Top 10 Pull Bar for Vinyl Plank Flooring – Wood Flooring

As an Amazon Associate I earn from qualifying purchases.

1. Poweka

#ad

Heavy Duty Pull bar for Vinyl Plank Flooring and Laminate Wood Flooring Installation Tool,12.2 inch Long

#ad
Poweka #ad - Good fuction:this flooring installation pull bar tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.

Perfect design :pull bar used for laminate, vinyl plank, tongue-and-groove, wood flooring and hardwood flooring installation. Enhanced pull bar:made from premium a3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance. The soft pads on the back can well protect the floor from scratch. Fit for:suitable for 027in 7mm - 06in 15mm laminate or hardwood flooring. Upgrade size:12. 2 inch /310mm long, 4mm thick upgraded pull bar is more longger and thicker than the normal design. The normal design are usually only 3 mm thick, 105 inch long and easily deformed.
BrandPoweka #ad
ManufacturerPoweka #ad

2. WorkPro

#ad

Heavy Duty Pull Bar, WORKPRO Laminate Wood Flooring Installation Kit with Reinforced Double-Faced Mallet, Tapping Block and 30-Piece Spacers Included

#ad
WorkPro #ad - The mallet head is 1-3/8 inch in diameter. The whole mallet is 10-3/4 inch long and weighs 1. 036lb. The kit is perfect for domestic and professional use for laminate or hardwood flooring with guaranteed quality. Enhanced pull bar: made from premium a3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance.

The handle is made of American hickory which is lightweight but tough. You are always welcomed to contact us for warranty service whenever there is any problem with the product. The double-faced solid PVC head delivers a softened, positive strike. The approximate size of the spacer 2-3/8 x 1-1/8 inch. Solid tapping block: the tapping block made from polypropylene is designed solid, which is more sturdy and durable.

The approximate size of the block is 7-7/8 x 2-1/2 x 3/4 inch. Reinforced mallet: constructed of cast iron with bright chrome plating, the hammer is equipped with the hardness of 90±5 HAS. The pull bar is 12-1/4 inch long and 1-1/8 inch thick, which is superior to the normal design. The soft pads on the back can well protect the floor from scratch. 30-piece spacers: the kit comes with 30 pieces plastic spacers which are designed with non-slip slots.
BrandWorkPro #ad
ManufacturerHANZGHOU GREATSTAR INDUSTRIAL CO.LTD #ad

3. Norske

#ad

Norske Tools NMAP007 Heavy Duty Pull and Pry Bar for Laminate and Hardwood flooring installation

#ad
Norske #ad - Designed to close gaps and seams in hardwood, engineered and laminated floors without causing damage. Item package weight: 4. 3 pounds. Package height: 5. 5 inches. Solid steel construction, built tough for heavy duty use.
BrandNorske #ad
ManufacturerNorske Tools Ltd #ad
Weight4.3 Pounds
Part NumberNMAP007
ModelNMAP007

4. REXBETI

#ad

Pull Bar and Mallet, Upgraded Tapping Block, REXBETI Laminate Wood Flooring Installation Kit with 30 Spacers

#ad
REXBETI #ad - An ideal tool to install your laminate wood flooring faster. Upgraded tapping block to install countless flooring. Complete tool kit contains all the essentials you need, making your installation more convenient and easier. Suitable for 7-15mm028-059" laminate/hardwood flooring. 1x upgraded tapping block, 1x pull bar, 1x double headed mallet, 30x spacers.
BrandREXBETI #ad
ManufacturerREXBETI #ad
Part NumberREX88776
ModelEN-CFG

5. Bullet Tools

#ad

Bullet Tools, 712HD Professional Heavy Duty Pull Bar and Pry Bar for Hard Flooring Installation

#ad
Bullet Tools #ad - 17 inches long. Heavy duty 1/4" plate steel construction means this may just be the last one you buy. Black powder coat. Fully felted bottom to protect your floor. Closes gaps when installing laminate and hardwood.
BrandBullet Tools #ad
Manufacturerbullet tools #ad
Height1 Inches
Length1 Inches
Width1 Inches
Part Number712HD
Model712HD
Warranty30-Day Satisfaction Guarantee

6. Poweka

#ad

265mm Pull Bar for Laminate Plank, Vinyl Plank Flooring and Wood Flooring Installation Tool(10.4in 10.4inch, 1

#ad
Poweka #ad - Package includes: 1*flooring Installation Pull Bar 104 in /265mm long. Non-marring: features a pair of soft, non-abrasive felt backing pads on both ends to protect the finish of the floor at the time of install.

