As an Amazon Associate I earn from qualifying purchases.
1. WEN #ad
WEN 3921 16-inch Two-Direction Variable Speed Scroll Saw #adWEN #ad
- Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position. Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts. Unique design accepts blades in two directions standard and 90 degrees to allow for infinite ripping capacity.
Variable speed goes from 400 to 1600 strokes per minute. Features a thumb screw blade adapter for tool-free blade changes, a flex light, a foot lock clamp, a dust port, a cast iron base, an air pump, onboard storage, and three blades.
2. WEN #ad
WEN 3922 16-inch Variable Speed Scroll Saw with Easy-Access Blade Changes #adWEN #ad
- Spacious 16-by-10-inch table bevels up to 45 degrees for angled cuts. Variable speed goes from 550 to 1600 strokes per minute. Unique side panel flips open for easy-access blade changes.
Cuts wood up to 2 inches thick with a 16-inch throat depth. Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, a foot lock clamp, a dust port, an air pump, and three 5-inch blades.
3. Skil #ad
Red and black, SKIL 3601-02 Flooring Saw with 36T Contractor Blade #adSkil #ad
- Makes cross, miter and rip cuts. Die-cast aluminum miter and rip fence. Cuts solid, engineered and laminate flooring with ease. Lightweight design for transport and use at any project location. Miter detents at 0, 22. 5 and 45 degrees.
|Manufacturer||Chervon- SKIL #ad|
4. Skil #ad
Red, SKIL 3540-02 7-Inch Wet Tile Saw #adSkil #ad
- Cross cut capacity: 7. 75-inch; diagonal cut capacity: 7. 25-inch. Bevel cuts tile from 0 to 45 degrees. Blade cooling water reservoir to keep blade cool while minimizing dust and debris.
Cut material: Stone/Masonry. Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch. Adjustable rip fence with miter gauge for accurate straight and miter cuts.
5. DEWALT #ad
20-Inch DW788, Variable-Speed, 1.3 Amp, DEWALT Scroll Saw #adDEWALT #ad
- Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation. Depth of Cut inches: 2 inch. On off switch, electronic variable speed, flexible dust blower, and blade tensioning lever all located on front upper arm.
Arm lifts so blade can be easily threaded through the material for inside cuts. Exclusive tool free blade clamps allow blade changes in seconds. Double parallel link arm design dramatically reduces vibration and noise for extremely accurate cuts.
|Warranty||3 Year Limited Warranty|
6. WORX #ad
WORX WX572L BladeRunner x2 Portable Tabletop Saw #adWORX #ad
- Do it with worx. Great at cross & rip cuts the steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts. Do it yourself. Truly portable table saw weighing in at less than 15 lbs.
You easily can move it around your workshop or even take it to the job site. Do it better. Worx tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last.
Accessories included 5 blades woods, steel rip fence, ceramic tile, dust extraction port, miter gauge, aluminum, scrolling, and blade grip.
Safety switch an added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts. Adjustable miter gauge makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
7. MOCOUM #ad
Aluminum Alloy Single Handle Right Angle Clip Clamp Tool with Adjustable Swing Jaw for Carpenter Welding Woodworking Photo Frame Vise Holder Grey, MOCOUM 90 Degree Corner Clamp #adMOCOUM #ad
- Wide applicationthis wood corner clamp can used as a clamping device for 90° corner joints. Perfect for aligning, screwing, making cabinets, welding, nailing, woodworking, box and picture frames.
Whether for professional use or DIY use, our aluminum corner clamp is absolutely good choice for you. Allows two wood block of different thicknesses to be joined at a 90 degree angle.
Perfect 90° cornersthis 90 degree clamping square tool convience 90 Degree Right Angle woodwork and save your time. Our corner clamp jig is essential in ensuring balanced project outcomes.
High quality materialthis 90 corner clamp is made of high quality aluminum alloy die-casting based construction that insures optimal Durability. 90 degree angle clampthis single handle jaw can be rotated in two-way, making clamping more convenient and holding work pieces precisely. Easy to usethe anti-skid handle is nicely covered with rubber to ensure users' comfort.
8. POWERTEC #ad
12130, POWERTEC 20305 Quick Release Toggle Clamp Vertical w Rubber Pressure Tip – Hold Down Hand Tool 500 lb Holding Capacity #adPOWERTEC #ad
- Design: this heavy duty vertical toggle clamp is constructed from cold-rolled carbon steel, a flanged base, possessing a low profile design, and colored vinyl grip for easy identification.
Holding capacity: Vertical clamp can hold up to 200 lbs. Includes: 1 vertical Handle Toggle Clamp 12130 Clamp specs: 1-3/8” x 1-7/8 | mounting holes: 1/4” spaced apart 1-1/4” x 1- 5/16”| Bolt length, including rubber foot: 2-1/2”.
Function: an essential woodworking hand tool addition to your jig assembly, delivering dependable and secure vertical hold down clamp action for your work pieces, jigs and fixtures.
9. Megacast #ad
Megacast 3 in 1 Professional Jeweler's Saw Set Saw Frame 144 Blades Wooden Pin Clamp Wood Metal #adMegacast #ad
- Saw frame with tension nut specs:overall length: 8-3/4'' long; Rail size: 8mm Wide x 2. 86mm Thick. Quantity : 1 set ; Shipping weight: 1 lb. V-slot bench pin & clamp with saw groove specs:dimension: 8-1/4" x 2-1/4"; v- slot depth :3-1/2"; metal & wood body ; 144 pc piercing saws specs:Steel body; Size: 1/0, 2/0, 1, 4/0, 3/0, 2 ; Fits 6” Saw.
Included: jeweler's saw frame with tension nut, v-slot bench pin with clamp, and 144 pc piercing saws. 3 in 1 small professional jeweler's saw set.
10. Rockwell #ad
Rockwell RK7323 BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge & 7 Accessories #adRockwell #ad
- Sets up in seconds take this table saw to the job site or move it around the workshop. Tool-less blade change uses any brand’s standard 4” t-shank blade, aluminum, but we threw 5 in the box to get you started cutting wood, ceramic tile, plastic, and metal.
On-board accessory storage when the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw. Cuts like a full-size with the standard guard and riving knife system you can perform rip, scroll, cross, and miter cuts.
Safety switch prevents accidental starting, plus the vacuum port lets you hook up a shop vac that cleans while you cut. 0-60° miter cuts with the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects. There’s even a built-in carry handle.
|Manufacturer||Positec USA #ad|
|Warranty||3 year Limited Consumer Warranty|