As an Amazon Associate I earn from qualifying purchases.
Taytools #ad - The jaw is made from reinforced malleable steel and provides powerful and rigid clamping. The moveable jaw slides easily along the serrated rails and then locks down tight when the handle is tightened offering slip-resistant clamping. The cast zinc base is 1-1/2 inches in diameter and 1-1/2 inches tall.
This clamp will work in tops as thin as 3/4 inch thick. This quick-adjust vertical surface hold down clamp allows you to secure work tightly to your workbench anywhere you can drill 3/4 inch dog holes. The post has machined serrations along its length so when the handle is turned and pressure applied, the post wedges tightly in a dog hole and will not slip.
The screw end has a 1 inch diameter swivel pad with a non-marring clamp pad to allow gripping of odd- shaped parts. Threads are black coated to resist corrosion. The moveable clamp jaw features smooth-turning carbon steel acme threads and can generate up to 600 pounds of clamping pressure. The serrated carbon steel rail has an hourglass profile to resist flexing and twisting. The base and post are black coated to resist corrosion. Overall spindle travel is 2 inches.
POWERTEC #ad - Function: these workbench stops provide a safe, leverage and accessibility for cutting, painting, and secure hold on your wood stock – anchoring them along the edge or on top of your workbench while giving you optimal control, routing, non-marring, and sanding applications.
Also included two 3/16” holes where dowels can be inserted for perfect painter's points. Includes: 8 Workbench Dogs. Premium build: the bench dogs were constructed out of high quality nylon, delivering strength and uniformity, and come with non-slip ethylene vinyl acetate EVA rubber bench brake inserts.
Features: a practical, low-profile design that not only increases the precision of your woodworking projects, but improves the safety of your employees and workpieces as well – including removable padded bench brakes for an anti-slip work surface and a squared clamping pad that delivers a secure fit.
Taytools #ad - Threads and handle are zinc plated for smooth motion and corrosion resistance. The post is 2-5/8” long overall and can extend a full 2 inch into a benchtop. The low-profile design sits just 11/16 of an inch above the surface of your bench, so will not interfere when planning or sanding 3/4 inch thick material.
The head has 2 mounting holes to allow attachment of custom clamp pads. This adjustable in-line bench dog clamp allows you to secure work flat to your workbench anywhere there are 3/4” dog holes.
Both the head and post are black coated to resist corrosion. The post is just shy of 3/4”, so will slip in and out of any 3/4 inch dog hole. Used in conjunction with a plane stop or bench dogs, you can secure virtually any size or shape workpiece anywhere on your bench. The moveable head travels on smooth-turning 10 tpi carbon steel threads that produce high horizontal clamping pressure with the least effort.
Deadwood Crafted Tools #ad - Easy to use: simply insert into your workbench and place material flush against the dogs for a secure hold on your project; Used on tables as a stop for pieces of wood so you can plop the wood onto your workbench with a plane or other tool without the wood dangerously sliding or moving.
Built to last: constructed from black plastic for longevity and rust-resistance; Unlike metal bench dogs, these plastic ones will not mar your woodworking stock; If you accidentally hit these with your prized chisel or plane, you will be glad that they are plastic.
Stabilize your woodworking project: use the dct woodworking plastic bench dogs 4-pack – workbench peg brake Stops for 3/4" Holes in 1/2" Inch or Thicker Material to turn your workbench into a nonslip work platform to provide a flat surface that securely holds your woodworking stock in place for maximize leverage; Ensures stationary workpiece immobility preventing your workpiece from slipping or moving on your workbench so you can safely focus on your project.
Armor-Tool #ad - Use with armor dog fences. With a push bar for a horizontal clamping range of 3. 5". 360 degree rotation. Easy one hand operation. Split dog accommodates 3/4" or 20mm dog holes. Place anywhere a dog table.
KREG #ad - Large clamp faces spread pressure evenly. Compatible with the kreg clamp table, mobile Project Center, Clamp Plates, Track Horse, Clamp Trak, and the Universal Clamp Trak Kits.
Armor #ad - With a 7. 5" tall 3/4" diameter dog peg for a vertical clamping range up to 5. 5" above the table. Easy one hand operation. Auto-adjust clamping technology - no need to adjust Clamp as you change the material thickness.
