Top 10 Honing Guide Jig for Wood Chisel Edge Sharpening – Sharpening Stones

As an Amazon Associate I earn from qualifying purchases.

1. CARTLIFE

#ad

CartLife Honing Guide Jig for Wood Chisel Edge Sharpening Holder,Fixed Angle Knife Sharpener,Clamping Planer Blade,Graver,Flat Chisel Hand Tool Chisels 1/8" to 1-7/8”,Planer Blades 1-3/8"

#ad
CARTLIFE #ad - Includes flat jaws for clamping mortise chisels, and grooved jaws for clamping paring chisels and planer blades. Totally coated with anti-rust paint, not easy to rust, lasting and durable. Adjustable clamping widthadjust the clamping width by rotating the screw-cap. This sharpening guide will fit chisels from 1/8" to 1-7/8" in width, and plane irons from 1-3/8" to 3-1/8" in width.

Sturdinless constructurethe cartlife honing guide jigs used a hardened carbon steel roller wheel which will not wear down over time or develop flat spots. The body of chisel sharpener is made from durable cast aluminum. Easy to use / methodhoning jigs seems simple to use, however maybe you are confused in the first time. So please kindly read the instruction step by step when you open the box, then get the perfect edge each time.

Multipurpose toolsthe cartlife honing guide can be used for wood Chisel, Blade, Plane Iron, Graving Knife, Graver, Planer, Flat Chisel, Edge Sharpening. Accurately setting anglesharpening angles can be accurated to set using cartlife's sharpening jig by adjusting the tool projection. More angles, kindly refer the instruction in the package. If chisel projection 30mm for 30° and 40mm for 25° angles, planeiron projection 38mm for 30° and 50mm for 25° angles. And easy-to-use works on both oilstones and waterstones.
BrandCARTLIFE #ad
ManufacturerCartLife #ad
Height1.57 Inches
Length4.33 Inches
Weight0.54 Pounds
Width1.57 Inches

2. HAO-1

#ad

Honing Guide Jig for Wood Chisel Edge Sharpening Holder,Fixed Angle Knife Sharpener,Graver,Flat Chisel Hand Tool Stone01

#ad
HAO-1 #ad - Multipurpose tools: this honing guide can be used for wood Chisel, Carving Knife, Graver, Plane Iron, Blade, Planer, Flat Chisel Edge Sharpening. Helping you to be a better handicraftsman.

Then tighten the screw cap clockwise, blade edge is smoothly fitted to the whetstone or sharpening stones, slide the knife back and forth until your tools becomes sharper and more precise. When sharpening the knife, and the angle is easy to grasp, the blade edge is smoothly fitted to the oil stone, the center of gravity is stable, and it is not easy to slip.

Brass pulley, sliding back and forth during grinding is not limited, keeping the direction consistent, and the slip is smooth and safe. Support chisel max clamping width to 55mm, Support plane iron max clamping width to 80mm. How to use: turn the screw cap counterclockwise, clamp your chisel or other knife tools, move up and down to adjust freely blade angle.
BrandHAO-1 #ad
ManufacturerHAO-1 #ad
Part NumberHAO-1

3. Baitaihem

#ad

Baitaihem Stainless Steel Honing Guide, Chisel Blades Width 0.35" To 2.1", Fits Planer Width 1.4" To 3.1"

#ad
Baitaihem #ad - Brass and stainless steel roller design, give you more choice, and make move back and forth without restriction during sharpening. Suitable wood chisel, blade, carving knife, planer, plane iron, graver, flat chisel edge sharpening. Keep the same direction, anti-slip, smooth and safe. Two sections to use, fits chisels width 015 inch- 2. 1 inch, planer width 1. 4 inch - 3. 1 inch.
BrandBaitaihem #ad
ManufacturerBaitaihem #ad
Part NumberMT0079

4. WoodWould

#ad

Honing Guide Jig for Chisel Honing Planer Blade Graver Iron Edge Sharpening Woodworking Bevel Angle Sharpener Abrasive Tools

