As an Amazon Associate I earn from qualifying purchases.
Fulton #ad - The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. 1 hole is at 90 degrees while the 6 holes on both sides are at 22. 5, adjustable, 67. 5 and 90 degrees. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw.
The fulton miter gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs. The aluminum miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge.
The. 200” thick, 45, solid aluminum head is machined with 13 positive stop holes. The head is mounted to a solid steel miter bar that measure 18” in length and is. 354” thick by. 730” wide. This allows you to position the fence extra close to the saw blade with the power turned off so you have even more control over the workpiece you are cutting. Both ends of the fence are cut at exactly 45 degrees.
Fulton #ad - The head is mounted to a solid steel miter bar that measure 18” in length and is. 354” thick by. 730” wide. The steel miter bar is also equipped with spring loaded, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
The. 200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. The positive stops are perfect for many woodworking projects as they are the angles that are typically used. The steel miter bar is equipped with a metal, you can remove the disc. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. Not to mention that the fit in the miter slot may not be all that great as well. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired.
POWERTEC #ad - Function: a high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw band saws and other applications and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
Universal design: works with most contractor style, full sized saws, making it compatible with popular brand table saws, or tools with standard miter slots 3/4” width x 3/8” depth with or without T-slots, router tables, band saws, disk and belt sanders.
Precision: angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts. Please note : will not work with smaller saws or tool with 5/8” miter slots. Includes: 1 miter Gauge for Table Saw.
VEVOR #ad - It is an economical solution for your table saw crosscutting needs. Precise angle cutting: this table saw accessory is 004 inch / 1 mm high precision. Additional trim blocks raises working efficiency. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle.
Wide application: the table saw miter can improve the safety and accuracy of the table saw and the router table. Compatible standeded slot: our table saw sled is suitable for a standard 075 x 038-inch miter slot.
1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22. 5, 60 and 90 degrees. Miter gauge fence system is currently a must-have for every family. The adjustable, 30, 45, solid aluminum head is machined with 11 positive stop holes. Metric and imperial scale makes your work more convenient. Laser marking technology is friction-resistance to ensure accuracy.
INCRA #ad - Patented glidelock miter bar with 6 expansion points for quick repeats. 41 laser cut v-stops for extreme accuracy at all popular angles. Incra flip shop stop-Fence Positioner for optimal mitering accuracy.
VEVOR #ad - Compatible standeded slot: our table saw sled is suitable for a standard 075 x 038-inch miter slot. It is an economical solution for your table saw crosscutting needs. Metric and imperial scale makes your work more convenient. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle.
It also can be used for router tables and jointers. Laser marking technology is friction-resistance to ensure accuracy. Miter gauge fence system is currently a must-have for every family.
Premium sturdy construction: this woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. Simple & secure operation: an adjusting screw and guide wheel are added in the middle, secure, which is more convenient to insert into the slot hole and fix the seat. The adjustable, 30, 22. 5, 45, solid aluminum head is machined with 11 positive stop holes. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 60 and 90 degrees.
Saycker #ad - Material: this woodworking tool is made of alluminium alloy, ensuring its durability and sturdy. Perfect for wood cutting project: can be used for table saws, router tables, band saws, jointers.
Miter gauge fence system is currently a must-have for every family. Easy to use: both sides 60 angle adjustable, loosen the knob to quickly adjust the angle, Ideal for cross-cutting wood at a specific angle.
1. Fulton
#adFulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
#adThe fulton miter gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs. The aluminum miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge.
More information #ad
Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The. 200” thick, 45, solid aluminum head is machined with 13 positive stop holes. The head is mounted to a solid steel miter bar that measure 18” in length and is. 354” thick by. 730” wide. This allows you to position the fence extra close to the saw blade with the power turned off so you have even more control over the workpiece you are cutting. Both ends of the fence are cut at exactly 45 degrees.
| Brand | Fulton #ad |
| Manufacturer | Fulton Woodworking Tools Inc. #ad |
| Part Number | 11567 |
| Model | 11567 |
More information #ad
2. KREG
#adBlue, Kreg KMS7102 Table Saw Precision Miter Gauge System
#adKREG #ad - Vernier scale allows fast, 1/10th-degree angle adjustments. Guaranteed out of the box to. 003 accuracy of 6-inches. Factory calibration. Gauge head is cnc machine perfectly square to the bar and table no stampings.More information #ad
Our extremely straight 24 inch 610mm anodized-aluminum bar is 3/8 inch9. 5mm thick by 3/4 inch19mm wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver.| Brand | KREG #ad |
| Manufacturer | Kreg Tool Inc #ad |
| Height | 6.25 Inches |
| Length | 25.25 Inches |
| Weight | 6 Pounds |
| Width | 2.63 Inches |
| Part Number | KMS7102 |
| Model | KMS7102 |
| Warranty | LIMITED |
More information #ad
3. Fulton
#adFulton Precision Miter Gauge with a Standard Slot 3/4” x 3/8” Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc
#adThe. 200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. The positive stops are perfect for many woodworking projects as they are the angles that are typically used. The steel miter bar is equipped with a metal, you can remove the disc. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
More information #ad
You may also know that the miter gauge that came with your saw is not terribly accurate or durable. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit. To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. Not to mention that the fit in the miter slot may not be all that great as well. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired.
| Brand | Fulton #ad |
| Manufacturer | Fulton #ad |
| Part Number | 1250 |
More information #ad
4. POWERTEC
#adPOWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops
#adUniversal design: works with most contractor style, full sized saws, making it compatible with popular brand table saws, or tools with standard miter slots 3/4” width x 3/8” depth with or without T-slots, router tables, band saws, disk and belt sanders.
