Top 10 Framing Square 12 Inch – Carpentry Squares

As an Amazon Associate I earn from qualifying purchases.

1. Swanson Tool Co., Inc

#ad

SWANSON Tool Co., Inc SW1201K Value Pack 7 inch Speed Square and Big 12 Speed Square without layout bar ships with Blue Book

#ad
Swanson Tool Co., Inc #ad - Useful for determining and marking angles and making square cuts on boards. Clearly identifiable scale: High-visibility, black gradations with a non-glare, matte finish for easy reading in any lighting conditions.

Features: get more bang for your buck with this value pack of two of our best selling speed squares. Multiple gradations: gradations included for marking common, Valley, hip, and jack rafters. Easy to use: when used as a saw guide, the speed square makes truing up a board easy. Durable material: heavy-gauge billet aluminum alloy construction is die-cast for increased accuracy versus laser-etched and extruded stamped rafter squares.
BrandSwanson Tool Co., Inc #ad
ManufacturerSwanson Tool Company, Inc #ad
Height1 Inches
Length12 Inches
Width12 Inches
Part NumberSW1201K
ModelSW1201K

2. Swanson Tool Co., Inc

#ad

Inc Swanson T0108 Big 12 Speed Square Layout Tool with Blue Book, Plain gradations, 12-Inch, Swanson Tool Co.

#ad
Swanson Tool Co., Inc #ad - Great for deck framing and stairway building! Plain gradations. Includes 60-page Swanson blue book of instructions. Heavy gauge aluminum with matte finish to prevent glare. Spaced notches to facilitate scribing lines. 1/4 in. And 1/2 in.
BrandSwanson Tool Co., Inc #ad
ManufacturerSwanson Tool #ad
Height12.3 Inches
Length0.9 Inches
Weight0.88 Pounds
Width12.3 Inches
Part NumberT0108
ModelT0108
WarrantySwanson Tool Co., Inc. warrants its products to be free from defects in material and workmanship for 1 year from the date of the original purchase. Swanson's only liability under this limited warranty shall be at their option to repair or replace any product determined by Swanson to be defective. No damages or other remedies available.

3. Swanson Tool Co., Inc

#ad

Orange, Swanson Tool Co T0701 12-Inch Composite Speedlite Square Layout Tool, made of High Impact Polystyrene

#ad
Swanson Tool Co., Inc #ad - Great for siding, won't mar finish. Packaged individuallyor in display merchandiser tag carded. Great for siding, won't mar finish. Includes 1/4" spaced notches to use for scribing lines tag carded. Constructed of lightweight high-impact structural foam plactic. Includes 1/4" spaced notches to use for scribing lines tag carded. Packaged individuallyor in display merchandiser tag carded.
BrandSwanson Tool Co., Inc #ad
ManufacturerSwanson Tool #ad
Height5 Inches
Length14 Inches
Width14 Inches
Part NumberT0701
ModelT0701
WarrantySwanson Tool Co., Inc. warrants its products to be free from defects in material and workmanship for 1 year from the date of the original purchase. Swanson's only liability under this limited warranty shall be at their option to repair or replace any product determined by Swanson to be defective. No damages or other remedies available.

4. IRWIN

#ad

Steel, Silver, 8-Inch by 12-Inch 1794462 , IRWIN Tools Carpenter Square

#ad
IRWIN #ad - This professional tool has permanent deep stampings that are durable. The forged tip allows for a secure grip and maximum contact eliminating stripping. The square has multiple scales: 1/8-, 1/10-, 1/12-, and 1/16-inch. The steel body is rust-proof and weather-resistant. Features rafter tables, brace and octagon scales and Essex board measure. Made from proprietary steel and heat-treated to control hardness. The shockwave impact Duty accessory line is not only ideal for heavy-duty impact applications.
BrandIRWIN #ad
ManufacturerIRWIN #ad
Height0.08 Inches
Length12 Inches
Weight0.6 Pounds
Width8 Inches
Part Number1794462
Model1794462

5. Mr. Pen

#ad

Carpenters Square, L Square Ruler, L Shape Ruler, Framing Ruler, L Ruler, Framing Square, Right Angle Ruler, 8 inch x 12 inch, Mr. Pen- Carpenter Square, Steel Square, Framing Tools, Metal Square

#ad
Mr. Pen #ad - Black framing ruler, the shorter leg measures at 8 inch outside And 6. 5 inch inside – longer leg measures At 12 Inch Outside And 11 Inch Inside. This l ruler includes imperial units on one side With 1/16-Inch Graduations And Metric Units On The Other Side With mm Graduation. Ideal for carpentry applications in framing, roofing, stair work, In Making Layouts And Patterns - Can Also Be Used As Straightedge For Determining Flatness Of A Surface. High-quality l-ruler, carbon Steel Material – Sturdy And Durable Against Rusting. Easy to read markings With Bright White On Black Design.
BrandMr. Pen #ad
ManufacturerMr. Pen #ad
Part NumberFR01