POWERTEC #ad - Features: a practical, low-profile design that not only increases the precision of your woodworking projects, but improves the safety of your employees and work pieces as well – including removable padded bench brakes for an anti-slip work surface and a squared clamping pad that delivers a secure fit.
Also included two 3/16” holes where dowels can be inserted for perfect painter's points. Specs: total length of each bench dog is 2 inches with a slightly less than 3/4 inch diameter and 1-7/8 inches without the bench brake bump - installs easily by drilling a 3/4” 19mm diameter bench dog hole and simply press into place.
Premium build: the bench dogs were constructed out of high quality nylon, delivering strength and uniformity, and come with non-slip ethylene vinyl acetate EVA rubber bench brake inserts. Includes: 4 workbench dogs.
Deadwood Crafted Tools #ad - Woodworking holdfast set: quickly clamp down your woodworking projects with the dct | 8 inch woodworking Bench Accessories Workbench Holdfast 2 Pack Set; For hundreds of years, bench hold fast hooks have been used to secure wood projects while cutting, carving, and sanding because of their versatility and ease of use; Skip the complicated leg vise hardware and standard clamps that are difficult to adjust and use these simple workbench hold downs.
Quick and easy clamping: slide the bench hold down clamp into your workbench dog hole; Press the tip of the hook against your workpiece and firmly tap the crook of the holdfast with a wooden or rubber mallet to jam the shaft tightly in the hole; Your workpiece is now secure; When you are ready to release the clamp, strike the backside of the vertical shaft to unjam it from the hole.
Ideal for various woodworking jobs: use these work bench clamps for woodworking projects; Hold downs for woodworking provides a strong, routing, planing, drilling, sawing, sanding, sturdy hold to allow hands-free carving, and finishing; Protect softwood from marring by using a piece of scrap wood as padding between your holdfasts and the workpiece. Perfect size for your needs: constructed of drop-forged steel provides these hold fast clamps with maximum durability and strength; 8-inch203cm length with 3/4-inch 1.
1. Taytools
#adTaytools 388091 Quick-Adjust Vertical Workbench Surface Hold Down Clamp, Fits 3/4” Bench Dog Holes
#adThis clamp will work in tops as thin as 3/4 inch thick. This quick-adjust vertical surface hold down clamp allows you to secure work tightly to your workbench anywhere you can drill 3/4 inch dog holes. The post has machined serrations along its length so when the handle is turned and pressure applied, the post wedges tightly in a dog hole and will not slip.
More information #ad
Will clamp parts up to 4 inches thick. The 1-1/2 inch long post is just shy of 3/4 inch, so will slip in and out of any 3/4 inch dog hole. The screw end has a 1 inch diameter swivel pad with a non-marring clamp pad to allow gripping of odd- shaped parts. Threads are black coated to resist corrosion. The moveable clamp jaw features smooth-turning carbon steel acme threads and can generate up to 600 pounds of clamping pressure. The serrated carbon steel rail has an hourglass profile to resist flexing and twisting. The base and post are black coated to resist corrosion. Overall spindle travel is 2 inches.
| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Part Number | 388091 |
More information #ad
2. POWERTEC
#adPOWERTEC 71500 Deluxe Bench Dog | 8 Pack | Non Marring Durable Nylon| With Grommet Bench Brake Inserts Made of Premium Nonslip EVA| For 3/4" Dog Holes | A Woodworking Shop Essential Color May Vary
#adAlso included two 3/16” holes where dowels can be inserted for perfect painter's points. Includes: 8 Workbench Dogs. Premium build: the bench dogs were constructed out of high quality nylon, delivering strength and uniformity, and come with non-slip ethylene vinyl acetate EVA rubber bench brake inserts.
