As an Amazon Associate I earn from qualifying purchases.




You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Adopting high-cost, ul-certified american standard 14awg power cord which allowable passage with a large current that more than 30A, the Etoolcity Automatic Vacuum Switch can work stably within 3600W.
More safety. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems. Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work. The switch's shell has pc+abs V0 grade flame retardant material, it is more reliable and safe to protect work. Make the work more effective. Unique current sensing technology.


Application: this cksn375 3-3/4" wood lathe chuck Set includes a 4-jaw self-centering chuck and interchangeable jaws for bowls, spindles, and hard-to-hold projects. Material: phukimlong gear chuck made from high grade k1045 steel machined to allow closest tolerances is with Black oxidation treatment.
Jaw includes: interchangeable dovetail jaws, and internal/external grip jaws, step jaws, Interchangeable flat lathe chuck jaws with short and long multi-position grip-studs. Set includes: 1 3. 75 inch chuck body with 1”-8tpi thread, 1 3/4”-16 spindle adapter, 1 woodworm screw chuck, 5self-centering jaw sets, 8 screws, 1 gear key, 1 Allen wrench, 1 storage case.

For best results, pre-treat your workpiece with danish oil. Requires a lathe with a minimum of 1/2 horsepower and a heavy duty live tailstock center. This 3-step polishing system enables you to buff your woodturning projects directly on your lathe by mounting the included #2 Morse Taper mandrel in your lathe's headstock.

Installation: there are three installation methods for this kit, hook hanging or screw installation or 3M paste. Suitable for table saw, Planer, Vacuum, Sander, Work Light . Max motor should not exceed 120v/15a or 220v/10A, Miter Saw, Dust collector, 50/60Hz, 1875w.
Standard: ul-certified american standard 14awg power cord. When the a interface tool is started, B will delay 7s to power off. When the a port electrical appliance stops working, when the A port is powered on, the B port will be powered on. Safety: thick copper core, thicker wire, non-slip design at the plug, 105° flame retardant, less heat during use, easy to plug.

