As an Amazon Associate I earn from qualifying purchases.
Certified: certified to 200 psi and 200 degrees F and can be reused up to 4 times. Installs in seconds: 3/4 inch x 1/2 inch Reducing Coupling requires no soldering, crimping, or glue; just push to create a watertight seal.


Behind the wall: approved for underground and behind walls without access panels wrapping required when burying underground.

Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Residential and commercial: all sharkbite fittings meet the same standards for commercial and residential plumbing applications.

Preferred by the pro: sharkbite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
Specs: made with dzr forged brass, this 90-degree reducing elbow can withstand 200 degrees F and 200 PSI. Sharkbite brass push reducing elbow: this push-to-connect fitting allows you to make a connection between two different-sized pipes quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs.

Specs: sharkbite water heater connectors feature a maximum working temperature of 200 degrees F and a maximum working pressure of 200 PSI; approved for gas water and electric heaters with flue vent. Versatile: this flexible water heater coupling works well with PEX tubing, PE-RT, CPVC, and copper pipes; integrated ball valve allows for easy shut off.
Easy to install: this brass push water heater fitting reduces the need for additional transition fittings; allows for quick and easy installation, with no tools, crimping, glue, or soldering required; remove using a disconnect clip or disconnect tongs.

Installs in seconds: 1/2 inch x 3/4 inch reducing ball valve requires no special tools, no soldering, no crimping or glue; push-to-connect design provides an efficient application that saves time and money -- just push to create a watertight seal.


Compatibility: these brass slip couplings work well with CPVC and copper pipes only; only one end of the coupling has a stop, allowing the opposite end to slide freely over the end of a pipe. Specs: made of high-quality forged dzr brass; these SharkBite slip couplings can withstand a working temperature of 200 degrees F and a working pressure of 200 PSI.
Preferred by the pro: sharkbite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use; suitable for commercial repairs or home improvement projects.

