Top 10 Skat Blast Nozzle – Sand Blaster Accessories, Parts & Media

As an Amazon Associate I earn from qualifying purchases.

1. Skat Blast

#ad

Made in USA, Skat Blast Medium Ceramic Nozzle Combo Pack for Skat Blast Power Siphon Sandblasting Guns, 6300-60

#ad
Skat Blast #ad - Ceramic nozzles last up to 3 times longer than steel, about 6-8 hours per nozzle. Operating pressure 60-100 psi. Because the size of the air jet must match the size of the nozzle, we make this convenient combo pack.

Nozzles: 1-5/8" long, 1/2" diameter, 1/4" i. D. Requires 10-15 cfm. Both the nozzle and air jet must be changed on a regular basis to keep your cabinet in good working order. To save wear on the power gun and air compressor, and for best overall results, replace nozzles promptly Replace air jet and gasket with every 2-3 nozzles. Combo pack includes: 5 ceramic nozzles, 2 air jets, 2 air jet gaskets, and 1 nozzle gasket. Skat blast siphon power guns have an air jet, which fits inside the end of the power head assembly directly behind the nozzle.
BrandSkat Blast #ad
ManufacturerSkat Blast #ad
Part Number6300-60

2. Skat Blast

#ad

Skat Blast S-35 & C-35 Pro-Series Power Head Assembly with Carbide Nozzle for S-35/S-25 and C-35/C-25 Sandblasting Cabinet Guns 6303-90C

#ad
Skat Blast #ad - Carbide nozzle outlasts 30 ceramic nozzles. Made in USA. Result: long-lasting performance and long life. Power head wears due to the abrasive stream, especially if nozzles and air jets are not changed promptly.

The pro-power head assembly includes: our skat blast head assembly manufactured from zamac, a harder material than aluminum, 3 medium air jets, longest-lasting 1/4" medium Tungsten Carbide Nozzle installed in the head, 2 air jet gaskets, our most-durable, and nozzle gasket. For long-lasting performance! our pro-series power head assembly is just what you need to bring your s-35/S-25 and C-35/C-25 Skat Blast Cabinet Gun back to factory-new performance. Fits old-style s-25 and C-25 Power Guns as well. Requires 10-15 cfm. 3-3/8"l, 3"h, 1"W.
BrandSkat Blast #ad
ManufacturerSkat Blast #ad
Height3 Inches
Length3.38 Inches
Width1 Inches
Part Number6303-90C

3. Skat Blast

#ad

Made in USA, 6300-20, Skat Blast Medium Steel Nozzle Combo Pack for Skat Blast Power Siphon Sandblasting Guns

#ad
Skat Blast #ad - Nozzles: 1-5/8" long, 1/2" diameter, 1/4" i. D. After 2-3 nozzles, replace the air jet and gasket. Because the size of the air jet must match the size of the nozzle, we make this convenient combo pack.

After 1-2 hours, the nozzle orifice becomes enlarged to the next size. It is best to change the nozzle at this time. Silver. Combo pack includes: 5 steel nozzles, 2 air jets, 2 air jet gaskets, and 1 nozzle gasket. Requires 10-15 cfm. Each will last approximately 1-2 hours. Both the nozzle and air jet must be changed on a regular basis to keep your cabinet in good working order. Operating pressure 60-100 psi. Skat blast siphon power guns have an air jet, which fits inside the end of the power head assembly directly behind the nozzle. Steel siphon nozzles are case hardened for longer life.
BrandSkat Blast #ad
ManufacturerSkat Blast #ad
Part Number6300-20

4. Skat Blast

#ad

Made in USA, 6300-90, Skat Blast Medium Carbide Nozzle Pack for Most Siphon Blasters & All Skat Blast Sandblasting Cabinets

#ad
Skat Blast #ad - Fits most siphon blasters and all Skat Blast Cabinets. Operating pressure 60-100 psi. Made in USA. Made of long-lasting tungsten carbide, each nozzle will outlast 30 ceramic, making it the most economical nozzle you can buy.

Medium: 1-9/16" long, 1/2" diameter, 1/4" I. D. Tech tip: the air jet and nozzle size must match. Example: small nozzle with small air jet. Require 10-15 cfm air. Otherwise, the power gun will not work. Includes: medium carbide nozzle, 2 air jet gaskets, 3 air jets, and nozzle gasket. To save wear on the gun power head, replace the air jet 3 times during the life of this carbide nozzle.
BrandSkat Blast #ad
ManufacturerSkat Blast #ad
Part Number6300-90

5. Skat Blast

#ad

Skat Blast Large Steel Nozzle Combo Pack for Skat Blast Power Siphon Sandblasting Guns, Made in USA, 6300-30

#ad
Skat Blast #ad - Operating pressure 60-100 psi. Made in USA. Steel siphon nozzles are case hardened for longer life. Each will last approximately 1-2 hours. Skat blast siphon power guns have an air jet, which fits inside the end of the power head assembly directly behind the nozzle.

