As an Amazon Associate I earn from qualifying purchases.
SZCY LLC #ad - Diameter: 52mm, chuck portion length: 45MM, Chuck portion diameter: 16mm. Motor length: 200mm, high precision spindle run out 001-003. Operating voltage: 100vdc, power: 500w, input: ac110v, speed: Up to idle up to 12, 000 rev / min, Torque: 5000G/CM.
mcwdoit #ad - Thanks. 500w spindle & clampoperating voltage: dc 24-100v ; maximum current: 6A; Speed: 3000-12000rpm; Diameter: 52mm; Torque: 05nm.
Milling cutter3. 175mm1/8'' shank, 5pcs flat nose spiral Bit 2-Flute + 5pcs V-shaped End Mill Bit. Match with the commonly used milling cutters, avoid buying collects that are not needed.
VEVOR #ad - Variable frequence drive : power: 2. 2 kw, input frequency: 50 hz, output voltage: 110v, input voltage: 110v, Input Phase: 1 Phase, output phase: 3 phase, Output Frequency: 0-400 Hz, Output Current: 25A.
Water pump: voltage: 110v, power: 80w, flow rate: 3500 l/h, Pump Lift: 11.48 ft / 3. 5 m. Wide use: widely applicable to engraving machine, conveyors, car hoists, pumps, mills, lathes, and many more.
5a, voltage: 110v, Accuracy: 0002" / 005 mm, 2 pcs 7005. Package content: 1 x water cooled spindle motor, 1 x variable frequency drive, 1 x water pipe, 1 x set of Mill Bits 20 PCs, 1 x Connecting Wire, 1 x Water Pump, 2 x aviation plugs, 1 x vfd panel keypad extension cord, 13 x ER20 Collets, 1 x Spindle Clamp, 1 x Manual.
Daedalus #ad - Quiet and efficient: Smooth running, Spin up fast and have minimal vibration. Spindle: 3 wires-brush-less, er11, 0-9000rpm, 48v dc, 600w, φ 2-3/16". Speed readout: come with the LCD display, Real-time read spindle speed.
RATTMMOTOR #ad - 2. 2kw 110v vfd driver inverterinput voltage: 110v+/-15%; output voltage:105v-120vac; input frequency: 48-63 Hz; Output Frequency: 0-400 Hz; Input Phase: 1phase; Output Phase: 3 phase.
3 runout off: less than 002mm; accuracy: 0003--0005mm; speed:0-24000rpm; frequency: 0-400Hz. 14pcs/set er20 colletssize: 3. 175mm, 2mm, 12mm, 10mm, 7mm, 5mm, 6mm, 9mm, 3mm, 1mm, 8mm, 11mm, 4mm, 13mm.7
Zhong Hua Jiang #ad - Package include-1pcs 110v/1. 5kw square spindle motor4. 3kg, 9. 5lbs） +1pcs 110v/1. 5kw vfd inverter +13pcs collets er111mm-7mm + 20pcs Drill Bits+ 1meter aviation wire +2pcs wrenches. Easy and fast to install -the vfd had been pre-programmed for basic parameters, you don't need to make extra setting up.
It includes wire and 2 wrenches to connect spindle motor with VFD. It will take just 5 minutes to install all and make all functions running.
Application-wood/plastic/aluminum carving/engraving machine, advertisement engraving machine, CNC router machine, small sized processing center, high speed centrifuge etc.
MYSWEETY #ad - Run out off: less than 0005mm, speed:0-24000rpm, dc/ac inverters, Frequency of Inverter: 0-400Hz. Er11 collet set gripping range: 1mm to 7mm 1mm, 5mm, 6mm, 6.5mm, 3mm, 2. 5mm, 2mm, 4mm, 1.5mm, 3. 5mm, 4. 5mm, 5. 5mm, 7mm. 100% satisfactory, please contact us, if you have any problem, we will help your money back.
Zhong Hua Jiang #ad - Application-wood/ copper/brass/aluminum/pvc/plastic/carving/engraving machine, CNC router machine, small sized processing center, advertisement engraving machine, high speed centrifuge etc. Warranty assurance-we have 20 years manufacturing experience in this field, pls contact us, any question or problem, we will get you satisfied and get all problems resolved.
Easy and fast to install -the vfd had been pre-programmed for basic parameters, you don't need to make extra setting up. We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running.
