Top 10 Huanyang VFD 2.2KW – Power Spindle Sanders

As an Amazon Associate I earn from qualifying purchases.

1. HY HUANYANG

#ad

VFD 220V 2.2KW 3hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series2.2KW, 220V

#ad
HY HUANYANG #ad - You can just connected l1/l2 to any two of vfd input r/s/t. And. Work well with the mach 3 controllerIt can be used as a motor speed control and a phase converter. This item use sine wave PWNSPWM for the control system.

Important note: ●this vfd is only applicable to three phase asynchronous motor●dont support external resistorthe function needs to be customized by notifying the seller before purchase. Fan runs all the time even though the motor stop. If your motor is 50/60hz, you need to change the Hertz parameter of the VFD to be consistent with the motor. 0-400hz.

Input:1 or 3 phase 220v. If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD. Output:3phase 220v. If there are problems in use after you receive, please don't give us negative or natural feedback. Please contact us as soon as possible, we will help you solve problems or help you replace new one. Frequency:0-50hz/60hz.
BrandHY HUANYANG #ad
ManufacturerHuanyang Electrical #ad
Height6.3 Inches
Length6.7 Inches
Width5.1 Inches
Part NumberHY02D223B
ModelHY02D223B

2. Huanyang

#ad

Water Cooled CNC Spindle Milling Motor 220V 2.2KW 24000RPM 400hz ER20 Collet HUANYANG CNC VFD Motor Factory Direct Sales

#ad
Huanyang #ad - Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding. The item is water cooled 220v-2. 2kw 3 bearings Φ80mm spindle motor. Come with a 6mm collet. Operating speed:6000rpm-24000rpm. Lubricated with grease, which is resistant to 200 degrees high temperature. The bearing adopts high speed angular contact bearing. And shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.
BrandHuanyang #ad
ManufacturerHuanyang Electrical #ad
Part NumberGDZ-80-2.2B

3. HY HUANYANG

#ad

VFD CNC Spindle Motor Kits:110V 2.2KW VFD+110V 2.2KW 4 bearings Water Cooled Spindle Motor+110V 75W Water Pump+80mm Motor Clamp Mount+5m Water Pipe 110V-2.2KW VFD 2.2kw 4 bearings motor

#ad
HY HUANYANG #ad - If there are problems in use after you receive, please don't give us negative or natural feedback. Please contact us as soon as possible, we will help you solve problems or help you replace new part. It can be used as a motor speed control and a phase converter.

This item use sine wave PWNSPWM for the control system. Work well with the Mach 3 controller. This vfd can be used for constant torque loads such as hard starting: air compressors, fans, HVAC units and variable torque loads such as pumps, etc. Note:spindle need to be equipped with this vfd to use. Rated frequency of spindle is 400 hz, if you input 110v voltage at 50hz or 60hz, it will damage the spindle and vfd DOES NOT support external resistor.

Fan runs all the time even though the motor isn't fan functions need to be customized. The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine, CNC machine, small sized processing center, high speed centrifuge etc. This package includes: 1 x 110v-2. 2kw vfd, 1 x 110v-2. 2kw Φ80mm 4bearings 24000rpm er20 collet water cooled Spindle Motor, 1 x 110V-75W Water Pump. 1 x 80mm motor clamp mount 1 x 5m Water Pipe.
BrandHY HUANYANG #ad
ManufacturerHuanyang Electrical #ad

4. HY HUANYANG

#ad

Huanyang CNC VFD Variable Frequenc Drive Controller 110v Input 220v Output 2.2kw 3hp Inverter for Motor Speed Control

#ad
HY HUANYANG #ad - Rising voltage series, 110v single phase phase input, 220v three phase output. This drive is very suitable for high-speed rotating motors, such as spindle motor, engraving machine CNC.

And can be used as a motor speed control and a phase converter. Work well with the Mach 3 controller. The input is1 phase. This item use sine wave PWNSPWM for the control system. Important note: this vfd is applicable to three phase motor and NOT support external resistor. Fan runs all the time even though the motor isn't fan functions need to be customized. The vfd only supports light load motor. This vfd can be used for constant torque loads such as hard starting: Air compressors, fans, HVAC units and variable torque loads such as pumps, etc.
BrandHY HUANYANG #ad
ManufacturerHuanyang Electrical #ad
Height5.9 Inches
Length8.7 Inches
Width6.7 Inches

5. HY HUANYANG

#ad

Huanyang VFD CNC Variable Frequency Drive Converter Controller 1 phase 220v input 380v 3 phase output 2.2kw 3hp Inverter for Motor Speed Control

#ad
HY HUANYANG #ad - Important note: this vfd is applicable to three phase motor and NOT support external resistor. Fan runs all the time even though the motor isn't fan functions need to be customized. The vfd only supports light load motor.

This vfd can be used for constant torque loads such as hard starting: air compressors, HVAC units and variable torque loads such as pumps, fans, etc. The input is 1 phase. This item use sine wave PWNSPWM for the control system. It is designed which also could use USA 60hz single phase input. Application: spindle motor. Cnc router, ventilator, drilling machine, elevator, mixer, winder, pump, cnc machine, slitter, conveyor, milling machine, wingding machine, extruder, compressor, grinder, centrifuger and other speed control machines.