Easy to install: this brass push water heater fitting reduces the need for additional transition fittings; allows for quick and easy installation, crimping, with no tools, glue, or soldering required; remove using a disconnect clip or disconnect tongs.
Versatile: this flexible water heater coupling works well with PEX tubing, CPVC, PE-RT, and copper pipes. Sharkbite water heater connector: this portable water heater connector offered in braided stainless steel allows you to connect water heaters with existing pipes that don't line up quickly and easily; ideal for working in tight spaces.
1. SharkBite
#ad
CPVC, PEX Pipe, SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, U058LFA, Copper, Push to Connect Brass Plumbing Fitting, HDPE, PE-RT
#adSharkBite #ad - High quality: sharkbite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure clean, leak-free connections.Certified: certified to 200 psi and 200 degrees F and can be reused up to 4 times. Installs in seconds: 3/4 inch x 1/2 inch Reducing Coupling requires no soldering, crimping, or glue; just push to create a watertight seal.
More information #ad
Quality: shark bite quality and performance is field-proven with more than 550 million connections; Shark Bite is the only push-to-connect brand that can ensure a clean, leak-free connection. Versatile: fit copper, cpvc, and PEX pipe and connects all 3 types in any combination.Brand | SharkBite #ad |
Manufacturer | Cash Acme #ad |
Height | 2 Inches |
Length | 7 Inches |
Weight | 0.05 Pounds |
Width | 5 Inches |
Part Number | U058LFA |
Model | U058LFA |
Warranty | Lifetime |
More information #ad
2. SharkBite
#ad
Copper, PEX Pipe, HDPE, Push to Connect Brass Plumbing Fitting, U116LFA, CPVC, SharkBite 1/2 Inch x 3/4 Inch MNPT Reducing Adapter, PE-RT
#adSharkBite #ad - Constructed of ds brass. Manufactured in China. 1/2" x 3/4", lead free, reducing connector, male iron pipe, shark bite push fit fittings for use with Copper tubing cts, CPVC & pex with integral tube liner included. Country of Origin: China.More information #ad
Brand | SharkBite #ad |
Manufacturer | Cash Acme #ad |
Height | 6.8 Inches |
Length | 1.3 Inches |
Weight | 0.21 Pounds |
Width | 4.5 Inches |
Part Number | U116LFA |
Model | U116LFA |
Warranty | Lifetime |
More information #ad
3. SharkBite
#ad
SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Copper, Push To Connect Brass Plumbing Fitting, U412LFA, CPVC, PEX Pipe, PE-RT, HDPE
#adSharkBite #ad - Versatile: connect different-sized peX, CPVC, PE-RT, copper, and HDPE pipe in any combination. Certified: can be used in wet lines; shark bite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.Behind the wall: approved for underground and behind walls without access panels wrapping required when burying underground.
More information #ad
Quality: shark bite quality and performance is field-proven with more than 550 million connections; Shark Bite is the only push-to-connect brand that can ensure a clean, leak-free connection. Installs in seconds: reducing tee requires no soldering, crimping, or glue; Just push to create a watertight seal.Brand | SharkBite #ad |
Manufacturer | Cash Acme #ad |
Height | 6 Inches |
Length | 13 Inches |
Width | 5 Inches |
Part Number | U412LFA |
Model | U412LFA |
Warranty | Lifetime |
More information #ad
4. SharkBite
#ad
PE-RT, SharkBite 1/2 Inch x 3/4 Inch MHT Washing Machine Straight Valve, CPVC, PEX Pipe, Push to Connect Brass Plumbing Fitting, HDPE, Copper, 25559LF
#adSharkBite #ad - Just push to create a watertight seal. Use in potable water and hydronic heating applications. Installs in seconds: washing machine Straight Valve requires no special tools, no soldering, no crimping, unions or glue.Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection. Residential and commercial: all sharkbite fittings meet the same standards for commercial and residential plumbing applications.
More information #ad
Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Performance: rated to 200 psi and 200 Degrees F. Versatilty: sharkbite connects copper, CPVC, PEX, and PE-RT Pipe in any combination.Brand | SharkBite #ad |
Manufacturer | Cash Acme #ad |
Height | 7 Inches |
Length | 4.38 Inches |
Width | 3.28 Inches |
Part Number | 25559LF |
Model | 25559LF |
More information #ad
5. SharkBite
#ad
Push to Connect Brass Plumbing Fitting, U274LF, Pack of 6, SharkBite 3/4 Inch x 1/2 Inch 90 Degree Reducing Elbow, PE-RT, PEX Pipe, HDPE, CPVC, Copper
#adSharkBite #ad - Versatile: pushfit 90-degree reducing elbows work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes. Easy to install: the innovative push-to-connect design of the SharkBite brass push 90-degree reducing elbow allows for quick and easy installation, crimping, glue, with no tools, or soldering required; can be installed in wet lines.Preferred by the pro: sharkbite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
More information #ad
Specs: made with dzr forged brass, this 90-degree reducing elbow can withstand 200 degrees F and 200 PSI. Sharkbite brass push reducing elbow: this push-to-connect fitting allows you to make a connection between two different-sized pipes quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs.
Brand | SharkBite #ad |
Manufacturer | Cash Acme #ad |
Height | 1 Inches |
Length | 8 Inches |
Weight | 0.2 Pounds |
Width | 4.5 Inches |
Part Number | U274LFA |
Model | U274LFA |
Warranty | Lifetime |
More information #ad
6. SharkBite
#ad
HDPE, PEX Pipe, PE-RT, Push To Connect Brass Plumbing Fitting, Copper, CPVC, SharkBite 1/2 Inch Ball Valve x 3/4 Inch FIP x 18 Inch Stainless Steel Braided Flexible Water Heater Connector, U3068FLEX18BVLF
