Top 10 Circular Saw Guide – Circular Saw Accessories

As an Amazon Associate I earn from qualifying purchases.



Kreg Rip-Cut Circular Saw Guide

KREG #ad - Take your saw to the material instead of having to take your material to the saw. Make rip cuts and crosscuts up to 24" Wide. Cut multiple pieces to the same size With just one setup. Use the oversize edge guide for precise control throughout the cut. Eliminate need for marking, measuring, and layout lines.
BrandKREG #ad
ManufacturerKreg #ad
Height2.5 Inches
Length30.88 Inches
Weight2.45 Pounds
Width8.75 Inches
Part NumberKMA2685
Warranty90 day warranty

2. Milescraft Inc.


Milescraft 14000713 Saw Guide for Circular and Jig Saws

Milescraft Inc. #ad - Extends saw blade up to 9. 5″ from edge of workpiece with Jigsaws. Incremental trim feature makes tool-free adjustments by 1/16 inch. 4 metal bars and special clips accommodate most circular and jig saws. Cuts circles from 4″ to 19″ in diameter. Extends saw blade up to 6″ from edge of workpiece with Circular Saws.
BrandMilescraft Inc. #ad
ManufacturerMilescraft Inc. #ad
Height16.3 Inches
Length1.3 Inches
Weight1 Pounds
Width7.3 Inches
Part Number1400
WarrantyThree-Year Limited Warranty

3. Bora


50 in. Size, Aluminum, Bora, 543050, Clamp Edge

Bora #ad - Straight cuts– this rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. The locking handle grabs surfaces for a secure edge that won't budge.

Its long 50-inch length allows you to saw with precision and skill. Contractor's companion - this tool is made for use with the Bora WTX saw plate sold separately, routers, and can be conveniently paired with your own circular saws, Jig saws, and other power tools. Length addition – modular design allows for additional extrusions sold separately to be added, which can increase the length up to 100 inches. With the wtx clamp edge, you’ll save time and eliminate waste due to crooked, uneven cuts. Locked in - the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially plywood sheets.
BrandBora #ad
ManufacturerBora #ad
Height1.5 Inches
Length65 Inches
Weight2.4 Pounds
Width3 Inches
Part Number543050



Kreg KMA2700 Circular Saw Track

KREG #ad - Hold track in place without clamps thanks to anti-slip guide strips. Simply align the guide Track with your marks to make accurate cuts. Rip, mdf, and make angled cuts up to 50" Long in plywood, crosscut, and panels. Prevent splintering with anti-chip strips that support material during the cut. Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,.
BrandKREG #ad
ManufacturerKreg #ad
Height2.5 Inches
Length27.5 Inches
Weight5.05 Pounds
Width8.75 Inches
Part NumberKMA2700
Warranty90 day warranty



Kreg KMA3700 ACCU-Cut XL

KREG #ad - Break down panels and plywood easily and quickly with cutting capacity up to 100". Easily attaches to your left-blade or right-blade circular saw, and removes easily. Make the cuts you need – anywhere – by taking your saw to the workpiece instead of bringing the workpiece to a fixed saw location. No clamps needed thanks to Anti-slip guide strips that keep the track in place through the entire cut. Splinter-free cuts with tear-out protection from anti-chip guide strips.
BrandKREG #ad
ManufacturerKreg #ad
Height3.88 Inches
Length28 Inches
Weight11 Pounds
Width8 Inches
Part NumberKMA3700

6. E. Emerson Tool Co


E. Emerson Tool Co. C50 50-Inch All-In-One Contractor Straight Edge Clamping Tool Guide

E. Emerson Tool Co #ad - But it will not work with A, or Ultra Series accessories. No c-clamping - no more c-clamping! Achieve that truly straight cut using this self-clamping straight edge to guide your tools.

Extra wide - this self clamping straight edge is extra wide for exceptional rigidity and has a low profile for obstruction-free cuts. Emerson’s contractor series self-clamping straight edge patented design has integral tubes running the length of the wide body construction, making it ultra rigid and light to handle. Flat top - the extra low profile and flat top makes it easier for all circular saw or router straight cuts. Straight edge - e. Contractor series - please note: recessed tracks accept Contractor Series Saw Plate, Router Plate, Twin, and Stop Block.
BrandE. Emerson Tool Co #ad
ManufacturerE. Emerson Tool Co #ad
Height3.5 Inches
Length1.8 Inches
Weight1.76 Pounds
Width60 Inches
Part NumberC50

7. Skil


SKIL 5280-01 15-Amp 7-1/4-Inch Circular Saw with Single Beam Laser Guide

Skil #ad - Arbor size: 5/8 inches, cord length: 6 feet. Dust blower keeps line-of-cut free of sawdust for improved visibility. Anti-snag lower guard reduces snags when making narrow cut-offs. Spindle lock for easy blade changes. Powerful 15-amp motor delivers 5, 300-RPM for greater speed and faster cuts. 51 degree bevel capacity for a wide variety of cuts. Lightweight 6. 95-lb design reduces fatigue. 7-1/4-in carbide-tipped blade included.
BrandSkil #ad
ManufacturerSKIL #ad
Height8.5 Inches
Length14.25 Inches
Weight8.7 Pounds
Width9.75 Inches
Part Number5280-01

8. WEN


WEN CT9502 100-Inch Track Saw Track Guide Rail and Adapters

WEN #ad - Designed to fit the weN CT1065 Plunge Track Saw. Includes two 50-inch track saw tracks and a set of adapters. Universal design compatible with Evolution, Makita and Festool track saws. Included adapter set features four set screws for maximum stability. Make straight and precise cuts over 8 feet long.
BrandWEN #ad
ManufacturerWEN #ad
Part NumberCT9502

9. Makita


Makita 194368-5 55-Inch Guide Rail

Makita #ad - Also use with select routers and saws using router adapter 194579-2 and saw adapter 196953-0 Ideal for ripping sheet material. 55" guide rail to be used with Makita SP6000J/J1 Plunge Saw. Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting.
BrandMakita #ad
ManufacturerMakita #ad
Height0.43 Inches
Length55.11 Inches
Weight6.61 Pounds
Width7.28 Inches
Part Number194368-5

10. Bora


Bora 100" NGX Clamp Edge | Straight Cut Guide For Circular Saws | 50" Clamp Edge & 50" Extension For 100" Cutting Length | 544100

Bora #ad - Use with circular saws, routers, Jig saws, and other portable power tools. Made of heavy-gauge, rigid aluminum for extreme durability. Includes bora ngx 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors. Clamping end moves with handle for easy adjustability from one side. Locking handle grabs work surfaces for a secure grip that won’t budge.
BrandBora #ad
ManufacturerBora #ad
Height3.5 Inches
Length80 Inches
Width3 Inches
Part Number544100
Warranty1 year