This drive is very suitable for high-speed rotating motors, such as spindle motor, engraving machine CNC. And can be used as a motor speed control and a phase converter. Work well with the Mach 3 controller. Rising voltage series, 220v single phase phase input, 380v three phase output.
BrandHY HUANYANG #ad
ManufacturerHuanyang Electrical #ad
Height5.9 Inches
Length8.7 Inches
Width6.7 Inches
Part NumberHY04D223B-T

6. RATTMMOTOR

#ad

2.2KW 220V VFD CNC Spindle Motor Speed Control Variable Frequency Drive 1HP or 3HP Input 3HP Frequency Inverter

#ad
RATTMMOTOR #ad - Auto voltage regulation avr technique, for ensuring the inverter load capability. With perfect error protection and short circuit starting protection capability. Pid control; advanced calculus pid closed-loop arithmetic, quick responding speed and high suitability. Our inverter is only suitable for CNC spindle motors, other motors are not suitable. Low output ratting torque05hz-150%, low speed running ability. Easy plc function can realize 16 legs of speed and inverter control function. Our inverter vfd, can be only used for 3 Phase motors 220V, can't support Normal single motors.
BrandRATTMMOTOR #ad
ManufacturerHuangyang #ad
Weight3.86 Pounds
Part NumberHY02D223B

7. HY HUANYANG

#ad

VFD CNC Spindle Motor Kits:220V 2.2KW CNC VFD+220V 2.2KW 4bearings 400hz 24000rpm Water Cooled Spindle Motor+220V 75W Water Pump+80mm Motor Clamp Mount+5m Water Pipe Factory Direct Sales

#ad
HY HUANYANG #ad - It can be used as a motor speed control and a phase converter. This item use sine wave PWNSPWM for the control system. Work well with the Mach 3 controller. This package includes: 1 x 220v-2. 2kw vfd, 1 x 220v-2. 2kw Φ80mm 4bearings 24000rpm er20 collet water cooled Spindle Motor, 1 x 220V-75W Water Pump.

1 x 80mm motor clamp mount 1 x 5m Water Pipe. If there are problems in use after you receive, please don't give us negative or natural feedback. Please contact us as soon as possible, we will help you solve problems or help you replace new part. This vfd can be used for constant torque loads such as hard starting: air compressors, HVAC units and variable torque loads such as pumps, fans, etc.

The spindle motor applied to: wood carving/engraving machine, small sized processing center, advertisement engraving machine, CNC machine, high speed centrifuge etc. Note:spindle need to be equipped with this vfd to use. Rated frequency of spindle is 400 hz, if you input 220v voltage at 50hz or 60hz, it will damage the spindle and vfd DOES NOT support external resistor. Fan runs all the time even though the motor isn't fan functions need to be customized.
BrandHY HUANYANG #ad
ManufacturerHUANYANG ELECTRICAL #ad

8. RATTMMOTOR

#ad

CNC 2.2KW Spindle Motor Speed Control 110V Variable Frequency Drive VFD 1HP or 3HP Input 3HP Frequency Inverter for CNC Router Milling Machines

#ad
RATTMMOTOR #ad - Easy plc function can realize 16 legs of speed and inverter control function. Our inverter vfd, can be only used for 3 Phase motors 110V, can't support Normal single motors. With perfect error protection and short circuit starting protection capability. Pid control, advanced calculus pid closed-loop arithmetic, quick responding speed and high suitability. Low output ratting torque 05hz-150%, low speed running ability. Auto voltage regulation avr technique, for ensuring the inverter load capability. Our inverter is only suitable for CNC spindle motors, other motors are not suitable.
BrandRATTMMOTOR #ad
ManufacturerHuanyang #ad
Part NumberHY02D211B

9. HY HUANYANG

#ad

110V, VFD 110V Input 2.2KW 3hp Variable Frequency CNC Drive Inverter Converter for 3 Phase Motor Speed Control 2.2KW

#ad
HY HUANYANG #ad - You can just connected l1/l2 to any two of vfd input r/s/t. And. Work well with the mach 3 controllerIt can be used as a motor speed control and a phase converter. This item use sine wave PWNSPWM for the control system.

Frequency:0-50hz/60hz. If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD. 0-400hz. Input:1 or 3 phase 110v. If there are problems in use after you receive, please don't give us negative or natural feedback. Please contact us as soon as possible, we will help you solve problems or help you replace new one.

Output:3phase 110v. Important note: ●this vfd is only applicable to three phase 110v asynchronous motor●dont support external resistorthe function needs to be customized by notifying the seller before purchase. Fan runs all the time even though the motor stop. If your motor is 50/60hz, you need to change the Hertz parameter of the VFD to be consistent with the motor.
BrandHY HUANYANG #ad
ManufacturerHuanyang Electrical #ad
Height6.3 Inches
Length6.7 Inches
Width5.1 Inches
Part NumberHY02D211B
ModelHY02D211B

10. Huanyang

#ad

Huanyang Water Cooled CNC Spindle Milling Motor 110V 2.2KW 24000RPM 400hz ER20 Collet for Engraving Machine

#ad
Huanyang #ad - The item is water cooled 110v-2. 2kw 4 bearings Φ80mm 400hz spindle motorcome with a 6mm collet. Operating speed:6000rpm-24000rpm. Note:need to be equipped with frequency converter to use. Rated frequency of spindle is 400 hz, If you input 220v voltage at 50hz or 60hz, it will damage the spindle. Stable performance, high precision bearing. Application:wood carving/engraving machine, small sized processing center, CNC machine, advertisement engraving machine, high speed centrifuge etc.
BrandHuanyang #ad
ManufacturerHuanyang Electrical #ad