Package include-1pcs 110v 1. 5kw water cooled spindle motor +1pcs 110v 1. 5kw vfd inverter+ 1pcs Φ65mm clamp mount +13pcs er11 collet1mm-7mm +1pcs Water Pump+ 10 meter Water hose +10Pcs Nano Blue Coat End Mill CNC Router Bits, 08-3mm, 1/8" shank+ aviation wire+power wire+2pcs wrenches.
RATTMMOTOR #ad - 2. 2kw 220v water cooled spindle motor er20 colletnotice: 1 the spindle speed can't lower than 9000rpm!!!! 2 This spindle only supports clockwise rotation, not reverse rotation.
14pcs/set er20 colletssize: 3. 175mm, 1mm, 11mm, 2mm, 12mm, 10mm, 7mm, 6mm, 9mm, 5mm, 3mm, 4mm, 8mm, 13mm.3 runout off: less than 002mm; accuracy: 0003--0005mm; speed:0-24000rpm; frequency: 0-400Hz. 4 this spindle motor kit applied to Lathes, Car Hoists, Mills, Pumps and Conveyors, etc.7
Zhong Hua Jiang #ad - Advantage -very quiet;use ordinary water as a coolant ; authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer2 years for 8 hours/day; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0005mm that 10 times precision beyond normal spindle motor.
Package include-1pcs 110v 2. 2kw water cooled spindle motor +1pcs 110v 2. 2kw vfd inverter+ 1pcs Φ80mm clamp mount +13pcs er20 collet1mm-13mm +1pcs Water Pump+ 10 meter Water hose +10Pcs Nano Blue Coat End Mill CNC Router Bits, 08-3mm, 1/8" shank+ aviation wire+power wire+2pcs wrenches.
Application-wood/ copper/brass/aluminum/pvc/plastic/carving/Engraving machine, advertisement engraving machine, small sized processing center, CNC router machine, high speed centrifuge etc. Easy and fast to install -the vfd had been pre-programmed for basic parameters, you don't need to make extra setting up. We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running.
1. SZCY LLC
#adCNC Spindle Kit 500W Air Cooled 0.5kw Milling Motor + Spindle Speed Power Converter + 52mm Clamp + 13pcs ER11 Collet + 10pcs CNC Bits for DIY CNC Engraving
#adMore information #ad
Insulation resistance: > 2 megohms, Dielectric strength: 400V. 100% service satisfactory, If you have any questions, please contact us.| Brand | SZCY LLC #ad |
| Manufacturer | SZCY LLC #ad |
| Part Number | 0010-ZZ-500W |
| Model | 500W Spindle Kit |
More information #ad
2. mcwdoit
#adMcwdoit CNC Spindle Kit 500W Air Cooled 0.5kw Milling Motor + Spindle Speed Power Converter + 52mm Clamp + 1/8’’ 1/4’’ 6mm ER11 Collet + 10pcs CNC Bits for DIY Engraving
#adMilling cutter3. 175mm1/8'' shank, 5pcs flat nose spiral Bit 2-Flute + 5pcs V-shaped End Mill Bit. Match with the commonly used milling cutters, avoid buying collects that are not needed.
More information #ad
Er11 collect 2pcs - 1/8'' 3. 175mm ; 2pcs - 6 mm; 2pcs - 1/4'' 6. 35mm. Adjustable speed power supplyinput: ac 110/220v±10%, 50/60hz; output: dc 0-100V, maximum current: 6A; Support: Manual Speed Adjustment or Mach3 G code Speed Adjustment. Service satisfactory If you have any questions, please contact us.| Brand | mcwdoit #ad |
| Manufacturer | WAM Direct #ad |
More information #ad
3. VEVOR
#adVEVOR VFD CNC Spindle Motor Kits 110V CNC Spindle Motor Kits 2.2KW Water Cooled Spindle Motor 400HZ 24000RPM VFD 3HP Water Pump 80W Water Pipe 6m&13pcs Collet CNC Kit&20pcs Mill Bits for CNC Engraver
#adWater pump: voltage: 110v, power: 80w, flow rate: 3500 l/h, Pump Lift: 11.48 ft / 3. 5 m. Wide use: widely applicable to engraving machine, conveyors, car hoists, pumps, mills, lathes, and many more.
