As an Amazon Associate I earn from qualifying purchases.
Kohler #ad - Includes bolts, washers, gaskets, nuts and screws. Kohler genuiNE Part. For most two-piece toilets. Gaskets are made with superior material to ensure a proper seal.
Kohler #ad - Optimizes toilet flushing performance. Flush valve assembly for Wellworth, Highline and various other KOHLER toilets. Includes flush valve, 2" flapper, triangle gasket and bolts. Replaces black flush valve with red flapper. Also replaces part number 84246. Kohler genuine part.
Kohler #ad - Replaces red seal. After four generations, Kohler remains a family owned company. Seal for single flush canister toilets. Chemical resistant and designed to withstand wear. Protect the on kohler products, always look for the Kohler genuine parts logo.
Kohler #ad - Valve Type: Manual. Confirm shank color to determine correct part; If black, use this part and if grey, use GP1138930 Never use an abrasive material such as a brush or scouring pad to clean surfaces.
Kohler #ad - 3 inches canister with a 3 inches outlet. Inlet diameter: 05 inches. Material: Plastic. Canister flush valve kit for Kohler Cimarron toilets. Compatible with kohler Cimarron tank model number K 4634.
Impresa Products #ad - Outer diameter of 3 3/8". No one wants a loud or hard to flush toilet! Works on kohlers with flush valve: compatible with all Kohler toilets with a canister flush valve. Perfect replacement for your kohler k-gp1059291 canister flush valve Seal red or yellow color.
Create a stronger flush: toilet gasket seals wear out over time and need to be replaced - replacement creates better flushing pressure and results in a quieter toilet.
Equivalent to part k-gp1059291 / 2475620 Pack of 2 for a great value! please note: this is an aftermarket replacement product produced by Impresa meeting or exceeding the quality of OEM rings based on in-house testing. 3 minute install: installation instructions for proper use below.
Kohler #ad - Corosion resistant. Compatible with the following kohler models: santa rosa 3323, gabrielle 3322, kathryn-3324, 14258, 11899, 14257, 14286, 3803, 14268 and other various models. Flush valve kit for gabrielle, Santa Rosa, and other KOHLER toilets.
Impresa Products #ad - Made from high-quality, durable rubber. Outer diameter of 3 3/8". 3 minute repair install: installation instructions for proper use below. No one wants a loud or hard to flush toilet! Works on kohlers with flush valve: compatible with all kohler tm / Kholer / Koehler toilet tanks with a canister flush valve.
High quality at a great value: made from a purpose-specific rubber blender, our 5-pack of parts provide top quality at an excellent value.
Please note: this is an aftermarket replacement product produced by Impresa meeting or exceeding the quality of OEM rings based on in-house testing. Creates a stronger flush: toilet gasket seals wear out over time and need to be replaced - replacement creates better flushing pressure and results in a quieter toilet. If you have any questions about fit, please ask a question below.
Kohler #ad - Note: this product is not a universal fit for all kohler toilets. Used with a 3 1/4" flush outlet. 3 1/4" gasket for toilets with drylock connection. Fits between tank and bowl.
1. Kohler
#adKOHLER GENUINE PART GP51487 TANK BOLT ASSEMBLY KIT
#adMore information #ad
| Brand | Kohler #ad |
| Manufacturer | KOHLER #ad |
| Height | 2.1 Inches |
| Length | 7 Inches |
| Weight | 0.4 Pounds |
| Width | 7.88 Inches |
| Part Number | B001H01K42 |
| Model | K-GP51487 |
More information #ad
2. Kohler
#adKOHLER GENUINE PART 85406 2" Toilet Flush Valve Kit,Assorted Colors
#adMore information #ad
| Brand | Kohler #ad |
| Manufacturer | KOHLER #ad |
| Height | 3 Inches |
| Length | 11 Inches |
| Weight | 0.54 Pounds |
| Width | 6.5 Inches |
| Part Number | 85406 |
| Model | 85406 |
More information #ad
3. Kohler
#adKohler Genuine Part Gp1059291 Canister Seal
#adMore information #ad
| Brand | Kohler #ad |
| Manufacturer | Kohler #ad |
| Height | 0.25 Inches |
| Length | 3 Inches |
| Weight | 0 Pounds |
| Width | 3 Inches |
| Part Number | K-GP1059291 |
| Model | GP1059291 |
More information #ad
4. Kohler
#adKohler Genuine Part Gp1083167 Silent Fill Valve Kit For All Kohler Class Five Toilets,12.5" x 3.5" x 3"
#adMore information #ad
Silent fill provides a gracious experience by filling the tank quietly. Kohler genuine part. Multiple fill rate inserts are provided to optimize performance and conserve water. Cap color may vary. Adjustable to accommodate any height.| Brand | Kohler #ad |
| Manufacturer | KOHLER #ad |
| Height | 3 Inches |
| Length | 11.75 Inches |
| Weight | 0.6 Pounds |
| Width | 3.75 Inches |
| Part Number | GP1083167 |
| Model | GP1083167 |
More information #ad
5. Kohler
#adKohler Genuine Part 1083980 3" Toilet Canister Flush Valve Kit, 2.50 x 1.50 x 9.00 inches
#adMore information #ad
Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and dry any overspray that lands on nearby surfaces. Complete assembly with tank to bowl gasket. Kohler genuine part. Look inside the back wall of the toilet tank to identify tank model number.| Brand | Kohler #ad |
| Manufacturer | Kohler #ad |
| Height | 10.88 Inches |
| Length | 5 Inches |
| Weight | 0.2 Pounds |
| Width | 5 Inches |
| Part Number | 1083980 |
| Model | 1083980 |
| Warranty | One-Year Limited Warranty |
More information #ad
6. Impresa Products
#ad2-Pack of Kohler-Compatible Canister Flush Valve Seal Replacements For Toilets Equivalent to K-GP1059291
#adCreate a stronger flush: toilet gasket seals wear out over time and need to be replaced - replacement creates better flushing pressure and results in a quieter toilet.