1. PSI Woodworking
#ad
PSI Woodworking LR220-3 Long Ranger III 220V Remote Dust Collector Starter Switch
#adPSI Woodworking #ad - 5hp. Fcc approved; rf signal goes through walls with no outside interference: Unlimited programmable frequencies; Extra Hand Controls available LRTM-3. Save yourself the inconvenience of walking over to turn on your dust Collector while you're in the middle of a critical project; simply press the transmitter on/off button to easily switch your dust Collector on or off.More information #ad
Includes: receiver, hand control, 9V battery. Input voltage 208-240 volts ac; maximum 16 amps; maximum horsepower 2. 50 foot range; 5 foot cord on receiver module; requires 9V battery included.Brand | PSI Woodworking #ad |
Manufacturer | PSI Woodworking #ad |
Height | 3.25 Inches |
Length | 5.5 Inches |
Weight | 2 Pounds |
Width | 7.75 Inches |
Part Number | LR220-3 |
Model | LR220-3 |
Warranty | 2 Years Under Normal Use |
More information #ad
2. WEN
#ad
WEN 3421 3.2-Amp 8" by 12" Variable Speed Mini Benchtop Wood Lathe
#adWEN #ad - 3. 2-amp motor provides over 50% more power than most 8-inch wood lathes. Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM. Features a 2.More information #ad
3-inch face plate, an MT1 spindle and tailstock taper, and two interchangeable tool rests. Fits workpieces up to 12 inches long and 8 inches wide. Perfect for pens, chess pieces, bowls, cups, and other small workpieces.Brand | WEN #ad |
Manufacturer | WEN #ad |
Part Number | 3421 |
Model | 3421 |
More information #ad
3. WEN
#ad
Basic w/ RF Remote 400 CFM, WEN 3410 3-Speed Remote-Controlled Air Filtration System 300/350/400 CFM
#adWEN #ad - Rf remote system allows for operation from any angle of the room, even if direct line of vision is obstructed. Noise rating – 50 to 60 dB. Includes a 1-micron filter and a 5-micron pre-filter, both of which can be easily replaced. Programmable timer automatically shuts unit off after set number of minutes.More information #ad
Dimensions – 17” l x 205” w x 10” h | electrical requirements – 120v, 60 hz, 1a | air flow – 300/350/400 cubic feet per minute | Cover rooms up to – 400 sq ft. Remote control allows users to set timer, change speed and power the unit on and off from up to 26 feet away.Brand | WEN #ad |
Manufacturer | Great Lakes Tool MFG INC #ad |
Height | 10 Inches |
Length | 17 Inches |
Weight | 31 Pounds |
Width | 20.5 Inches |
Part Number | 3410 |
Model | 3410 |
Warranty | 2 year |
More information #ad
4. PSI Woodworking
#ad
PSI LCENTLT2 No. 2MT Heavy Duty Live Tailstock Center
#adPSI Woodworking #ad - Large live lathe center. Cone is 2-1/2" by 1-11/16" overall diameter. Ball bearing precision; turns smoothly. 60-degree point. Huge live center for heavy duty workpieces.More information #ad
Brand | PSI Woodworking #ad |
Manufacturer | PSI Woodworking #ad |
Height | 2 Inches |
Length | 5.5 Inches |
Weight | 0.99 Pounds |
Width | 2 Inches |
Part Number | LCENTLT2 |
Model | LCENTLT2 |
Warranty | 2 Years Under Normal Use |
More information #ad
5. Etoolcity
#ad
Eliminating Circuit Breaker Tripping, Etoolcity Unique Current Sensing Technology to Delay Vacuum On to Prevent Circuit Overload, Automatic Vacuum Switch for Power Tools
#adEtoolcity #ad - Suitable for most medium duty workloads. Both ways are very strong. If the tool motor connected to the 'a' port exceeds 30w, the vacuum connected to the 'B' port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time.You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Adopting high-cost, ul-certified american standard 14awg power cord which allowable passage with a large current that more than 30A, the Etoolcity Automatic Vacuum Switch can work stably within 3600W.
More information #ad
Etoolcity automatic vacuum switch has a starting threshold of approximately 025 amps30watts at 120v and 60watts at 220v, table saws, power Sanders and Routers, perfectly suited for medium-sized work loads such as most Miter Saws, and extend the life of your vacuum. More safety. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems. Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work. The switch's shell has pc+abs V0 grade flame retardant material, it is more reliable and safe to protect work. Make the work more effective. Unique current sensing technology.
Brand | Etoolcity #ad |
Manufacturer | Etoolcity #ad |
Part Number | ec |
Model | LF40-HVC01 |
More information #ad
6. Shop Fox
#ad
Shop Fox W1666 2 HP 1550 CFM Dust Collector
#adShop Fox #ad - Static pressure: 12. 3-inch. Standard bag filtration: 2. 5 micron. Bag volume: 5. 4 cubic-Feet. Motor amplifier draw: 220-Volt to 12A. Air suction capacity: approximately 1, 550 CFM.More information #ad
Brand | Shop Fox #ad |
Manufacturer | Shop Fox #ad |
Height | 241 Inches |
Length | 24 Inches |
Weight | 98 Pounds |
Width | 46 Inches |
Part Number | W1666 |
Model | W1666 |
