Top 10 Booster pump RO – Under-Sink & Countertop Filtration

As an Amazon Associate I earn from qualifying purchases.

1. Aqua Tec

#ad

Aquatec 6800 Booster Pump Kit for up to 100 GPD home RO reverse osmosis water filter system Standard or Manifold, 6840-2J03-B224 B221 Made In USA, transformer, includes pump, pressure switch PSW-240

#ad
Aqua Tec #ad - The pressure switch would sense the pressure in the output line, so when the output line is shut off or the storage tank is full or reaches 40-50 psi, and then when you start using water and tank pressure drops, the pump would shut off, then the pump turns back ON to replenish the tank.

This pump kit is designed for increasing water supply pressure to a RO water system. Automatic on/off operation. This pump kit includes aquatec pump 6840-2j03-b224 with heavy duty steel base plate with damper, transformer 110V USA plug, 1/4" inlet/outlet for pump and pressure switch, PSW-240 pressure switch, detail instruction. This pump is designed to increase the water supply pressure to a ro water system. This pump is good for under 100 gpd gallons per day RO systems Most home drinking RO systems are under 100 GPD.

Increase input pressure from 30-40 psi to 60-80 psi depending on the capacity of your RO system. This kit does not come with the optional eso electric-shut-off solenoid valve, so it would reply on your existing mechanical auto-shut-off valve in your RO system to turn off the water supply when the tank is full. For most systems this kit will work fine. This kit is not for misting, ice maker line, line boosting, water transfer.
BrandAqua Tec #ad
ManufacturerAquatec #ad
Part NumberSET68-PSW240

2. AQUATICLIFE

#ad

AQUATICLIFE Smart Buddie Booster Pump for 50-100 GPD Reverse Osmosis Systems

#ad
AQUATICLIFE #ad - A built-in low pressure switch turns off the smart buddie booster pump if water pressure is less than 7. 25 psi, extending the life of the pump. Increased water pressure improves the efficiency of the unit less waste water as well as the quality of the water; RO units thrive on pressure.

Note: all smart buddie booster Pumps are water tested at the factory before packaging so there might be some water inside the unit when unboxed. The smart buddie booster pump includes an internal automatic flush valve that flushes the membrane for 18 seconds every time the unit is activated. The smart buddie booster pump is quiet, easy to install, and can significantly increase water output and improve water quality. The sealed pressure pump is low-voltage and powered by the included transformer, which ensures safe, quiet operation.
BrandAQUATICLIFE #ad
ManufacturerAquatic Life #ad
Height7.75 Inches
Length11.75 Inches
Weight7.7 Pounds
Width5.75 Inches
Part Number540292
Model540292
WarrantyManufacturer Warranty

3. Aqua Tec

#ad

Aquatec 8800 Booster Pump Kit for up to 200 GPD RO Reverse Osmosis water filtration system for both standard and manifold type systems 8852-2J03-B424 PSW-340 Made in USA

#ad
Aqua Tec #ad - Increase input pressure from 30-40 psi to 60-80 psi depending on the capacity of your RO system. The pressure switch would sense the pressure in the output line, the pump would shut off, and then when you start using water and tank pressure drops, so when the output line is shut off or the storage tank is full or reaches 40-50 psi, then the pump turns back ON to replenish the tank.

This pump is good for under 200 GPD gallons per day RO systems. This kit does not come with the optional eso electric-shut-off solenoid valve, so it would reply on your existing mechanical auto-shut-off valve in your RO system to turn off the water supply when the tank is full. Automatic on/off operation. This pump kit includes aquatec high flow booster pump 8852-2j03-b424 with heavy duty steel base plate with damper, PSW-340 pressure switch, 4 reducer fitting 3/8" to 1/4", 110V Transformer, detail instructions.

For most systems this kit will work fine. This kit is good for 1/4" od tubing or 3/8" od tubing since we include 3/8" to 1/4" reducer fittings for pump and for pressure switch. This pump is designed to increase the water supply pressure to a ro water system.
BrandAqua Tec #ad
ManufacturerAquatec #ad
Height4 Inches
Length7 Inches
Width4 Inches
Part Number8852SET-PSW

4. Geekpure

#ad

Geekpure Booster Pump + Transformer + High and Low pressure switches + Fittings Kit for Reverse Osmosis System-Pack of 7

#ad
Geekpure #ad - It increases the production of your current RO to fill the tank faster. Responsable manufacturer- iso9001:2008 certificated Manufacturer, also Member of Water Quality Association WQA.

Pack of 7, booster pump + transformer + high and low pressure switches +2 Quick fittings + 1 Roll teflon seal tape. It comes with everything needed to hook up to your existing water filtration device. Transformer: input:100-240v ac, output: 24v dc. 1. 5 a. Note:if you don't know how to connect it, US plug, please search User Manual or Technical Specification on this page.