More information #ad
Features: a lightweight design with a durable laser-cut aluminum construction, universal fence mounting bracket, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, pivoting locking mechanism, large gauge handle, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit. Precision: angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts. Please note : will not work with smaller saws or tool with 5/8” miter slots. Includes: 1 miter Gauge for Table Saw.
| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 2.5 Inches |
| Length | 18.94 Inches |
| Weight | 2.58 Pounds |
| Width | 4.75 Inches |
| Part Number | 71142 |
| Model | 71142 |
More information #ad
5. VEVOR
#ad24" Aluminum Table Saw Miter Gauge w/ 60 Degree Angled Ends for Max. Stock Support and a Repetitive Cut Flip Stop, Miter Saw Fence w/Laser Marking Scale, VEVOR Precision Miter Gauge
#adWide application: the table saw miter can improve the safety and accuracy of the table saw and the router table. Compatible standeded slot: our table saw sled is suitable for a standard 075 x 038-inch miter slot.
More information #ad
The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting. Simple & secure operation: an adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22. 5, 60 and 90 degrees. Miter gauge fence system is currently a must-have for every family. The adjustable, 30, 45, solid aluminum head is machined with 11 positive stop holes. Metric and imperial scale makes your work more convenient. Laser marking technology is friction-resistance to ensure accuracy.
| Brand | VEVOR #ad |
| Manufacturer | VEVOR #ad |
| Height | 4.7 Inches |
| Length | 26.4 Inches |
| Weight | 4.7 Pounds |
| Width | 5.1 Inches |
| Part Number | 24 inch Table Saw Miter Gauge |
| Model | 24 inch Miter Gauge |
More information #ad
6. PORTER-CABLE
#adPorter Cable 514007535 Miter Gauge Assembly
#adPORTER-CABLE #ad - Part number 514007535. Authorized part. Oem part number 514007535. Fits various Porter Cable models. This is a Porter Cable replacement part. This is an o. E. M.More information #ad
| Brand | PORTER-CABLE #ad |
| Manufacturer | Porter-Cable Reconditioned #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Width | 1 Inches |
| Part Number | 514007535 |
| Model | 514007535 |
More information #ad
7. INCRA
#adINCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop
#adMore information #ad
Engraved stainless steel primary scale for precision accuracy. 18- to 31-inch telescoping incremental miter fence for handling a variety of stock widths.| Brand | INCRA #ad |
| Manufacturer | Incra #ad |
| Height | 4.5 Inches |
| Length | 18.25 Inches |
| Weight | 8.26 Pounds |
| Width | 18.25 Inches |
| Part Number | MITER1000/SE |
| Model | MITER1000SE |
| Warranty | 1 year replacement warranty |
More information #ad
8. VEVOR
#ad18" Aluminum Table Saw Miter Gauge w/ 60 Degree Angled Ends for Max. Stock Support and a Repetitive Cut Flip Stop, Miter Saw Fence w/Laser Marking Scale, VEVOR Precision Miter Gauge
#adIt also can be used for router tables and jointers. Laser marking technology is friction-resistance to ensure accuracy. Miter gauge fence system is currently a must-have for every family.
More information #ad
Additional trim blocks raises working efficiency. Wide application: the table saw miter can improve the safety and accuracy of the table saw and the router table. The miter gauges are flat without burr, and hands-free. Premium sturdy construction: this woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. Simple & secure operation: an adjusting screw and guide wheel are added in the middle, secure, which is more convenient to insert into the slot hole and fix the seat. The adjustable, 30, 22. 5, 45, solid aluminum head is machined with 11 positive stop holes. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 60 and 90 degrees.
| Brand | VEVOR #ad |
| Manufacturer | VEVOR #ad |
| Height | 4.7 Inches |
| Length | 22.4 Inches |
| Weight | 4 Pounds |
| Width | 5.1 Inches |
| Part Number | 18 inch Miter Gauge |
| Model | 18 inch Miter Saw Fence |
More information #ad
9. Saycker
#adBand Saws, JointersBlack, Table Saw Miter Gauge with Aluminum Miter Fence,Both Sides 60 Angle Adjustable,Be Used for Table Saws, Router Tables
#adMiter gauge fence system is currently a must-have for every family. Easy to use: both sides 60 angle adjustable, loosen the knob to quickly adjust the angle, Ideal for cross-cutting wood at a specific angle.
More information #ad
Increase the leveling baffle: Increase the touch area with the material, and push the material more stably. Feature: our aluminum miter fence is made from one, solid piece of extruded aluminum. On the back, there is an offset track for mounting the fence to a miter gauge.| Brand | Saycker #ad |
| Manufacturer | Saycker #ad |
| Height | 0.16 Inches |
| Length | 10.24 Inches |
| Weight | 0.26 Pounds |
| Width | 4.33 Inches |
| Part Number | 16298806706008 |
More information #ad
10. RYOBI
#adGenuine Ryobi 089037007707 Miter Gauge Assembly Fits RTS10
#adRYOBI #ad - Ass'y miter gauge. Ryobi part # 089037007707. Always check owners manual For Proper Part number. Compatible with :ryobi RTS10 10 Inch Table Saw.More information #ad
| Brand | RYOBI #ad |
| Manufacturer | Ryobi Power Tool #ad |
| Height | 3.5 Inches |
| Length | 10.5 Inches |
| Weight | 9 Pounds |
| Width | 10.5 Inches |
| Part Number | 89037007707 |
| Model | 89037007707 |
More information #ad