More information #ad
Specs: total length of each bench dog is 2 inches with a slightly less than 3/4 inch diameter and 1-7/8 inches without the bench brake bump - Installs easily by drilling a 3/4” 19mm diameter bench dog hole and simply press into place. Features: a practical, low-profile design that not only increases the precision of your woodworking projects, but improves the safety of your employees and workpieces as well – including removable padded bench brakes for an anti-slip work surface and a squared clamping pad that delivers a secure fit.
| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 1.5 Inches |
| Length | 8 Inches |
| Width | 6 Inches |
| Part Number | 71500 |
| Model | 71500 |
More information #ad
3. Taytools
#adFull 5 Inch Travel, Fits 3/4 Inch Dog Holes, Taytools 388046 Adjustable Workbench Bench Dog Screw Clamp
#adThe head has 2 mounting holes to allow attachment of custom clamp pads. This adjustable in-line bench dog clamp allows you to secure work flat to your workbench anywhere there are 3/4” dog holes.
More information #ad
Will clamp parts up to 4 inches thick. You can clamp parts equally well on the top or edge of a workbench. The clamp head has a full 5” of travel. The handle is a low-profile sliding pin bar design. The 2 inch long x 5/8 inch square moveable head has a v-groove in the center and pivots 2 degrees to accommodate irregular shaped parts. Both the head and post are black coated to resist corrosion. The post is just shy of 3/4”, so will slip in and out of any 3/4 inch dog hole. Used in conjunction with a plane stop or bench dogs, you can secure virtually any size or shape workpiece anywhere on your bench. The moveable head travels on smooth-turning 10 tpi carbon steel threads that produce high horizontal clamping pressure with the least effort.
| Brand | Taytools #ad |
| Manufacturer | Taylor Toolworks #ad |
| Part Number | 388046 |
More information #ad
4. Deadwood Crafted Tools
#adDCT Woodworking Plastic Bench Dogs 4-Pack – Workbench Peg Brake Stops for 3/4in Holes in 1/2in or Thicker Material
#adBuilt to last: constructed from black plastic for longevity and rust-resistance; Unlike metal bench dogs, these plastic ones will not mar your woodworking stock; If you accidentally hit these with your prized chisel or plane, you will be glad that they are plastic.
More information #ad
Contents: package includes 4 bench dogs for your convenience. Various applications: 1-7/16-inch 3. 7cm low profile for 3/4-inch 1. 9cm round hole in a 1/2-inch 1. 3cm or thicker material; for use in light-duty and medium-duty applications such as routing, planing, cutting, and sanding. Stabilize your woodworking project: use the dct woodworking plastic bench dogs 4-pack – workbench peg brake Stops for 3/4" Holes in 1/2" Inch or Thicker Material to turn your workbench into a nonslip work platform to provide a flat surface that securely holds your woodworking stock in place for maximize leverage; Ensures stationary workpiece immobility preventing your workpiece from slipping or moving on your workbench so you can safely focus on your project.
| Brand | Deadwood Crafted Tools #ad |
| Manufacturer | Deadwood Crafted Tools #ad |
| Height | 4.15 Inches |
| Length | 2 Inches |
| Width | 6.5 Inches |
| Part Number | 8865 |
| Warranty | This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details. |
More information #ad
5. Armor-Tool
#adArmor-Tool P7-IL Armor Auto-Adjust In Line Dog Clamp,
#adMore information #ad
Hardened plastic tip with non marring pad. V notch for clamping corners; also holds flat and round surfaces. Adjustable clamping pressure from 25-550 lbs. Auto-adjust clamping technology - no need to adjust Clamp as you change the material thickness. Saves time and hassle.| Brand | Armor-Tool #ad |
| Manufacturer | Armor Tool #ad |
| Height | 5.22 Inches |
| Length | 8.5 Inches |
| Weight | 1.21 Pounds |
| Width | 2.1 Inches |
| Part Number | P7-IL |
| Model | P7-IL |
| Warranty | 1 year limited warranty against defects in Material and Workmanship |
More information #ad
6. KREG
#adKREG TOOL KBC6 Automaxx Bench Clamp, 6"
#adMore information #ad