6. VINCA

#ad

VINCA SCLS-1208 Carpenter L Framing Steel Square 8 inch x 12 inch Measuring Layout Tool

#ad
VINCA #ad - Finished with rust prevention treatment. Durable punching press finished graduations. Size: 8" x 12"; square accuracy: ±00573°. Front and backside measurable design in inch. Higher quality 1cr13 hardened steel for long lasting use.
BrandVINCA #ad
ManufacturerClockwise Tools Inc. #ad
Height0.1 Inches
Length8 Inches
Weight0.6 Pounds
Width12 Inches
Part NumberSCLS-1208
ModelSCLS-1208

7. VINCA

#ad

VINCA ARLS-12 Aluminum Rafter Carpenter Triangle Square 12 inch Measuring Layout Tool

#ad
VINCA #ad - Comes with rafter conversion table. 12" x 12" square with multiple scales; 1/8-, 1/10-, 1/12-, and 1/16-"; 12" x 0.001. Thick aluminum body that support heavy duty use. Wider base that provide stable grip on materials. Durable deep stampings; Yellow markings on black.
BrandVINCA #ad
ManufacturerClockwise Tools Inc. #ad
Height1 Inches
Length12 Inches
Weight1.13 Pounds
Width12 Inches
Part NumberARLS-12
ModelARLS-12

8. POWERTEC

#ad

Anodized Aluminum Finish – 3pc Set, POWERTEC 80005 L Square Ruler Set w/Bubble Levels

#ad
POWERTEC #ad - Build: constructed with premium grade aluminum for enhanced strength, long-term durability and possesses an anodized finish for protection against corrosion – perfect for indoor and outdoor applications.

Features: accurate standard and metric measurements, easy-view fluorescent green bubble levelers, hanging holes for easy storage and a lightweight design that’s built with a heavy duty construction. Includes: 3-piece set of l-shaped square rulers overall lengths: 6-1/4”, 10-3/16”, 16-1/8”. Applications: these handy carpenter squares are ideal for any home or professional workshop that does carpentry work, woodworking, hobby work, frame work, or general purpose crafts that demand true-square measurements. Function: these multi-functional ruler level tools keep your projects square and level, providing you with accurate, high precision results.
BrandPOWERTEC #ad
ManufacturerPOWERTEC #ad
Height0.6 Inches
Length17.5 Inches
Weight1 Pounds
Width9.25 Inches
Part Number80005
Model80005

9. ATE Pro Tools.USA

#ad

Framing Square L Shaped Square 8" x 12" Standard, 90 Degree Square, 200mm x 300mm Metric, Carpenters Square, Inside/Outside Measurments, Two Sided -Dual Marking, Roofing/Rafter Square, Metal

#ad
ATE Pro Tools.USA #ad - Carpenters / rafter square / wood working / roofing / 90 Degree Angle / Builders Tool. Framing Square. 8" x 12" standard inch / 200mm x 300mm Metric. Square. L shaped.
BrandATE Pro Tools.USA #ad
ManufacturerATE Pro Tools, Inc. #ad
Height0.1 Inches
Length12.25 Inches
Weight0.48 Pounds
Width8.25 Inches
Part Number41153
Model41153

10. WORKPRO

#ad

7 IN. Aluminum Alloy Die-casting Carpenter Square and 12 Inch Zinc-alloy Die-casting Square Ruler Combo Rafter Square Layout Tool, WORKPRO Rafter Square and Combination Square Tool Set

#ad
WORKPRO #ad - Clearly identifiable scale - the rafter square finishing features low glare and protective powder coated. The combination ruler itself is die-cast from zinc alloy and carries a steel ruler made of stainless steel with a matte finish. It has permanent deep markings and white graduations for max Readability any lighting.

The rafter square can be used as a guide for cross-cutting lumber. The combination square has a 12-inch stainless steel ruler which has 3 types of minimum scale value: 1/16”, try square, miter square, 1/32” and 1mm. User-friendly - lipped fence allows you to easily brace the rafter square flush with the wood, creating a straight or angled line that is proportionate to the wood's edge. Durable material - the rafter square is die-cast from heavy-gauge aluminum alloy which enable it to last long and still give accurate measurement. They both work accurately at an angle 90 degree or 45 degrees.

Wide versatility - easy-to-read level vial and a metal scriber on the side of the combination ruler increase product practicality and versatility. The spring screw of the combination square makes you easier to detach the stainless steel ruler and smooth ruler is easier to slide for your measurement. The stainless steel ruler of combination square has deep etching scale for superior legibility and long-lasting usage. Multiple graduation - 7-inch rafter square has many kinds of graduation which blends the features of framing square, and protractor square.
BrandWORKPRO #ad
ManufacturerHANZGHOU GREATSTAR INDUSTRIAL CO.LTD #ad
Height1.97 Inches
Length13.98 Inches
Width5.71 Inches
ModelNOVASAT-0409-1513-35