Top 10 Jeld Wen Window Crank – Window Locks & Latches

As an Amazon Associate I earn from qualifying purchases.

1. PRIME-LINE

#ad

Prime-Line TH 24086 Entrygard Nesting Operator Cover and Crank, White

#adPRIME-LINE #ad - Use this cover and handle with casement and awning operators that have 5/16 in. Engineered to resist rust and corrosion. The operator cover is constructed of molded plastic, and the crank handle of diecast zinc. Inward, but folds and nestles down to a low profile. Both the operator crank handle and cover are easy to install. The unfolded opened crank handle extends a total of 5 in. Diameter splines. The window crank features a set screw at the base of the handle allowing it to lock onto the spindle.

Brand	PRIME-LINE #ad
Manufacturer	Prime-Line Products #ad
Height	4.12 Inches
Length	5.5 Inches
Width	4.88 Inches
Part Number	TH 24086
Model	TH 24086
Warranty	Goods are warranted against manufacturing defects for 1 year. In no case is prime-line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

2. PRIME-LINE

#ad

Diecast and Plastic, 11/32 inch, Bronze, Prime-Line TH 24087 Operator Cover and Nested Folding Handle

#adPRIME-LINE #ad - Engineered to resist rust and corrosion. The operator cover is constructed of molded plastic, and the crank handle of diecast zinc. The unfolded opened crank handle extends a total of 5 in. Use this cover and handle with casement and awning operators that have 5/16 in. The window crank features a set screw at the base of the handle allowing it to lock onto the spindle. Diameter splines. Both the operator crank handle and cover are easy to install. Inward, but folds and nestles down to a low profile.

Brand	PRIME-LINE #ad
Manufacturer	Prime-Line Products #ad
Height	4.12 Inches
Length	5.5 Inches
Width	4.88 Inches
Part Number	TH 24087
Model	TH 24087
Warranty	Goods are warranted against manufacturing defects for 1 year. In no case is prime-line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

3. CR Laurence

#ad

Left Hand Folding Handle and Cover, Truth EP27033 Encore White

#adCR Laurence #ad - Please check and verify which hand you need before purchasing. This is a left handed handle for truth brand.

Brand	CR Laurence #ad
Manufacturer	CR Laurence #ad
Part Number	EP27033

4. PRIME-LINE

#ad

1 Handle, Prime-Line TH 22253 – Folding Crank Handle for 11/32” Spindle Casement and Awning Window Operators – Low-Profile Design for Unobstructed Use of Blinds– Diecast Zinc, White Enamel Finish

#adPRIME-LINE #ad - For further dimensional information, please see the line drawing. It has a 2-9/64” reach with a 3-3/32” projection. Uses less torque – the th 22253 crank features a set screw at the base of the handle allowing it to lock onto the spindle, and a swivel knob at the tip for ease of operation.

Low-profile design – the unique design of the casement and awning window crank allows it to fold down when not in use, making it exceptionally low-profile. Shades, blinds, shutters and more can go straight down to the window sill without getting caught on the handle. It is engineered to resist rust and corrosion. Corrosion-resistant – prime-line window operator folding crank is constructed of diecast zinc with a baked-on white enamel finish.

Fits 11/32” spindles – prime-line folding crank handle is designed to fit 11/32” Truth brand operator spindles. For all dimensional information please refer to the line art and compare to your needs before purchasing. It requires far less torque than traditional low-profile handles. Easy to install – the non-handed window operator folding crank is extremely easy to install and all mounting hardware is included. Non-handed mounting.

Brand	PRIME-LINE #ad
Manufacturer	Prime-Line Products #ad
Height	5.88 Inches
Length	1.75 Inches
Width	4.88 Inches
Part Number	TH 22253
Model	TH 22253
Warranty	Goods are warranted against manufacturing defects for 1 year. In no case is prime-line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

5. Calvin Klein

#ad

Link # 20755 55051, Truth Casement Crank Operator, Left Hand, Short Link

#adCalvin Klein #ad - Left hand when viewed from outside, hinge is on the left. Link measures: 3-3/4", link is OFFSET - UP. Most commonly used on Caradco and Norco Windows. Short link. Markings on link: 20755 this is NOT for part #20810! .

Brand	Calvin Klein #ad
Manufacturer	Truth #ad

6. PRIME-LINE

#ad

White, Prime-Line H 3962 Universal, Folding Crank Handle for Casement Windows, Diecast

#adPRIME-LINE #ad - Universal fit with set screw. Constructed of steel and comes in a white finish. Easy to install. Note: the metal, universal insert is being replaced by a selection of plastic adapters – this should allow for a more secure fit in some cases. Align the adapter with the set screw on the handle and pass the screw through the hole and set directly on metal spindle shaft. Fits any spline size.

Brand	PRIME-LINE #ad
Manufacturer	Prime-Line Products #ad
Height	2.75 Inches
Length	1.62 Inches
Weight	0.17 Pounds
Width	3.81 Inches
Part Number	FBA_H 3962
Model	H 3962
Warranty	Goods are warranted against manufacturing defects for 1 year. In no case is prime-line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

7. HauSun

#ad

Reversible DesignNon-Handed, Sliding Patio Door Handle Set with Key Cylinder and Mortise Lock, Full Replacement Handle Lock Set Fits Door Thickness from 1-1/2" to 1-3/4"，3-15/16” Screw Hole Spacing

#adHauSun #ad - Standard reversible, non-handed handle set that can be mounted on both left-handed and right-handed sliding patio doors. Reversible door handle & mortise lock:also known as "non-handed”. Our handle is designed for right or left-handed or the door that opens from the left or the right, YOUR CHOICE! Comes with sliding door latch replacement.