Booster pump kit: a booster pump for reverse osmosis system 50gpd or 75gpd, designed for use in areas with water pressure lower than 40 PSI. This pump is quiet, easy to install, Turn your existing RO in to a 100 percent efficient treatment system. The water filtration booster pump kit is of opening size 105 x 6 x 6 inches. 1 year limited warranty.
BrandGeekpure #ad
Manufacturergeekpure #ad
Weight5 Pounds

5. APEC Water Systems

#ad

APEC Water Systems RO-PUMP-120V Top Tier Ultra Safe Reverse Osmosis Drinking Water Filtration System with US Made Booster Pump

#ad
APEC Water Systems #ad - Supreme quality – designed, engineered and assembled in USA to guarantee water safety & your health. Remove up to 99% of contaminants including arsenic, bacteria, heavy metals, fluoride, chlorine, lead, virus and 1000+ contaminants.

Top tier us brand, high performance Drinking water system provides refreshing crisp taste, superior to bottled water. Us made ultra quiet pump, for low pressure homes 0 - 30 psi, to maximize input water pressure and accommodates the well water and overseas applications where standard RO systems would not function. Highest grade 5-stage ultra-pure system with 100% US made filters to guarantee water safety & your health.
BrandAPEC Water Systems #ad
ManufacturerAPEC Water Systems #ad
Height24 Inches
Length23 Inches
Weight33 Pounds
Width12 Inches
Part NumberRO-PUMP-120V
ModelRO-PUMP-120V

6. Aqua Tec

#ad

Black, Aqua Tec 8852-2J03-B423 Aquatec CDP 8800 Water Booster Pump + Transformer 115V 1/4 & 3/8

#ad
Aqua Tec #ad - For boost the water supply pressure for RO reverse osmosis water systems. Transformer is usa standard 115V 60Hz, us plug. 8852 model is higher flow than 8851 version. Aquatec cdp 8800 pressure boost pump. Use for 100gpd to 200gpd rO systems and some misting systems.
BrandAqua Tec #ad
Manufactureraquatec #ad
Height4 Inches
Length12 Inches
Weight7 Pounds
Width4 Inches
Part Number8852-2J03-B423
Model8852-2J03-B423
Warranty1 year manufacturer limited warranty offer by Aquatec

7. Aqua Tec

#ad

Booster Pump 10-36 GPD 6840-2J03-B221

#ad
Aqua Tec #ad - Pump only 24VAC transformer not included. Made in usa, nsf ceritied and designed for drinking water, food processing. 1/4" quick connect fitting,. Boost water supply pressure for 18GPD to 100GPD reverse osmosis water systems 30 to 40psi boost. Very quiet, efficient, run dry without damage, self priming, use only 24 watts, diaphragm pump.
BrandAqua Tec #ad
ManufacturerAquatec #ad
Height5 Inches
Length5 Inches
Weight5 Pounds
Width7 Inches
Part Number6840-2J03-B221
Model6840-2J03-B221

8. Aquatec

#ad

Aquatec 8800 Booster Pump with Transformer

#ad
Aquatec #ad - 24 watts, quiet operation, transformer 2 amp, 24VAC to 115VAC 60Hz USA plug. Open flow rate 2. 6 liter per minute, adjustable internal bypass valve, 80 psi bypass pressure. Includes 2 reducer elbow fitting 3/8" to 1/4" for 1/4" tubing. 3/8" quick connect inlet and outlet for 3/8" tubing.
BrandAquatec #ad
ManufacturerAquatec #ad
Part NumberRD-KCPT-W2JB

9. LEFOO

#ad

LEFOO RO booster pump LFP1200W 200GPD for Reverse Osmosis water filtration system with transformer

#ad
LEFOO #ad - Safe power operation with, low energy low voltage - 24 volt. Reverse osmosis 200GPD Diaphragm booster pump. Self-priming height:≥1. 8m. Easy installation. Transformer included. Increase your membrane performance if your municipality water pressure PSI rated low. Work flow rate: >1900ml/m. Open flow rate: >2500ml/M. Work temperature:5°C-40°C.
BrandLEFOO #ad
ManufacturerZhejiang LEFOO controls Co.,Ltd. #ad
Height3.94 Inches
Length8.23 Inches
Weight5.07 Pounds
Width4.02 Inches
Part NumberLFP1200W

10. Hydro-Logic

#ad

Hydro-Logic 29020 Pressure Booster Pump-Stealth-RO100/200 with transformer and pressure switch,Black and White

#ad
Hydro-Logic #ad - It boosts the pressure significantly, allowing The Stealth-Ro To Run With Higher Flow, More Efficiency While Having Better Tds Removal. This pump is designed to be installed Before The Stealth-Ro To Boost The Inlet Pressure. Wells and low pressure below 40 Psi Water Sources Can Benefit Greatly From This Pump. Brand name: Hydro-Logic.
BrandHydro-Logic #ad
ManufacturerHydraulic Jeans Girls 7-16 #ad
Height6.25 Inches
Length6.5 Inches
Width12.75 Inches
Part NumberHLROBOOSTER
Model29020