Specs: the pair of precision formed lips are measured at 039in high to fit between the wall or end of the board and 09in high to strike with a mallet. Built with a thick 079in, premium steel construction and possesses an attractive powder coating protective finish. Perfect design :pull bar used for laminate, tongue-and-groove, vinyl plank, wood flooring and hardwood flooring installation. Fuction:this flooring installation pull bar tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.
BrandPoweka #ad
ManufacturerPoweka #ad
Part Numberpk

7. MOONWELL

#ad

MOONWELL Pull Bar for Laminate Plank and Wood Flooring Installation 13 inch

#ad
MOONWELL #ad - The short end is thinner than usual pull bars to fit tight spaces against a wall. For use with a mallet. Pro pull bar for vinyl plank, laminate and hardwood flooring installation. Used to pull planks together of tongue and groove. Made of manganese steel that is tough and durable.
BrandMOONWELL #ad
ManufacturerMOONWELL #ad
Height1.38 Inches
Length12.99 Inches
Width1.97 Inches
Part NumberTH008

8. Big Max Tool Works

#ad

USA Carpentry Tool w- 47 Years’ Experience! A Must Have Flooring Pull Bar for Hardwood, Vinyl Plank, and All Brands of Laminate Flooring, Big Max Pro Pull Bar w- Square Striking Head

#ad
Big Max Tool Works #ad - P> prevents marring of the edges of the planks. P>. P> backed by 47 years of experience in manufacturing floor installation tools. P>. P> applicable to all types of Tongue and Groove flooring. P>. P> felt pads to protect floor finish. P>. P> long lasting and durable. P>.
BrandBig Max Tool Works #ad
ManufacturerBig Max Tool Works #ad
Height1.75 Inches
Length12.5 Inches
Weight2 Pounds
Width3 Inches

9. Ziqi

#ad

ZIQI 13 Inch Laminate Wood Flooring Installation Kit, Manganese Steel Heavy Duty Laminate Flooring Pull Bar for Laminate Plank and Wood Flooring Installation Pull Bar KitBlack

#ad
Ziqi #ad - Non-marring: laminate wood flooring installation kit features a pair of soft, non-abrasive felt backing pads on both ends to protect the finish of the floor at the time of install. Function: commonly used for laminate flooring, or wood flooring, tongue-and-groove, this installation tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.

Perfect fit: laminate pull bar suitable for 027in 7mm - 059in 15mm hardwood flooring, Laminate Flooring & Vinyl Plank Flooring.

Enhanced flooring pull bar: Made from Solid steel constructions with matt coating, the pull bar kit designed with enhanced strength and corrosion resistance. Quick and efficient: install your new laminate or hardwood flooring quickly, efficiently and accurately; Laminate pull bar ideal for domestic and professional use with high quality.
BrandZiqi #ad
ManufacturerZiqi #ad
Part NumberZQUS-WoodFlooring-1PCS-BLACK-201225

10. CRAIN

#ad

Crain Knucklehead Pull Bar

#ad
CRAIN #ad - Unique designed Boxed "Knuckle-Shaped" Hammering Head. Felt pads on its Underside To Prevent Scratching. Can be used on hardwood flooring, Laminate Flooring & Vinyl Plank Flooring. 3/16" heavy gauge Steel Design. 3" wide design protects flooring / 14 1/2" Length Of Working Room When Used Near The Wall.
BrandCRAIN #ad
ManufacturerCRAIN #ad
Height0.04 Inches
Length15.75 Inches
Width2.76 Inches
Part NumberNo 560
ModelNo 560