Top 10 Leecraft CR-1 Zero Clearance Table Saw Insert – Table Saw Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Leecraft

#ad

Leecraft CR-1 Zero Clearance Table Saw Insert For Craftsman/SearsColors May Vary

#adLeecraft #ad - Fits: sears craftsman 10" belt-drive models 1977 to mid 2004 check size, RIDGID TS2412, see DL-1U, TS2424, TS2400. Elimantes dangerous gap around blade where thin off-cuts can get wedged. Measures: 14" x 3-3/4" x 3/16" please measure before ORDERING. Please note: cr-1 does not fit models ts2400ls, tS2400-1 or the new TS2410 See RG-2. Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering.

Brand	Leecraft #ad
Manufacturer	Leecraft #ad
Height	0.7 Inches
Length	3.75 Inches
Weight	1 Pounds
Width	14.35 Inches
Part Number	CR1L
Model	CR-1

2. Leecraft

#ad

Leecraft CR-3 Sears Vintage 10-Inch Belt-drive Zero Clearance Table Saw Insert

#adLeecraft #ad - Greatly reduced chip-out and splintering. Elimantes dangerous gap around blade where thin off-cuts can get wedged. Supports work right up to the blade.

Brand	Leecraft #ad
Manufacturer	Leecraft #ad
Height	1 Inches
Length	14 Inches
Weight	0.95 Pounds
Width	4 Inches
Part Number	CR-3
Model	CR-3

3. Leecraft

#ad

Leecraft PM-1 Zero Clearance Table Saw Insert For Powermatic Model 66

#adLeecraft #ad - Reduces saw noise. Kerf serves as handy stock alignment guide. Reduces sawdust expelled. Supports work right up to the blade. Reduced chip-out and splintering.

Brand	Leecraft #ad
Manufacturer	Leecraft #ad
Height	0.5 Inches
Length	14.44 Inches
Weight	1.23 Pounds
Width	4 Inches
Part Number	PM-1
Model	PM-1

4. Leecraft

#ad

Leecraft RG-1 Zero Clearance Table Saw Insert for Ridgid TS3650 Table Saw

#adLeecraft #ad - Made from high-density phenolic laminate with a bonded-melamine surface. Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering. Table saw insert supports work right up to the blade for smooth, more precise cuts. Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts. Leecraft's lifetime warranty; designed for Rigid table saw with carbide-tipped blades only.

Brand	Leecraft #ad
Manufacturer	Leecraft #ad
Height	1 Inches
Length	14 Inches
Weight	1.22 Pounds
Width	3.8 Inches
Part Number	RG-1
Model	RG-1

5. Leecraft

#ad

Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746

#adLeecraft #ad - Table saw insert for eWalt DW744 and DW746. Significantly reduces saw noise, dust, chip-out, and splintering. Constructed of high-density phenolic laminate with a bonded-melamine surface. Measures 13-5/8-by-3-3/4 inches LxW. User-friendly with leveling and lateral adjustment screws, rear anti-life pin, and precut blade bottom pocket.

Brand	Leecraft #ad
Manufacturer	Leecraft #ad
Height	13.85 Inches
Length	4.35 Inches
Weight	1.2 Pounds
Width	13.85 Inches
Part Number	DW-2
Model	DW-2

6. Leecraft

#ad

Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw Colors may Vary

#adLeecraft #ad - Fits: delta: unisaw & left-tilt unisaw, sears craftsman 22104, 10" contractor, 35675, powermatic 63, bridgewood bw10ts, "hybrid" & Left-Tilt Contractor, jet ctas-10, 35610, grizzly G1023, 22114, steel city 35605, 35680, 22124, 10" tilt arbor saw, 35670, 35685.

Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering. Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts. Measures: 13-3/8" x 3-3/4" x 1/2" Please measure before ordering. Elimantes dangerous gap around blade where thin off-cuts can get wedged.

Brand	Leecraft #ad
Manufacturer	Leecraft #ad
Height	3 Inches
Length	8 Inches
Weight	1.15 Pounds
Width	3 Inches
Part Number	DL-1U
Model	DL-1U

7. Leecraft

#ad

LEECRAFT RIDGID R4512 Table Saw Zero-Clearance Blade Insert

#adLeecraft #ad - Zero-clearance blade insert with riving knife slot. 15-1/8" x 3-3/4" x 1/8". Durable phelnolic construction. Fits ridgid r4512 professional Table Saw. Coated surface for friction free operation.

Brand	Leecraft #ad
Manufacturer	Leecraft #ad
Height	3 Inches
Length	8 Inches
Weight	1.09 Pounds
Width	3 Inches
Part Number	RG-5
Model	.

8. Leecraft

#ad

Leecraft Craftsman 21833 Table Saw Zero-Clearance Insert CR-4

#adLeecraft #ad - Leecraft model number CR-4. 15-1/8" x 4" x 1/8" thick with pre-milled blade, dado and riving knife slot. Precision machined from melamine faced high density phenolic laminate. Fits craftsman 21833, grizzly g0715p, dayton 4KXD1, Masterforce 240-0036 table saws. Installation instructions included.

Brand	Leecraft #ad
Manufacturer	Leecraft #ad
Height	1.05 Inches
Length	15.15 Inches
Weight	1.24 Pounds
Width	4.2 Inches
Part Number	21833

9. Leecraft

#ad

LEECRAFT RIDGID R4512 Table Saw Zero-Clearance Dado Insert

#adLeecraft #ad - Fits ridgid r4512 professional Table Saw. Durable phenolic construction. Coated surface for friction free operation. 15-1/8" x 3-3/4" x 1/8". Zero-clearance dado insert with no riving knife slot.

Brand	Leecraft #ad
Manufacturer	Leecraft #ad
Height	1.1 Inches
Length	15.5 Inches
Weight	1.04 Pounds
Width	4.7 Inches
Part Number	RG-6
Model	.

10. Leecraft

#ad

Leecraft PM7 Zero Clearance Table Saw Dado Insert for Powermatic 2000 Colors May Vary

#adLeecraft #ad - Eliminates dangerous gap around blade where thin off-cuts can get wedged. Installation instructions included. Fits: powermatic pm2000 - does noT fit the new Powermatic 2000B table saw. Measures: 17-7/8" x 4-1/4" x 15/32" - 3/8" Please measure before ordering. Offers superior rigidity, durability, flatness, and low friction; reduces chip-out and splintering.

Brand	Leecraft #ad
Manufacturer	Leecraft #ad
Height	0.8 Inches
Length	18.6 Inches
Weight	1.5 Pounds
Width	4.8 Inches
Part Number	PM-7
Model	.