6" reach 152mm; clamps materials up to 5" thick 127mm. Easy-to-regulate pressure with a simple thumbscrew. Adjusts automatically to match material thickness. Package dimensions:16. 25"l x 5. 12"w x 1. 75"h. Ergonomic padded grips prevent hand fatigue.| Brand | KREG #ad |
| Manufacturer | KREG TOOL #ad |
| Height | 1.75 Inches |
| Length | 16.25 Inches |
| Weight | 1 Pounds |
| Width | 5.12 Inches |
| Part Number | KBC6 |
| Model | KBC6 |
More information #ad
7. Armor
#adArmor-Tool P7-HH Auto-Adjust Hold Down Dog Clamp
#adMore information #ad
Adjustable clamping pressure from 25-400 lbs. Interchangeable 7. 5" 20mm dog peg sold separately, and 3" dog peg in 3/4" or 20mm for tables with short depth restriction. Full 360 degree rotation with a pivoting spindle to accommodate variations in material shape. Saves time and hassle.| Brand | Armor #ad |
| Manufacturer | Armor Tool #ad |
| Height | 3.74 Inches |
| Length | 9.37 Inches |
| Weight | 1.5 Pounds |
| Width | 1.65 Inches |
| Part Number | P7-HH |
| Model | P7-HH |
| Warranty | 1 year limited warranty against defects in Material and Workmanship |
More information #ad
8. POWERTEC
#adPOWERTEC 71188 Deluxe Bench Dog | 4 Pack | Non Marring Durable Nylon| with Grommet Bench Brake Inserts Made of Premium Nonslip EVA| For 3/4" Dog Holes | A Woodworking Shop Essential Color May Vary
#adAlso included two 3/16” holes where dowels can be inserted for perfect painter's points. Specs: total length of each bench dog is 2 inches with a slightly less than 3/4 inch diameter and 1-7/8 inches without the bench brake bump - installs easily by drilling a 3/4” 19mm diameter bench dog hole and simply press into place.
More information #ad
Function: these workbench stops provide a safe, and secure hold on your wood stock – anchoring them along the edge or on top of your workbench while giving you optimal control, Painting, non-marring, leverage and accessibility for cutting, routing, and sanding applications. Premium build: the bench dogs were constructed out of high quality nylon, delivering strength and uniformity, and come with non-slip ethylene vinyl acetate EVA rubber bench brake inserts. Includes: 4 workbench dogs.
| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 1.5 Inches |
| Length | 6 Inches |
| Width | 4 Inches |
| Part Number | 71188 |
| Model | 71188 |
More information #ad
9. WORX
#adWORX 4pc Clamp Dog Set WA0091
#adWORX #ad - Package dimensions: 3. 556 cms l x 8. 636 cms w x 11. 684 cms H. Country of Origin: China. Product type: Hardware Clamp Vise. Package Quantity: 1.More information #ad
| Brand | WORX #ad |
| Manufacturer | Worx #ad |
| Height | 2.5 Inches |
| Length | 1.5 Inches |
| Width | 1 Inches |
| Part Number | WA0091 |
| Model | WA0091 |
More information #ad
10. Deadwood Crafted Tools
#adDCT Bench Holdfast Woodworking Tools – 8in Bench Holdfast Clamps Woodworking Bench Holddown Clamps, 2 Pack
#adQuick and easy clamping: slide the bench hold down clamp into your workbench dog hole; Press the tip of the hook against your workpiece and firmly tap the crook of the holdfast with a wooden or rubber mallet to jam the shaft tightly in the hole; Your workpiece is now secure; When you are ready to release the clamp, strike the backside of the vertical shaft to unjam it from the hole.
More information #ad
Use with your workbench: works best on workbenches with a 2. 5 6. 4cm thickness; Drill 3/4 inch 1. 9cm vertical dog holes into your workbench top and slide your holdfast workbench clamps into the hole; We suggest filing the shank to increase hold security. Ideal for various woodworking jobs: use these work bench clamps for woodworking projects; Hold downs for woodworking provides a strong, routing, planing, drilling, sawing, sanding, sturdy hold to allow hands-free carving, and finishing; Protect softwood from marring by using a piece of scrap wood as padding between your holdfasts and the workpiece. Perfect size for your needs: constructed of drop-forged steel provides these hold fast clamps with maximum durability and strength; 8-inch203cm length with 3/4-inch 1.
| Brand | Deadwood Crafted Tools #ad |
| Manufacturer | Deadwood Crafted Tools #ad |
| Height | 2 Inches |
| Length | 8.3 Inches |
| Weight | 2.49 Pounds |
| Width | 6 Inches |
| Part Number | 3266 |
| Warranty | This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details. |
More information #ad
