As an Amazon Associate I earn from qualifying purchases.
1. POWERTEC #ad
POWERTEC 71489 Aluminum Multi T-Track Fence with Laser Measure Left to Right, 3” High x 24" Long Multi Track #adPOWERTEC #ad
- Universal: part of our exclusive multi-track system, this multi-functional item accepts the most common accessory fasteners 1/4” T-bolts, 5/16” T-bolts and 1/4” hex bolts.
Optimal utility: 24 inches long superior straightness - laser measured left to right, spaced 3/4” apart on center, 3/4” thick and 3 inches high. Function: this multi-t track can be used for a wide assortment of woodworking projects, workstations or customized fences router, including creating general fixtures and jigs, drill press and miter gauge.
Premium grade: high quality tracks made with corrosion resistant extruded aluminum for strength and long-term durability. Includes: 1 multi T Track Fence 24 inch.
2. Taytools #ad
Taytools 36 inch Multi Slot Aluminum T Track 2-7/8 inches x 5/8 inch for Bandsaw, Router and Drill Press Fences 36 inch T Track #adTaytools #ad
- Overall size is 2-7/8 inch tall and 5/8 inch thick. There are 2 t slots on one face and a single slot on all remaining faces. The track is made from premium grade extruded aluminum and has a black anodized finish.
Use taytools angle adjustable T Track Fence Brackets sold separately to attach to flush mounted T tracks in any table. It can be used to make fences for the bandsaw, hold-downs and feather boards using any standard ¼-20 T bolts or T nuts.
This heavy-duty t track is the perfect accessory for making a custom fence, the multiple T slots allow attachment of all kinds of stops, router table or crosscut sled. Once installed, sacrificial/extended fences, fixture, drill press, jig or workstation.
3. Taytools #ad
Bit Guard, Adjustable Stop and Dust Port, Taytools 300016 Deluxe 24 Inches Long Router Table Fence 3-1/2 Inches Tall Anodized Aluminum with Feather Board #adTaytools #ad
- The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face.
Comes equipped with a bit guard, feather board and adjustable stop. Has a dust port with 2-1/2 inch OD and 2-1/4 inch ID opening.
Made from 3/8 inch thick precision straight extruded anodized aluminum that will not fluctuate when humidity changes. T tracks on the top and front accommodate a wide range of accessories. Fence faces are made from smooth melamine coated MDF and are adjusted by way of 4 rear mounted threaded knobs.
4. KREG #ad
Kreg KMS7704 48-Inch Heavy Duty Track #adKREG #ad
- Recess for 1/2-inch measuring tape. Commercial-grade L-shaped aluminum extrusion. 4-feet long. Features four t-slots that securely interface with the head of a standard 1/4-inch hex bolt. Manufacturer's limited 30-day warranty.
5. Bon Tool #ad
Bon Tool 24-120 Screed -3/4" X 4" X 6' Reinforced H Alum #adBon Tool #ad
- Country of origin :United States. The largest selection of tools manufactured to the highest quality standards. Leader in professional contruction tools. Product type :TOOLS.
|Brand||Bon Tool #ad|
|Manufacturer||Bon Tool #ad|
6. Peachtree Woodworking Supply #ad
Uni Style Table Saw Fence with Sacrificial UHMW Sub Fence Face | Designed as an Upgrade For Older Delta Uni Saws Proudly MADE IN USA 43" Length #adPeachtree Woodworking Supply #ad
- The fence is designed as an up-grade fence for the factory made Delta Uni-fence Table Saw System. This also means that you can cut any 1/2” thick material to length and use it as a sacrificial fence face. Made from a solid piece of extruded aluminum and made proudly in the usa, the uni style table saw fence is built to last and perform in your workshop.
The uni style table saw fence allows you to add endless amounts of jigs and fixtures and with the included UHMW sacrificial fence face you can cut into it in order make clean rabbet cuts on your table saw! The front of the fence is recessed to accept the 1/2” thick uhmw strip.
The uni style table saw fence is a heavy duty, single piece of aluminum that has been extruded for superior strength. Each fence is milled, cut and extruded to exacting specifications. The original delta uni saw table saw fence and Base is NOT included as this is an upgrade to the Delta Uni Fence Section ONLY.
Many store bought jigs or fixtures will work with the fence as long as the bolt is the correct size. We recommend using wood or uhmw to make your fence face as both materials are easy to cut and machine as needed to fit and neither material won’t hurt your table saw blade should it come in contact. The delta uni-fence system has long been regarded as on of the best over the years but the fence itself needed some improvements. The uni style table saw fence includes 1 each Uni Style Table Saw Fence Section with UHMW sub fence face.
7. Faztek #ad
48" Length x 1-1/2" Width x 3" Height, Faztek, 15QE1530-48 15QE1530 Aluminum 6063-16 T-Slotted Heavy Extrusion with Clear Anodize Finish #adFaztek #ad
- Directly interchangeable with other major manufacturer's of T-Slotted extrusions. Convenient field modification. Faztek's t-slotted aluminum extrusions, can be used to create a wide variety of projects. Measures 48" length by 1-1/2" width by 3" height. Corrosion resistant.
8. Mahaishangmao #ad
T-slot rail aluminum woodworking saw for woodworking DIY workbench for fence 75 mm height with T-rails 1000MM #adMahaishangmao #ad
- T-slot miter track length: 600mm/1000mm/1200mm T-track. The profile can be used for fences and different kind of woodworking projects like CNC, Table Saw, Router Table etc.
600mm/1000mm /1200mm 75 type t-slot Aluminium Woodworking Backer Table saw. 600mm/1000mm/1200mm aluminium Fence with Metric Scale. Made from high quality aluminum alloy material for strong strength and long durability.
9. Shinwa Measuring Instruments #ad
Shinwa 24" Extruded Aluminum Cutting Rule Ruler Gauge with Non slip rubber Backing 33295 #adShinwa Measuring Instruments #ad
- Markings are graduated in 1/16ths. Made in japen by Shinwa Measuring Instruments. Rule has a rubber strip on the back to prevent slipping. Extrusion is 1. 380" wide by. 190" thick and tapers on one edge. Has a hanging hole for easy storage.
10. Fulton #ad
Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape #adFulton #ad
- This allows you to make repetitive length cuts without worrying if the pieces will end up the same. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence.
Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence.
Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts.
The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. The fulton aluminum miter fence is made from one, solid piece of extruded aluminum and has the exact same size track on the top of the fence as there is on the bottom. The aluminum miter fence has been cut at 45 degrees on both ends of the fence. On the back, there is an offset track for mounting the fence to a miter gauge. Full color installation instructions are included.