#ad
WoodWould #ad - Note: please carefully check all the product information to make sure this is the right one you want before placing your order. Suit for: wood chisel, carving knife, graver, planer, plane iron, blade, flat chisel edge sharpening. Use: to adjust the blade angel. Feature: made of high quality stainless steel, no rusting and durable in use. Extension: you can adjust clamping width by rotating the screw-cap, clamping width range is from 8~80mm031~3. 1".
BrandWoodWould #ad
ManufacturerWoodWould #ad

5. Ram-Pro

#ad

Ram-Pro Honing Guide for Chisel Edge Sharpening Aluminum Alloy Fixed Angle Side Clamping with Roller Ring Clamping Planer Blade Jig for Wood Chisel Planer Blade Graver Flat Chisel Hand Tool

#ad
Ram-Pro #ad - Adjustable screw Design plus twin chrome slides, vice jaws keep blade perpendicular to honing stone. Can be widely used for chisel, Carving Knife Sharpening. Extend wood chisels and planer irons lives with new perfect edge. The body of the chisel sharpener is crafted from durable cast aluminum.

Get better-than-factory cutting edge for improved woodworking results - with less effort. Uses: fit for wood chisel, planer iron, simple to use. Specifications: self centering and fully adjustable, and plane irons from 1-3/8” to 3-1/8” in width. Move guide up/down on blade to increase/decrease angle; ball-bearing roller wheel, Planer, graver, plane-iron, flat spade, Blade, Flat Chisel, and etc. Design: forget the days of trying to find the correct angle by hand or accidentally tapering the edge of your tools. Don't replace expensive chisels and planer irons - extend their lives with new perfect edge.

Chisel sharpening has never been so easy. Quality: the ram-pro honing tool features a hardened steel roller wheel which will not wear down over time or develop flat spots. Includes flat jaws for clamping mortise chisels, this sharpening guide will fit chisels from 1/8” to 1-7/8” in width, and grooved jaws for clamping paring chisels and planer blades. The ram-pro honing guide is an essential tool for chisel sharpening and planer blade sharpening used by woodworkers of any and all skill levels, from hobbyists to professionals.
BrandRam-Pro #ad
ManufacturerRam-Pro #ad
Part Number3791
Model3791

6. Aileenss

#ad

Fits Chisels 1/8” to 1-7/8”, Honing Guide Jig for Chisel Plane Blade Graver Edge Sharpening Wood Work Bevel Angle Sharpener Abrasive Tools, Fits Planer Blades 1-3/8” to 3-1/8”

#ad
Aileenss #ad - Includes flat jaws for clamping mortise chisels, and grooved jaws for clamping paring chisels and planer blades. Honing guide chisel sharpener with Brass roller is made from durable cast aluminum with wear-resistant roller, sturdinless constructure. No mater your are a hobbyists or professionals, wood carver, graving knife, plane iron, honing guide jig is a must tool that make your sharpening more easier and convenientThe honing guide can be used for wood, planer, chisel, blade, edge sharpening.

This sharpening guide will fit chisels from 1/8" to 1-7/8" in width, Support plane irone and adjustable clamping width, and plane irons from 1-3/8" to 3-1/8" in width. And easy-to-use works on both oilstones and waterstones. Self centering and fully adjustable, the most breadth of plane iron by rotating the screw-cap. If chisel projection 30mm for 30° and 40mm for 25° angles, planeiron projection 38mm for 30° and 50mm for 25° angles. An inexpensive tool for chisel sharpening and planer blade sharpening used by woodworkers, flat chisel, carpenter, graver, metalworker etc.

