includes: new blower guard cover with inner baffle and sound deadening, special coupler to seal electrical cord, mounting hardware, new electrical cord 8'L 18/3, sealed outlet ferrule, gasket to fit between top bucket and top cover to cushion sound, and instructions.More information #ad
Made in USA. Convert your old-style vac-34 vacuum prior to 1999 to a "QUIET" Vac.Brand | Skat Blast #ad |
Manufacturer | Skat Blast #ad |
Height | 8.75 Inches |
Length | 0 Inches |
Width | 0 Inches |
Part Number | 6014-01 |
Model | 6014-01 |
More information #ad
5. Skat Blast
#ad
6011-HEPA, 50, Made in USA, Skat Blast Vacuum HEPA Filter Cartridge for 180-DC & 310-DC, Also Fits Vac-55, 45 & 40
#adSkat Blast #ad - Non-stick filter membrane resists clogging - dust and dirt simply fall off the filter surface before it can build up. Trap any ultra-fine dust particles down to 03 microns particles about 1/300th the diameter of a strand of hair and keep 99.More information #ad
97% dust inside the vac or dust collector and out of your shop! The ultra-fine filtration prevents vacuum motor failure caused by dust entering the motor. Made in uSA! Washable, air-dry type. 8"h, 7-1/4"Dia. Replacement filter cartridges for vac-55, 50, 45 & 40 Skat Blast Vacuums and 180-DC & 310-DC Dust Collectors.Brand | Skat Blast #ad |
Manufacturer | Skat Blast #ad |
Weight | 3 Pounds |
Part Number | 6011-HEPA |
More information #ad
6. Skat Blast
#ad
Skat Blast Sandblasting Cabinet Vac-50 HEPA Vacuum Maintenance Kit #6011-40
#adSkat Blast #ad - A must kit to have on hand. This kit will also convert old-style skat Blast Vac-40 Vacuum to a HEPA Vacuum and increase its suction to 90-100 cfm. Keeps your skat blast vac-55 & 55 hepa vacuum performing like new! kit includes: 6011-10 final filter outlet kit optional on vac-55 & 50 to prevent dust from entering your shop in case of vac filter/motor failure; and replacement 6011-HI HEPA Filter Cartridge.More information #ad
Brand | Skat Blast #ad |
Manufacturer | Skat Blast #ad |
Part Number | 6011-40 |
More information #ad
7. Skat Blast
#ad
Skat Blast Vacuum Adapter Kit for Skat Blast Sandblast Cabinets 6017-02
#adSkat Blast #ad - Made in USA. Has 2-1/4" diameter inlet fitting. Mounts to the side of your cabinet to adapt a Skat Blast Vacuum. Includes mounting hardware.More information #ad
Brand | Skat Blast #ad |
Manufacturer | Skat Blast #ad |
Part Number | 6017-02 |
More information #ad
8. Skat Blast
#ad
Skat Blast Vacuum Hose, 5 ft Long 6009-05
#adSkat Blast #ad - Black. 2-1/4" od ends. Flexible, long-wearing. Fits 2-1/4" id vacuum hose fittings, most shop vacuums, and all Skat Blast Vacuums. Made in USA. 2-1/2" id vacuum hose connects vacuum to side of cabinet.More information #ad
Brand | Skat Blast #ad |
Manufacturer | Skat Blast #ad |
Weight | 1.2 Pounds |
Part Number | 6009-05 |
More information #ad
9. Skat Blast
#ad
8 ft Long, 6009-08, Made in USA, Skat Blast Vacuum Hose
#adSkat Blast #ad - Black. Fits 2-1/4" id vacuum hose fittings, most shop vacuums, and all Skat Blast Vacuums. Made in USA. 2-1/4" od ends. Flexible, long-wearing. 2-1/2" id vacuum hose connects vacuum to side of cabinet.More information #ad
Brand | Skat Blast #ad |
Manufacturer | Skat Blast #ad |
Weight | 1.7 Pounds |
Part Number | 6009-08 |
More information #ad
10. Skat Blast
#ad
Made in USA, Skat Blast Sandblasting Cabinet Direct Mount Vacuum Abrasive Reclaimer 6120-40
#adSkat Blast #ad - Sharp, reusable abrasive. For use with most skat blast vacuum Systems. During use, reclaimer instantly starts collecting and separating sharp, powderized abrasive travels through reclaimer and into vacuum where it is collected and can later be disposed of.Broken-down, reclaimed abrasive stays in reclaimer and can be drained into a bucket and poured back into your cabinet for reuse. Collects 30-40% of reusable abrasive, and extends vac bag/filter and motor life! Skat blast vacuum abrasive Reclaimer mounts in-line between your abrasive blast cabinet and vacuum.
More information #ad
Fits model 780, 951, sc-45v, 800-t, sc-28v, sc-58, sc-28, sc-33 & sc-33v lid to be relocated, 950, 850, 960-se, sc-34, 960-t, sc-35v, sc-46, 940-dlx, 960, 780-tl, 960-dlx, 970, sc-33v requires closing latch on 780-TL, 935, sc-40, 952, 930, 800-t, sc-33, 850-t, and 970-DLX cabinets.9-1/2"w, 8"d, 22"h. Made in USA.Brand | Skat Blast #ad |
Manufacturer | Skat Blast #ad |
Height | 22 Inches |
Length | 9.5 Inches |
Width | 8 Inches |
Part Number | 6120-40 |
More information #ad