Top 10 Desoldering Wick with Flux – Welding Equipment & Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Lesnow

#ad

Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Remover Tool Solder Sucker 1 piece Desoldering Wick Wire Roll and Disassemble Electrical Components

#ad
Lesnow #ad - The solder wicks can be used to correct mistakes with small boards on PCBs, desoldering computer parts such as a motherboard, re-solder mechanical keyboard switches, unsoldering old wire from devices, remove relays and other components from printed circuit boards, clean alloy on smd components and more.

The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work. This desoldering wick has geometrically-precise weave with copper and rosin, once the desoldering wick and the solder has been heated, work from the tip of the desoldering wick, the solder braid can quickly absorbed molten solder and left a clean working area.

The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency. 1 pieces of no-clean solder wicks, each wick is about 10ft long and 01 inch in width, enough quantity and length for your daily needs.
BrandLesnow #ad
ManufacturerLesnow-FT #ad
Height0.5 Inches
Length5 Inches
Weight0.5 ounces
Width4 Inches
Part NumberLesnow-FT-01

2. NTE Electronics

#ad

NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length

#ad
NTE Electronics #ad - 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. Available with standard or anti-static bobbins. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board.
BrandNTE Electronics #ad
ManufacturerNTE Electronics, Inc. #ad
Part NumberSW02-10
ModelSW02-10

3. TOWOT

#ad

Desoldering Wick Braid Remover.Desolder Soldering 2mm W 0.08'' L 9.8', TOWOT Solder Wick Braid With Flux No-Clean Electronic

#ad
TOWOT #ad - Quality materials:the braided desoldering wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.

Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering. Thank you! Low residue design: no-clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.

Extensive applications: the braided solder wicks are suitable for labs, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, school, bringing more convenience to your daily work. Warranty :if you have any questions, please feel free to contact us at any time.
BrandTOWOT #ad
ManufacturerTOWOT #ad
Weight60 Grams
Part Numbersw

4. Herain

#ad

Desoldering Wicks Removal Tool Solder Sucker, Herain No-Clean Solder Wick, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components, Desoldering Braided Wicks with Flux

#ad
Herain #ad - 3. Widely used: no-clean solder braid is suitable for welding work in laboratories, precision instruments and meters. If you have any product questions, you can contact us at any time. 1. High-quality materials: the solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, low residual and no halide, has good thermal conductivity, and clean tin absorption.

2. Geometric braid design: the desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board. The main board desoldering spot is removed, and it is used with the soldering station. 5. Ingenuity quality: 1 piece of no-clean solder braided wicks 0078 inch wide, 9.

84 ft length, which is sufficient to meet your work requirements. It can absorb tin quickly and a large amount of tin, electrical appliances, It is suitable for all kinds of electronics, schools and homes, industries, and is dedicated to remove excess solder.4. Easy to use: desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder.
BrandHerain #ad
ManufacturerHerain #ad
Height0.4 Inches
Length1.85 Inches
Width1.85 Inches
Part NumberXXX00

5. Youland

#ad

Soldering Solder Iron Tip Cleaner + Solder Rosin Flux Paste 0.35oz/10g + Desoldering Wick Solder Braid Remover Wire Kit 2.5 ft for Electronics Soldering Repair DIY Work

#ad
Youland #ad - Just contact us freely, 1 * Solder Flux Tin 035oz/10g, 1 * desolder Copper Wick. Package include : 1 * soldering Iron Tip Cleaner, refund and replacement if you have any problem about the Welding Items. Note: solder wick & flux were packed in the container. Youland service & package contents of solder kit —— we accept return, we guarantee you 100% satisfaction.

No water required, softer than the tip plating, meaning less chance of oxidation and won't reduce tips temperature, it made from brass coils, but harder than the oxidation that forms on the tip. The combined items make you no longer need to make multiple purchases, saving you time to focus on your soldering project. No-clean soldering flux paste, minimal residue —— neutral ph7±03, it has stable performance, Not corrosive to IC and PCB. Higher efficiency solder head cleaning ball than wet sponge —— the sturdy metal container cleaning pod was perfect substitution to a wet sponge, just stab the iron into the holder. Your ideal choice of soldering solder accessories kit —— these 3 products are the most frequently used auxiliary products in the electric welding process, These 3 products are the most frequently used auxiliary products in the electric welding process.