The honing guide is an essential tool for chisel sharpening and planer blade sharpening used by woodworkers of any and all skill levels, from hobbyists to professionals. You can trust that this sharpening tool will be around for the long haul, as the roller wheel is crafted of hardened steel which will never wear down or develop flat spots. Totally coated with anti-rust paint, sturdy and durable in use, hardened carbon steel roller wheel which will not wear down over time or develop flat spots, lasting and durable. Sharpening angles can be accurated to set using aileens's sharpening jig by adjusting the tool projection.
BrandAileenss #ad
ManufacturerAileenss #ad
Height1.3 Inches
Length3.5 Inches
Weight0.37 Pounds
Width1.6 Inches
Part NumberSHBlu1

7. Ram-Pro

#ad

RAM-PRO Honing Guide for Chisel Edge Sharpening, Planer Blade Jig

#ad
Ram-Pro #ad - Size-adjust screw plus twin chrome slides, vice jaws keep blade perpendicular to honing stone. Unique patented vice design fits planer irons 1-3/8" to 3-1/8", chisel blades to 1-7/8". Don't replace expensive chisels and planer irons - extend their lives with new perfect edge. Get better-than-factory cutting edge for improved woodworking results - with less effort. Move guide up/down on blade to increase/decrease angle; ball-bearing roller wheel, simple to use.
BrandRam-Pro #ad
ManufacturerMix N More Inc #ad
Weight0.55 Pounds
Part Number0385

8. FOLOU

#ad

FOLOU Honing Guide Jig for Wood Chisel Edge Sharpening Holder,Fixed Angle Knife Sharpener,Clamping Planer Blade,Graver,Flat Chisel Hand Tool Metal Side Clamping Fixed Angle Honing Guide for Wood

#ad
FOLOU #ad - Ideal for deburring, polishing and roughing wood, stone, deburring, shaping, and sharpening hand saws. Permanently covered with industrial diamonds to create hardest surface. Built for framers, carpenters, contractors, roofers, tradesmen etc. Material: t12 bearing steel + tPR Handle, TPR package plastic handle for comfortable usage experience. Overall treatment and quenching of file, with high durability. Perfect for processing, jewelry.
BrandFOLOU #ad
ManufacturerFOLOU #ad

9. Preamer

#ad

Preamer Honing System Guide Wood Plain & Chisel Sharpening Plane for Wood Chisel Edge Sharpening Holder,Fixed Angle Knife Sharpener,Clamping Planer Blade

#ad
Preamer #ad - Stainless steel honing Guide with Brass roller. Move guide up/down on blade to increase/decrease angle, Brass roller roller glides, simple to use.

This simple to use tool will securely hold wood chisels and plane irons at the correct angle to the stone, and ensures a true square edge. Extend wood chisels and planer irons lives with new perfect edge. Projection measurements for 25° and 30° angles are conveniently located on the packaging and on the cast aluminum body of the tool. Fits planer irons 1-3/8" to 3-1/4", chisel blades 5/16" to 2-1/4". All standard sharpening angles can be achieved using this sharpening jig by adjusting the tool projection. High Quality.
BrandPreamer #ad
ManufacturerPreamer #ad

10. ATLIN

#ad

Fits Chisels 1/8” to 1-7/8”, Fits Planer Blades 1-3/8” to 3-1/8”, ATLIN Honing Guide

#ad
ATLIN #ad - The body of the chisel sharpener is crafted from durable cast aluminum. Sizing & compatibility – self centering and fully adjustable, this sharpening guide will fit chisels from 1/8” to 1-7/8” in width, and plane irons from 1-3/8” to 3-1/8” in width. Instructions included – honing jigs can appear deceptively simple, however there is more to them than most people realize.

Chisel sharpening has never been so easy. Projection measurements for 25° and 30° angles are conveniently located on the packaging and on the cast aluminum body of the tool. Easily extend the life of your tools – forget the days of trying to find the correct angle by hand or accidentally tapering the edge of your tools. Built to last – the atlin honing tool features a hardened steel roller wheel which will not wear down over time or develop flat spots.

Included with your order are illustrated, step-by-step instructions which detail how to get the perfect edge every time. Includes flat jaws for clamping mortise chisels, and grooved jaws for clamping paring chisels and planer blades. Choose your own angle – all standard sharpening angles can be achieved using this sharpening jig by adjusting the tool projection. The atlin honing guide allows you to easily choose your desired sharpening angle, and consistently achieve the perfect edge on your tools.
BrandATLIN #ad
ManufacturerATLIN #ad
Height4.1 Inches
Length1.5 Inches
Weight0.55 Pounds
Width1.3 Inches
Part NumberWO1002A
ModelWO1002A