More information #ad
Spindle motor: power: 2. 2kw, bearings: 2 pcs 6002, cooling: water cooled, speed: 0-24000 rpm, runout off: 0.002" / 005 mm, collet chuck: er20, frequency: 400 hz, Current: 8.55a, voltage: 110v, Accuracy: 0002" / 005 mm, 2 pcs 7005. Package content: 1 x water cooled spindle motor, 1 x variable frequency drive, 1 x water pipe, 1 x set of Mill Bits 20 PCs, 1 x Connecting Wire, 1 x Water Pump, 2 x aviation plugs, 1 x vfd panel keypad extension cord, 13 x ER20 Collets, 1 x Spindle Clamp, 1 x Manual.
| Brand | VEVOR #ad |
| Manufacturer | VEVOR #ad |
| Part Number | VEVOR VFD CNC Spindle Motor Kits 110 2.2 |
More information #ad
4. Daedalus
#ad600w, ER11, Daedalus CNC Brushless Spindle Motor Kit, 48V DC, 9000RPM
#adMore information #ad
Mach3 control: support Mach3 control motor after driver upgrade, Reference manual for wiring. Cost-effective: Without Brush, maintenance-free, removal dust when necessary.| Brand | Daedalus #ad |
| Manufacturer | Daedalus #ad |
| Height | 2.17 Inches |
| Length | 8.11 Inches |
| Width | 2.17 Inches |
| Part Number | 6 |
More information #ad
5. RATTMMOTOR
#ad2.2KW 80mm Water Cooled Spindle Motor 110V ER20 400Hz 24000RMP+2.2KW VFD Inverter 110V+80mm Spindle Motor Mount Clamp+14pcs ER20 Collets+80W 110V Water Pump+5M Pipe, RATTMMOTOR CNC Spindle Motor Kit
#ad3 runout off: less than 002mm; accuracy: 0003--0005mm; speed:0-24000rpm; frequency: 0-400Hz. 14pcs/set er20 colletssize: 3. 175mm, 2mm, 12mm, 10mm, 7mm, 5mm, 6mm, 9mm, 3mm, 1mm, 8mm, 11mm, 4mm, 13mm.7
More information #ad
75w water pump with 5m pipepump length:3. 2m; voltage:105-120vac; flow:3000l/h; Size:150x80x140mm. 4 this spindle motor kit applied to Lathes, Mills, Pumps and Conveyors, Car Hoists, etc.2. 2kw 110v water cooled spindle motor er20 colletnotice: 1 the spindle speed can't lower than 9000rpm!!!! 2 This spindle only supports clockwise rotation, not reverse rotation.| Brand | RATTMMOTOR #ad |
| Manufacturer | Chang Sheng #ad |
| Part Number | GDZ80-2.2 |
More information #ad
6. Zhong Hua Jiang
#ad1Set DIY 110V 1.5KW Air Cooled Spindle Motor Square CNC router CNC motor CNC spindle + 110V 1.5KW VFD Inverter + 13PCS Collet ER11+ Aviation wire + Drill Bits+wrench, Zhong Hua Jiang Spindle Motor
#adIt includes wire and 2 wrenches to connect spindle motor with VFD. It will take just 5 minutes to install all and make all functions running.
More information #ad
Warranty assurance-we have 20 years manufacturing experience in this field, pls contact us, any question or problem, we will get you satisfied and get all problems resolved. Advantage - authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0005mm beyond expectation. Application-wood/plastic/aluminum carving/engraving machine, advertisement engraving machine, CNC router machine, small sized processing center, high speed centrifuge etc.
| Brand | Zhong Hua Jiang #ad |
| Manufacturer | Huajiang Electric #ad |
| Part Number | Zhj1500ss |
More information #ad
7. MYSWEETY
#adMYSWEETY 110V 1.5KW Water Cooled Spindle Motor CNC Spindle Motor +1.5KW Converter + 65MM Clamp Mount + 13pcs ER11 Collet + 5M Water Pipe + 110V Water Pump
#adMore information #ad
The spindle motor applied to Lathes, Mills, Pumps & Conveyors, Car Hoists, etc. Package include: 1x1. 5kw spindle motor, 13 x er11 collet1, 1x1. 5kw/110v hy inverter, 5. 5, 1. 5, 4, 6. 5, 2, 1x 5m water pipes, 2.5, 4. 5, 1x 65mm spindle clamp, 3, 6, 1x 3.2m water Pump, 3. 5, 5, 7mm.| Brand | MYSWEETY #ad |
| Manufacturer | MYSWEETY #ad |
| Part Number | 1.5KW Water Cooled Spindle Motor |
More information #ad
8. Zhong Hua Jiang
#adZhong Hua Jiang CNC Spindle Motor Kits, 110V 1.5KW Water Cooled Spindle Motor +1.5KW VFD+ Φ65mm Clamp Mount +Water Pump+ Water hose+ER11 Collet kit + Drill bits+ wires+wrenches for CNC Router machine
#adEasy and fast to install -the vfd had been pre-programmed for basic parameters, you don't need to make extra setting up. We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running.