More information #ad
Made from high-quality, durable rubber. If you have any questions about fit, please ask a question below. Installation is simpler than you'd expect, and does not require you to remove the base of the toilet. Equivalent to part k-gp1059291 / 2475620 Pack of 2 for a great value! please note: this is an aftermarket replacement product produced by Impresa meeting or exceeding the quality of OEM rings based on in-house testing. 3 minute install: installation instructions for proper use below.
| Brand | Impresa Products #ad |
| Manufacturer | Impresa Products #ad |
| Height | 0.1 Inches |
| Length | 3.4 Inches |
| Weight | 0.04 Pounds |
| Width | 3.4 Inches |
| Part Number | FBA_IP44428 |
| Model | FBA_IP44428 |
More information #ad
7. Kohler
#adKOHLER GENUINE PART 87998 FLUSH VALVE KIT, Small
#adMore information #ad
| Brand | Kohler #ad |
| Manufacturer | KOHLER #ad |
| Height | 3.75 Inches |
| Length | 10 Inches |
| Weight | 0.44 Pounds |
| Width | 4.25 Inches |
| Part Number | 87998 |
| Model | 87998 |
More information #ad
8. Impresa Products
#adPerfect Replacement Parts for GP1049291 Tank Canister Gasket Kit, 5-Pack of Kohler -Compatible Canister Flush Valve Seal Replacements For Toilets Equivalent to K-GP1059291, By IMPRESA
#adHigh quality at a great value: made from a purpose-specific rubber blender, our 5-pack of parts provide top quality at an excellent value.
More information #ad
Equivalent to part / kit k - gp1059291 / 2475620 / 1049291. Perfect replacement for your kohler tm k-gp1059291 canister flush valve seal red or yellow color. Installation and assembly is simpler than you'd expect, and does not require you to remove the base of the toilet. Please note: this is an aftermarket replacement product produced by Impresa meeting or exceeding the quality of OEM rings based on in-house testing. Creates a stronger flush: toilet gasket seals wear out over time and need to be replaced - replacement creates better flushing pressure and results in a quieter toilet. If you have any questions about fit, please ask a question below.
| Brand | Impresa Products #ad |
| Manufacturer | Impresa Products #ad |
| Height | 0.5 Inches |
| Length | 4 Inches |
| Width | 4 Inches |
| Part Number | IP89291038744183 |
| Model | BHBUSAZIN025411 |
More information #ad
9. Kohler
#adKOHLER GENUINE PART 1188999 2" Toilet Canister Flush Valve Kit
#adKohler #ad - Look inside the back wall of the toilet tank to identify tank model number. The number printed on the canister is a component number, which is a component of this kit.More information #ad
Kohler genuine part. Compatible with kohler Cimarron tank model number K-4421. 3" canister with a 2" outlet harnesses the natural force of gravity and optimizes flush performance.| Brand | Kohler #ad |
| Manufacturer | Kohler #ad |
| Height | 5.75 Inches |
| Length | 5.5 Inches |
| Weight | 0.02 Pounds |
| Width | 14.35 Inches |
| Part Number | 1188999 |
| Model | 1188999 |
More information #ad
10. Kohler
#ad3 In., KOHLER GENUINE PART GP1018165-F TANK GASKET FOR DRYLOCK CONNECTION,Black
#adMore information #ad
Tank model number can be found in the inside back of the tank. This product is for the following kohler tank models: 4446-*, 4492-*, 4620t*, 4469-*, 4493-*, 4632-*, 4987t, 4474-*, 4473-*, 5380-*, 4485-*, 4491-*, 4633-*, 4634-*, 4708-*, 77030T.| Brand | Kohler #ad |
| Manufacturer | KOHLER #ad |
| Height | 1 Inches |
| Length | 5.25 Inches |
| Weight | 0.14 Pounds |
| Width | 5.25 Inches |
| Part Number | GP1018165-F |
| Model | K-GP1018165-F |
| Warranty | One-Year Limited Warranty |
More information #ad