#adSharkBite #ad - Sharkbite water heater connector: this portable water heater connector offered in braided stainless steel allows you to connect water heaters with existing pipes that don't line up quickly and easily; ideal for working in tight spaces.Specs: sharkbite water heater connectors feature a maximum working temperature of 200 degrees F and a maximum working pressure of 200 PSI; approved for gas water and electric heaters with flue vent. Versatile: this flexible water heater coupling works well with PEX tubing, PE-RT, CPVC, and copper pipes; integrated ball valve allows for easy shut off.
More information #ad
Preferred by the pro: sharkbite tools and fittings meet the same high standards for commercial and residential plumbing applications; suitable for commercial repairs or home improvement projects; ensures clean, leak-free connection and is lead-free. Easy to install: this brass push water heater fitting reduces the need for additional transition fittings; allows for quick and easy installation, with no tools, crimping, glue, or soldering required; remove using a disconnect clip or disconnect tongs.
Brand | SharkBite #ad |
Manufacturer | Cash Acme #ad |
Height | 6 Inches |
Length | 6 Inches |
Weight | 0.9 Pounds |
Width | 3 Inches |
Part Number | U3068FLEX18BVLF |
Model | GIDDS-2465699 |
Warranty | Limited 25 Year |
More information #ad
7. SharkBite
#ad
22973LF, SharkBite 3/4 Inch x 1/2 Inch Ball Valve, HDPE, Push to Connect Brass Fitting, CPVC, Water Shut Off, Copper, PEX Pipe, PE-RT
#adSharkBite #ad - Quality: only sharkBite's quality and performance is field-proven. Versatile: shark bite ball valve plumbing fittings fit Copper, PEX, CPVC, PE-RT, and HDPE Pipe and connects them in any combination.Installs in seconds: 1/2 inch x 3/4 inch reducing ball valve requires no special tools, no soldering, no crimping or glue; push-to-connect design provides an efficient application that saves time and money -- just push to create a watertight seal.
More information #ad
Performance: sharkbite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit. Preferred by the pro: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.Brand | SharkBite #ad |
Manufacturer | Cash Acme #ad |
Height | 0.78 Inches |
Length | 5.13 Inches |
Weight | 0.46 Pounds |
Width | 1.78 Inches |
Part Number | 3/4 in. x 1/2 in. |
Model | 3/4 in. x 1/2 in. |
More information #ad
8. SharkBite
#ad
SharkBite 3/4 Inch x 1/2 Inch Outlet 4 Port Closed Multi-Port Tee, Push to Connect Brass Plumbing Fittings, 25555LF, PEX Pipe, Copper, PVC
#adSharkBite #ad - Profile: complete metal brackets with shallow depth. Construction: stainless-steel construction for durability and corrosion-resistance. Loops: 4 loops featuring integrated SharkBite Push-to-connect fittings.More information #ad
Valves: flow-balancing valves and flow meters to avoid waste and ensure thermal comfort. Gauges: temperature gauges on supply and return manifolds to ensure proper supply temperature and evaluate heat loss at the return manifold.Brand | SharkBite #ad |
Manufacturer | Cash Acme #ad |
Height | 9.75 Inches |
Length | 4.38 Inches |
Weight | 0.74 Pounds |
Width | 2.68 Inches |
Part Number | 25555LF |
Model | 25555LF |
More information #ad
9. SharkBite
#ad
1/2-inch, Copper, U3016LFA 3/4 inch Repair Plumbing Fitting Pipe Connector, Push-to-Connect, CPVC, Brass, SharkBite Slip Coupling
#adSharkBite #ad - Easy to install: the innovative push-to-connect design of the Sharkbite brass slip connectors allows for quick and easy installation, glue, crimping, with no tools, or soldering required; can be installed in wet lines.Compatibility: these brass slip couplings work well with CPVC and copper pipes only; only one end of the coupling has a stop, allowing the opposite end to slide freely over the end of a pipe. Specs: made of high-quality forged dzr brass; these SharkBite slip couplings can withstand a working temperature of 200 degrees F and a working pressure of 200 PSI.
More information #ad
Sharkbite brass slip coupling: this push-to-connect full flow fitting allows you to repair a burst or a leak easily and efficiently; does the job of two couplings and extra pipe; remove using a disconnect clip or disconnect tongs. Preferred by the pro: sharkbite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use; suitable for commercial repairs or home improvement projects.
Brand | SharkBite #ad |
Manufacturer | Cash Acme #ad |
Height | 2 Inches |
Length | 5 Inches |
Weight | 0.2 Pounds |
Width | 9 Inches |
Part Number | U3008LFA |
Model | U3008LFA |
Warranty | Limited 25 Year |
More information #ad
10. SharkBite
#ad
U3068FLEX18LF, Push To Connect Brass Plumbing Fitting, Copper, PEX Pipe, SharkBite 1/2 Inch x 3/4 Inch FIP x 18 Inch Stainless Steel Braided Flexible Water Heater Connector, HDPE, CPVC, PE-RT
#adSharkBite #ad - Preferred by the pro: sharkbite tools and fittings meet the same high standards for commercial and residential plumbing applications; suitable for commercial repairs or home improvement projects; ensures clean, leak-free connection and is lead-free.Easy to install: this brass push water heater fitting reduces the need for additional transition fittings; allows for quick and easy installation, crimping, with no tools, glue, or soldering required; remove using a disconnect clip or disconnect tongs.
More information #ad
Specs: sharkbite water heater connectors feature a maximum working temperature of 200 degrees F and a maximum working pressure of 200 PSI; approved for gas water and electric heaters with flue vent. Versatile: this flexible water heater coupling works well with PEX tubing, CPVC, PE-RT, and copper pipes. Sharkbite water heater connector: this portable water heater connector offered in braided stainless steel allows you to connect water heaters with existing pipes that don't line up quickly and easily; ideal for working in tight spaces.
Brand | SharkBite #ad |
Manufacturer | Cash Acme #ad |
Height | 1.3 Inches |
Length | 18.3 Inches |
Weight | 0.5 Pounds |
Width | 1.3 Inches |
Part Number | U3068FLEX18LF |
Model | 18 in. |
Warranty | Limited 25 Year |
More information #ad