For handles with 3-15/16” hole spacing & a mortise latching style lock. Includes: interior handle, mortise lock, exterior pull with key cylinder, thumb latch, 6xscrews. Includes 6 screws with 3 different sizes: Large 2. 16", insert screws, Medium 1. 96", insert Latch, Small 1. 57". Easy installation:this is a diy project in the box. Remove 2 screws from existing handles, align inside and outside handles with Pre-drilled door holes, tighten and your done. Cost effective to replace old or broken door handles: when your door handle is broken, don’t replace the door entirely, old or unsightly, just get a new sliding patio door handle set! Our whole set replacement patio door handle + mortise patio door / sliding door lock with key is the most economical and useful you can find.

Keyed:the exterior die-cast pull comes with keyed cylinder. 45° mortise latch lock which can be used on sliding patio doors constructed of wood, aluminum and vinyl. The exterior pull has key cylinder in it and you can lock the door from outside.

Brand	HauSun #ad
Manufacturer	Wintek #ad
Height	0.04 Inches
Length	15.75 Inches
Weight	1.1 Pounds
Width	14.96 Inches

8. PRIME-LINE

#ad

Stone, Smooth 360-Degree Operation, PRIME-LINE Products H 3966 Spline Socket Crank Handle

#adPRIME-LINE #ad - It has a smooth 360-degree operation that allows you to easily open and close windows as needed. Prime-line’s commitment to quality results in repairs which look as good as the initial install, making us the go-to solution for our loyal customers.

Installation – a phillips head screwdriver will be required for the easy slip-on installation. The 3/8-inch bore is held firmly in place with the supplied set screw. Diecast construction – this window crank features a durable diecast construction with a stone finish. Compatibility – this prime-line casement crank window Handle can be use on 3/8-inch spindles, including on most older Anderson casement operators.

Casement crank handle – the h 3966 casement window crank handle from prime-line features 3/8-inch bore and a 3-1/8-inch reach. Prime-line grade – we specialize in repair and replacement hardware products for your home.

Brand	PRIME-LINE #ad
Manufacturer	Prime-Line Products #ad
Height	3.12 Inches
Length	1.13 Inches
Weight	0.1 Pounds
Width	3.81 Inches
Part Number	H 3966
Model	H 3966
Warranty	1 year limited.

9. Park Ridge Products

#ad

32" x 14", White, Park Ridge Products VBSI3214PR Window

#adPark Ridge Products #ad - Insulated glass and durable wool pile seals Keep cold air out and warm air in. Park ridge products basement slider window is manufactured with a heavy duty extruded welded vinyl sash and main Frame. Included is an easily removable Full screen to Keep insects out. This is an aftermarket of generic part. Park ridge products basement slider window is the perfect choice for your new construction or remodeling needs. The sash glides effortlessly, interlocking with the main Frame ensuring a weather tight seal.

Brand	Park Ridge Products #ad
Manufacturer	Tafco #ad
Height	13.75 Inches
Length	31.75 Inches
Weight	15 Pounds
Width	2.75 Inches
Part Number	VBSI3214PR
Model	VBSI3214PR
Warranty	Limited Lifetime

10. Essential Values

#ad

Patio Door Handle Set, Sliding Door Handle Set Non-Keyed | 2-Handle White Diecast Replacement for Sliding Doors | 3-15/16” Hole Spacing for Mortise Style Locks

#adEssential Values #ad - For handles with 3-15/16” hole spacing and a mortise latching style lock. Installation made easy - this is a diy project in the bag. Updated version - fixed screw threading issue sept 2018. Includes 6 screws with 3 Different Sizes: Large 2. 16", align inside and outside Handles With Pre-Drilled Door Holes, Small 1.

57". Updated version - fixed screw threading issue sept 2018. Our patio door handle sets can't be beat, You WILL NOT Find A Similar Set For Less. Reversible door handle - also known as "non-handed. Attention: The exterior diecast pull is non-keyed. Our patio door handle sets can't be beat, You WILL NOT Find A Similar Set For Less. Remove 2 screws from existing Handles, Insert Screws, Insert Latch, Medium 1.96", tighten And Your Done. Our handle is design for right or left handed or the door that opens from the left or the Right, YOUR CHOICE! Cost effective & elegant design with non-keyed function - why pay more? our die-cast metal white finish design goes great with your white door or can create a pop for any other colored Door.

This handle is not convertible with key function at this time! adjustable latch - some doors are sleeker and thinner, we offer an Adjustable/Modifiable Latch To Save You That Extra Trip Back To The Hardware Store. Just trim off that Excess Length If Necessary.

Brand	Essential Values #ad
Manufacturer	Essential Values #ad
Height	3 Inches
Length	8 Inches
Weight	0.66 Pounds
Width	2 Inches
Part Number	43239-172015