More information #ad
7. PHUKIMLONG
#ad
5 Jaws, CKSN375 Wood Lathe Chucks, 3.75" 4-Jaw Self-Centering Scroll Chuck with 1" x 8TPI Thread Woodworking Turning Tools Set Include3.75" Gear Chuck, 3/4"x16TPI Adapter, 1 Wood Screw
#adPHUKIMLONG #ad - For long term anti-rust performance. Lifetime warranty:phukimlong are committed to provide the best service for our customer on Amazon, if you have any questions about the product, please contact us, we will provide you with a satisfactory answer.Application: this cksn375 3-3/4" wood lathe chuck Set includes a 4-jaw self-centering chuck and interchangeable jaws for bowls, spindles, and hard-to-hold projects. Material: phukimlong gear chuck made from high grade k1045 steel machined to allow closest tolerances is with Black oxidation treatment.
More information #ad
Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life. Jaw includes: interchangeable dovetail jaws, and internal/external grip jaws, step jaws, Interchangeable flat lathe chuck jaws with short and long multi-position grip-studs. Set includes: 1 3. 75 inch chuck body with 1”-8tpi thread, 1 3/4”-16 spindle adapter, 1 woodworm screw chuck, 5self-centering jaw sets, 8 screws, 1 gear key, 1 Allen wrench, 1 storage case.
Brand | PHUKIMLONG #ad |
Manufacturer | PHUKIMLONG TOOLS #ad |
Part Number | CKSN375 |
Model | CKSN-375 |
More information #ad
8. PSI Woodworking
#ad
PSI Woodworking LBUFFSYS 3-Step Lathe Buffing System
#adPSI Woodworking #ad - Replacement wheels and buffing compound bars are available; tripoli: bar lbuffx1 & linen Wheel LBUFFW1; White Diamond: Bar LBUFFX2 & linen/flannel wheel LBUFFW2; Carbuba Wax: Bar LBUFFX3 & Flannel Wheel LBUFFW3.For best results, pre-treat your workpiece with danish oil. Requires a lathe with a minimum of 1/2 horsepower and a heavy duty live tailstock center. This 3-step polishing system enables you to buff your woodturning projects directly on your lathe by mounting the included #2 Morse Taper mandrel in your lathe's headstock.
More information #ad
System includes: 1 #2mt 16" heavy duty mandrel, 3 8" fabric buffing wheels Linen, hardware packet, 3 buffing compound bars Tripoli, linen/Flannel Combo, carnuba wax, White Diamond, Flannel, and instructions.Brand | PSI Woodworking #ad |
Manufacturer | PSI Woodworking #ad |
Height | 3 Inches |
Length | 17.5 Inches |
Weight | 7.21 Pounds |
Width | 9.75 Inches |
Part Number | LBUFFSYS |
Model | LBUFFSYS |
Warranty | two years |
More information #ad
9. SINKINGDOM
#ad
Eliminating Circuit Breaker Tripping SK50A, Delay On/Off Electrical Outlet Switches, SINKINGDOM Automatic Vacuum Switch for Dust Collector
#adSINKINGDOM #ad - You can contact sinkingdom after-sales service to apply for an extension of the warranty period, which can be extended to a maximum of 24 months. Warranty: a 360-day warranty is calculated from the date of purchase. Effectively improve work efficiency and improve equipment safety.Installation: there are three installation methods for this kit, hook hanging or screw installation or 3M paste. Suitable for table saw, Planer, Vacuum, Sander, Work Light . Max motor should not exceed 120v/15a or 220v/10A, Miter Saw, Dust collector, 50/60Hz, 1875w.
More information #ad
A is the main interface and B is the auxiliary interface. Our accessory kit contains three screws on the wall and a strong 3M sticker. Function: this socket is a combined switch, b interface will delay 1 second to supply power. Standard: ul-certified american standard 14awg power cord. When the a interface tool is started, B will delay 7s to power off. When the a port electrical appliance stops working, when the A port is powered on, the B port will be powered on. Safety: thick copper core, thicker wire, non-slip design at the plug, 105° flame retardant, less heat during use, easy to plug.
Brand | SINKINGDOM #ad |
Manufacturer | SINKINGDOM #ad |
Height | 1.69 Inches |
Length | 4.65 Inches |
Width | 2.87 Inches |
Part Number | SK50A |
More information #ad
10. PSI Woodworking
#ad
PSI Woodworking KWL-1018VS Turncrafter Commander 10" Variable Speed Midi Lathe
#adPSI Woodworking #ad - Distance between Centers 18". Etl listed and certified by Intertek. Tailstock & spindle bore 3/8". Headstock thread 1" x 8tpi. Quill travel 1-5/8". 24 indexing positions with spindle locking. Kwl-1018vs replaces tclc10vs.More information #ad
Powered by 3/4 hp variable speed high performance motor110v & an SBC microprocessor. Two belt positions: 500-2000 rpm & 1500-3600 RPM. See description below for all of the included parts. Swing over Bed 10". Convenient built-in handles. Headstock/tailstock Taper #2MT. Cast iron base.Brand | PSI Woodworking #ad |
Manufacturer | PSI Woodworking Products #ad |
Height | 17 Inches |
Length | 32 Inches |
Weight | 82 Pounds |
Width | 9 Inches |
Part Number | KWL-1018VS |
Model | KWL-1018VS |
Warranty | 3 years |
More information #ad