As an Amazon Associate I earn from qualifying purchases.
1. PORTER-CABLE #ad
PORTER-CABLE Door Hinge Template 59370 #adPORTER-CABLE #ad
- Included along with the template are a high-speed mortiser router bit with bearing brads, instructions. Quick and easy set up with lock-in pins to ensure security.
8 hinge sizes from 2-1/2 inch to 6 inch and 5 door sizes from 1-3/8 inch to 2-1/2 inch. Complete with double headed nails for easy removal. Included along with the template are a high-speed mortise router bit with bearing brads, instructions.
Complete with double headed nails for easy removal. Made from fiberglass, reinforced plastic with extended platform for better router stability. 8 hinge sizes from 2-1/2 inch to 6 inch and 5 door sizes from 1-3/8 inch to 2-1/2 inch. Quick and easy set up with lock-in pins to ensure security.
2. Milescraft #ad
Black, Milescraft 1213 HingeMate300, For Mortising of Interior Doors #adMilescraft #ad
- Sturdy steel template frame with door thickness selector knob for 1-3/4 and 1-3/8-Inch doors. By routing matching mortises for hinges, strike plates, and latch plates into the door and jamb.
Includes durable tungsten carbide tipped router bit with ball bearing eliminating the need for guide bushings on your router. Centered tape measure tabs and easy measure guide ensure correct and precise installation of door hardware.
Featuring an easy to use drop-in template design with a sturdy steel frame. Increase security and privacy in your home by replacing interior and exterior doors. Easy to use drop in template design with clearly marked templates. Reusable packaging for template storage when not in use.
|Manufacturer||Milescraft Inc. #ad|
3. IRWIN #ad
IRWIN Door Lock Installation Kit for Wooden Doors 3111001 #adIRWIN #ad
- Self-centering jig fits all common door widths. Adjustable for both 2-3/8" and 2-3/4" backsets. Complete installation in 4 easy steps. Includes router bit and hinge and bolt plate templates. Carbon hole saws quickly create handle and lock openings for interior and exterior doors.
4. Ryobi - Ryobi Limited #ad
Ryobi A99HT3 Door Hinge Installation Kit/Mortiser Template Bundled with Ryobi A99LM2 Door Latch Installation Kit for Accurate Chiseling and Scoring 1 #adRyobi - Ryobi Limited #ad
- Hinge kit - clamps to standard doors thanks to the integrated screw in clamp that will let this tool fit standard door thicknesses. Latch kit - two included driver bits: 1x 1-inch PH2 bit 1x 1-inch SL 8-10 bit.
Hinge kit - 3 included bits with built in storage carbide tip router bit, ph2/8-10sl double ended screwdriver bit for routers and screwdrivers, self centering hinge bit, so you can get to work on renovating your home right out of the package.
Latch kit - built-in scoring and chisel tool: This kit will help you minimize the amount of tools you bring to the jobsite. 2 items included - ryobi door Hinge Installation Kit and Ryobi Door Latch Installation Kit.
5. IRWIN #ad
Bi-Metal 3111002, IRWIN Tools Door Lock Installation Kit #adIRWIN #ad
- Adjustable for both 2-3/8-Inch and 2-3/4-Inch backsets. This product is highly durable. Includes bolt plate template and router bit. Bi-metal door lock installation Kit For Metal & Wood Doors.
Bi-metal hole saws for metal and wood doors. Fits all interior and exterior doors. This product is manufactured in China. Self centering jig fits all common door widths.
6. IVY Classic #ad
Carded, IVY Classic 27003 Carbon-Steel Lock Installation Kit with Guide Template for Wood Doors #adIVY Classic #ad
- Adjustable guide template for easy and exact drilling with snap-lock arms for selecting door width and backset. Adjustable plastic guide template fits 2-3/8-inch and 2-3/4-inch backsets.
Adjustable plastic guide template fits 1-3/8-inch and 1-3/4-inch thick doors. Includes 1-inch and 2-1/8-inch carbon-steel hole saws and a D type arbor with pilot drill.
7. BIG HORN #ad
Replaces Templaco LS-166A, Big Horn 70156 'A' Latch & Strike Template Kit, Finish Size 1-Inch x 2-1/4-Inch #adBIG HORN #ad
- Use a 1/2” cutter and a 5/8” OD template guide attached to your router to produce perfect mortises. Length of the template is 10” and it’s supplied with two nail attaching assemblies to attach to your door jamb. Creates a finish mortise of 1" by 2-1/4" for the edge of the door & 2-1/4" high x 1-3/4" wide or Full Lip cuts clear through the edge of the door jamb on the edge of the jamb for doors up to 1-3/4" thick.
Adjustable for 1-3/8” and 1-3/4” door jambs. Use a 5/8” outside diameter router template guide on your router and a 1/2” hinge mortising bit.
8. KATA #ad
KATA 1-3/8", 1-3/4" Door Lock Installation Kit for Wooden Doors with Guide Template,Door Lock Hole Saw,Carbon Steel #adKATA #ad
- Lifetime guaranteeyour satisfaction is the most important thing to us. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us in the first time.
Easy lockset installationthe adjustable guide template for easy and exact drilling with snap-lock arms for selecting door width and backset.
Complete installation in 4 easy steps. Professional qualityDurable carbon steel made hole saws and arbor, reinforced plastics guide template. For daily usedesigned to fit the most common lock sizes in daily use and works well with wood doors.
The adjustable plastic guide template fits 1-3/8-inch and 1-3/4-inch thick doors, fits 2-3/8-inch and 2-3/4-inch backsets. Package includes1pc u-type adjustable plastic guide template, 2PCS 1”25mm and 2-1/8”54mm hole saws, 1PC arbor with drill bit. Depth of saw blade is 50mm.
|Manufacturer||KATA TOOLS #ad|
9. Mibro #ad
MIBRO 366291 Ultimate Door Lock and Hinge Installation Kit for Wood Doors #adMibro #ad
- Item package Weight: 1. 3 lb. Item package dimension: 7. 95" l x 7. 05" w x 2. 85" h. Country of Origin: China. Model number: 366291.
|Manufacturer||The Mibro Group #ad|
|Warranty||Guaranteed for the life of the product against defects in materials of workmanship|
10. TREND #ad
Trend LOCKJIG Lock Jig for Routing Face-Plate Recess and Mortise #adTREND #ad
- Needed accessories: to rout the lock case mortice, a router with an 80mm plunge and fitted with a 30mm guide bush is required, along with a suitable 12mm diameter cutter with an overall length of 115mm to achieve the maximum mortice depth of 70mm.
Easy to use: each template is stamped to indicate the locks it can be used with; 4-lettered plates for lock cases and 12-numbered plates for the faceplates; Simplifying and speeding up the selection process as well as eliminating costly errors.
Adjustable sizes: the set of 12 lock face plate and 4 lock case templates supplied are held in the Lock Jig with magnets for fast swapping, requiring just one router and cutter to do both the lock case mortice and the faceplate. Quick and secure: with its tool-free setup, the trend lock Jig is very fast to set to any door width from 34mm to 58mm wide; Full-length clamping plate ensures jig remains rock solid in use, secured with locking levers and twin clamping knobs.
Full instructions: a comprehensive laminated reference sheet with common lock model also offers a secondary chart on the reverse side for info relating to faceplate and lock case sizes to quickly select the correct templates and achieve perfect results.
|Warranty||1 Year for Material and Workmanship Defect|