More information #ad
Advantage -very quiet; use ordinary water as a coolant ;authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0005mm that 10 times precision beyond normal other spindle motor. Package include-1pcs 110v 1. 5kw water cooled spindle motor +1pcs 110v 1. 5kw vfd inverter+ 1pcs Φ65mm clamp mount +13pcs er11 collet1mm-7mm +1pcs Water Pump+ 10 meter Water hose +10Pcs Nano Blue Coat End Mill CNC Router Bits, 08-3mm, 1/8" shank+ aviation wire+power wire+2pcs wrenches.
| Brand | Zhong Hua Jiang #ad |
| Manufacturer | Huajiang Electric #ad |
| Part Number | zhjw1500rss |
More information #ad
9. RATTMMOTOR
#adRATTMMOTOR CNC Spindle Motor Kit, 2.2KW 80mm Water Cooled Spindle Motor 220V ER20 400Hz 24000RMP+2.2KW VFD Inverter 220V+80mm Spindle Motor Mount Clamp+14pcs ER20 Collets+80W 220V Water Pump+5M Pipe
#ad14pcs/set er20 colletssize: 3. 175mm, 1mm, 11mm, 2mm, 12mm, 10mm, 7mm, 6mm, 9mm, 5mm, 3mm, 4mm, 8mm, 13mm.3 runout off: less than 002mm; accuracy: 0003--0005mm; speed:0-24000rpm; frequency: 0-400Hz. 4 this spindle motor kit applied to Lathes, Car Hoists, Mills, Pumps and Conveyors, etc.7
More information #ad
75w water pump with 5m pipepump length:3. 2m; voltage:220-240vac; flow:3000l/h; Size:150x80x140mm. 2. 2kw 220v vfd cnc spindle motor inverterinput voltage: 220v+/-15%; output voltage:208-240vac; input Frequency: 48-63 Hz; Output Frequency: 0-400 Hz; Input Phase: 1phase; Output Phase: 3 phase.| Brand | RATTMMOTOR #ad |
| Manufacturer | Chang Sheng #ad |
| Weight | 10.21 Pounds |
| Part Number | GDZ80-2.2 |
| Model | GDZ80-2.2 |
More information #ad
10. Zhong Hua Jiang
#ad110V 2.2KW Water Cooled Spindle Motor +2.2KW VFD+Φ80mm Clamp Mount +Water Pump+ Water hose+13PCS ER20 Collet + Drill bits+ wire +wrenches for CNC Router machine, Zhong Hua Jiang CNC Spindle Motor Kits
#adPackage include-1pcs 110v 2. 2kw water cooled spindle motor +1pcs 110v 2. 2kw vfd inverter+ 1pcs Φ80mm clamp mount +13pcs er20 collet1mm-13mm +1pcs Water Pump+ 10 meter Water hose +10Pcs Nano Blue Coat End Mill CNC Router Bits, 08-3mm, 1/8" shank+ aviation wire+power wire+2pcs wrenches.
More information #ad
Warranty assurance-we have 20 years manufacturing experience in this field, pls contact us, any question or problem, we will get you satisfied and get all problems resolved. Application-wood/ copper/brass/aluminum/pvc/plastic/carving/Engraving machine, advertisement engraving machine, small sized processing center, CNC router machine, high speed centrifuge etc. Easy and fast to install -the vfd had been pre-programmed for basic parameters, you don't need to make extra setting up. We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running.
| Brand | Zhong Hua Jiang #ad |
| Manufacturer | Huajiang Electric #ad |
| Part Number | zhjw2200rss |
More information #ad