It is best to change the nozzle at this time. Requires 20-25 cfm. Combo pack includes: 5 steel nozzles, 2 air jets, 2 air jet gaskets, and 1 nozzle gasket. Nozzles: 1-5/8" long, 1/2" diameter, 5/16" i. D. After 1-2 hours, the nozzle orifice becomes enlarged to the next size. After 2-3 nozzles, replace the air jet and gasket. Black in color. Because the size of the air jet must match the size of the nozzle, we make this convenient combo pack. Both the nozzle and air jet must be changed on a regular basis to keep your cabinet in good working order.
BrandSkat Blast #ad
ManufacturerSkat Blast #ad
Part Number6300-30

6. Skat Blast

#ad

6300-10, Skat Blast Small Steel Nozzle Combo Pack for Skat Blast Power Siphon Sandblasting Guns, Made in USA

#ad
Skat Blast #ad - Because the size of the air jet must match the size of the nozzle, we make this convenient combo pack. Steel siphon nozzles are case hardened for longer life. It is best to change the nozzle at this time.

After 1-2 hours, the nozzle orifice becomes enlarged to the next size. Combo pack includes: 5 steel nozzles, 2 air jets, 2 air jet gaskets, and 1 nozzle gasket. Gold in color. Both the nozzle and air jet must be changed on a regular basis to keep your cabinet in good working order. Nozzles: 1-5/8" long, 1/2" diameter, 13/64" i. D. Operating pressure 60-100 psi. Requires 4-8 cfm. After 2-3 nozzles, replace the air jet and gasket. Skat blast siphon power guns have an air jet, which fits inside the end of the power head assembly directly behind the nozzle. Each will last approximately 1-2 hours.
BrandSkat Blast #ad
ManufacturerSkat Blast #ad
Part Number6300-10

7. Skat Blast

#ad

Made in USA, Skat Blast Large Ceramic Nozzle Combo Pack for Skat Blast Power Siphon Sandblasting Guns, 6300-70

#ad
Skat Blast #ad - To save wear on the power gun and air compressor, and for best overall results, replace nozzles promptly Replace air jet and gasket with every 2-3 nozzles. Made in USA.

Requires 20-25 cfm. Combo pack includes: 5 ceramic nozzles, 2 air jets, 2 air jet gaskets, and 1 nozzle gasket. Because the size of the air jet must match the size of the nozzle, we make this convenient combo pack. Nozzles: 1-5/8" long, 1/2" diameter, 5/16" i. D. Skat blast siphon power guns have an air jet, which fits inside the end of the power head assembly directly behind the nozzle. Both the nozzle and air jet must be changed on a regular basis to keep your cabinet in good working order. Operating pressure 60-100 psi. Ceramic nozzles last up to 3 times longer than steel, about 6-8 hours per nozzle.
BrandSkat Blast #ad
ManufacturerSkat Blast #ad
Part Number6300-70

8. Skat Blast

#ad

Skat Blast C-35-M Medium Foot-Pedal Operated Power Gun for Skat Blast Sandblasting Cabinets, Made in USA

#ad
Skat Blast #ad - Skat blast gun power head is manufactured from Zamac, a harder material than aluminum for longer life; and has a case-hardened insert for better fit against back side of nozzle. 7-3/4" wide, 6-1/2" high, 571.

Complete with steel nozzle and air jet installed in gun, 1" deep. Patent No. For siphon blasting only. Sturdy and dependable, more powerful blast, features include larger direct air passages for increased air volume and better suction. D760, two ceramic nozzles, and allen wrench. Siphon gun requires 10-15 cfm, 5-7 hp air compressor. This results in a stronger, so powerful, it is often mistaken for a pressure blaster.

Your hose from pickup tube slips on power head. Skat blast "high-velocity" c-35 series power gun is foot-pedal operated and is the heart of skat blast's siphon system. The c-35 series power gun is used in all foot-pedal operated skat blast Cabinets. Accepts 5/8" ID siphon hose. Max 125 psi. Made in USA. Plus, ergonomic handle for operator comfort.
BrandSkat Blast #ad
ManufacturerSkat Blast #ad
Part NumberC-35-M

9. Skat Blast

#ad

Skat Blast Large Replacement Steel Siphon Nozzles 6313-03 for Skat Blast Siphon Power Sandblasting Guns, Made in USA

#ad
Skat Blast #ad - Include nozzle gasket. To save wear on the power head assembly, replace the air jet with every 2-3 nozzles. Requires 20-25 cfm. Steel siphon nozzles last about 1-2 hours each. Tech tip: the air jet and nozzle size must match. 3-pack. Case hardened for longer life. Replace as needed to save wear on the power head assembly. Otherwise, the power gun will not work. Example: small nozzle with small air jet. Large 5/16" id, black. Made in USA. Operating pressure 60-100 psi.
BrandSkat Blast #ad
ManufacturerSkat Blast #ad
Part Number6313-03
Model6313-03

10. Skat Blast

#ad

Skat Blast Small Steel Low-Air-Supply Nozzle Combo Pack 6311-04 for Skat Blast Siphon Power Sandblasting Guns

#ad
Skat Blast #ad - Nozzles: 1-5/8" long, 1/2" diameter, 13/64" I. D. To save wear on the power gun and air compressor, and for best overall results, replace nozzles promptly.

Skat blast siphon power guns have an air jet, which fits inside the end of the power head assembly directly behind the nozzle. Combo pack includes: 3 small steel nozzles, 1 small air jet, 1 air jet gasket, and 1 nozzle gasket. Both the nozzle and air jet must be changed on a regular basis to keep your cabinet in good working order. Replace air jet and gasket with every 2-3 nozzles. Made in USA. Because the size of the air jet must match the size of the nozzle, we make this convenient combo pack. Small low-air-supply nozzle combo pack - requires 7-10 cfm @ 60-100 psi.
BrandSkat Blast #ad
ManufacturerSkat Blast #ad
Part Number6311-04
Model6311-04