Ideal auxiliary item for manufacturing high-quality electronic products. No-clean 100% copper wick desoldering remover —— residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board; Its anti-oxidation stability and anti-corrosion ability make the desoldering wire has excellent performance in desoldering, bring you a lot of convenience & improve the efficiency of maintenance.
BrandYouland #ad
ManufacturerYouland #ad
Height3.14 Inches
Length2.83 Inches
Width2.83 Inches
Part NumberRS0001

6. goot

#ad

GOOT Solder Wicks Made In Japan No-Clean Solder Braided Wicks Desoldering Wicks With RMA Flux,59'Length x 0.12"Width

#ad
goot #ad - High efficiency -- high performance solder absorbing wire precision preparation with copper wire and special chemical formula, suitable for precision instruments RMA corresponds to the use of standard flux. Recommended for lead-free solder with high heating load.

Brand history -- founding in 1965, goot had captured a 60 per cent share of Japan’s domestic market for soldering products and for almost 50 years has been providing customers with a wide range of high quality and easy-to-use soldering products. 100% satisfaction guarantee -- you can return the undamaged product and packaging without any reason within 30 days. No fluorine, low residue, suitable for a variety of PCB circuit boards. Any problems can be contacted by email.

Removes solder faster with better heat response than previous wicks. Good quality -- solder wire with flat needle type preparation, suitable for fast absorption. Our thin and soft desoldering wire’s flat braid has efficient thermal transmission. It not only help you improve efficiency and quality, soft design, fast heat transfer, also more environmentally friendly. Size - W 012" l 59". Safety and variety -- use at ease.
Brandgoot #ad
Manufacturergoot #ad
Part Numbergoot

7. MG Chemicals

#ad

Brown, MG Chemicals 427 Desoldering Braid #5 Fine Braid Super Wick with RMA Flux, 5' Length x 0.125" Width

#ad
MG Chemicals #ad - Manufactured under SPC guidelines. Designed to leave a residue that is environmentally safe. Oxide-free clean copper. Static free bobbins. Only pure type 'rma' rosin is used meeting the requirements of MIL-F-14256F ANSI/J-STD-0004.
BrandMG Chemicals #ad
ManufacturerMG Chemicals #ad
Weight0.02 Pounds
Part Number427
Model427
Warranty[email protected]

8. AUSTOR

#ad

1.5m Length with Flux, Desoldering Vacuum Pump Solder Removal Tool, AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick 2.0mm/2.5mm/3.0mm Width

#ad
AUSTOR #ad - Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering. 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size.

High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand. High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable.

Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, can be used to clean the spare solder on the pin away to avoid short circuit, length 1. 5m, 2 pieces for each size; geometrically-precise weave, width 2. 0mm/2. 5mm/3. 0mm, to meet your various of soldering needs.
BrandAUSTOR #ad
ManufacturerAUSTOR #ad
Height0.79 Inches
Length7.48 Inches
Width5.12 Inches

9. YCD

#ad

No-clean soldering core 2.0mm, 29.5 inches, 4-in-1 welding tool set, soldering iron tip cleaner + 0.6mm solder wire 1.76 oz / 50 g + Rosin Solder Flux Paste 0.35 oz / 10 g

#ad
YCD #ad - Soldering iron tip cleaner - the best soldering iron Tip Cleaner and base, does not reduce the tip temperature. Made of brass wire, no water, it is cleaner than traditional sponges. Safe and clean to use.

Welded 4-in-1 set-- contains 4 necessary welding products, saving you time to purchase multiple times. Solder wire - weight 1. 76 oz / 50 g. Promote the flow of solder, less residue, improve the efficiency of welding process, allow solder to form solid, no need to clean, lasting mechanical and electrical connections. No-clean desoldering core - 2.

0mm wide and 29. 5 inches long, low residue. Good fluidity, uniform solder joints, clean, uniform heating, contribute to the rapid completion of welding. Removes more solder than traditional wicks, made of pure oxygen-free copper wire, it has strong ability to absorb tin. No cleaning, making it easy to correct errors on small PCB boards. Rosin - weighs 035 oz/10 g.
BrandYCD #ad
ManufacturerYCD #ad
Part Number01

10. MG Chemicals

#ad

443 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 25' Length x 0.075" Width, Green, MG Chemicals

#ad
MG Chemicals #ad - Static free bobbins. Oxide-free clean copper. Manufactured under SPC guidelines. Designed to leave a residue that is environmentally safe. Only pure type 'rma' rosin is used meeting the requirements of MIL-F-14256F ANSI/J-STD-0004.
BrandMG Chemicals #ad
ManufacturerMG Chemicals #ad
Height0.3 Inches
Length2.3 Inches
Weight0 Pounds
Width2.2 Inches
Part Number443
Model443
Warranty[email protected]