Top 10 4Pin Light Socket Adapter – Light Sockets

As an Amazon Associate I earn from qualifying purchases.

1. E-Simpo

#ad

Need Rewire to Bypass Ballast. 2-Pack, 2pcs E-Simpo 4Pin Gx24q to E26/E27 Light Socket Adapter Lamp Base Converter. NOT PLUG AND PLAY

#ad
E-Simpo #ad - Pbt housing, copper contact. Suitable for all voltage: 100-240v, works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube;G24q-2 Base:18w Quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube.

Physically change the socket contact, twist into existing gx24q socket and transform the fixture to fit any standard E26 E27 medium size bulb. Do not operate the led bulb with ballast in the fiXTURE. So the best thing is bypass or remove once we want to change CFL to LED Lamp. 2pcs/lot, gx24q-2, sample pack. With base depth is 15. 5mm/06 inches. Not for diy!!! need rewiring! removing or bypassing the ballast inside the light fixture is required.

Doing so will likely damage the bulb. Short version 4pins, gx24q-1, suitable for G24Q-1, G24Q-2. G24q-3, gx24q-3 socket;. When we remove pin-based CFL, we only removed the lamp, the light will not work. There are some led driver who can be compatible with the ballast, there will be 2 ballasts, the ballast is still working in front fixture; even we change to E26/E27 CFL, no LED Driver can be compatible with all the ballast.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Weight66 Grams

2. AC

#ad

LED Light Sockets Adapter, G24 to E26 E27 Lamp Base Converter, Lamp Holder Converters with Short Shaft Pack of 10, 4-Pin Light Bulb Socket, Bulb Base Adapter

#ad
AC #ad - Suitable for multiple voltagesNote: it can not transfer the voltage, just the socket converter. Easy to install, plug and play. The ballast in your fixture must be removed or bypassed for these adapterS TO FUNCTION PROPERLY. Please bypass or remove the ballast when you use, otherwise the bulb doesn't light on.

G24 base to e26/e27 light sockets adapter converter can be used to transforms G24 fixture to fit standard the E26 / E27 medium size bulb in any. When we remove pin-based CFL, the light will not work. Material: flame resistant pbt. So the best thing is bypass or remove once we want to change CFL to LED Lamp. Works with led / halogen / CFL light bulb lamps. It fits any standard medium bulb to the G24 and enables almost all commonly found bulbs to work with the output.

This adapter with SHORT shaft. There are some led driver who can be compatible with the ballast, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, there will be 2 ballasts, no LED Driver can be compatible with all the ballast. Ideal for home use. Please check your bulb size, and refer on our adapter detailed size on the left picture before you purchase.
BrandAC #ad
ManufacturerAC #ad

3. E-Simpo

#ad

12pcs E-Simpo 4Pin GX24Q to E26/E27 CFL Bulb Socket Lamp Base Lampholder Adapter Converter,Physically Change Contact, Need Rewire to Bypass Ballast. 12-Pack

#ad
E-Simpo #ad - Suit for g24q-1, g24q-2. G24q-3, gx24q-3 socket;works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube;g24q-2 base:18w quad tube;gx24q-2 base:18w triple tube;g24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube; If your socket is 2P, gx24q-1, GX24q-2, buy: https://www.

Amazon. Com/dp/b017t1ujee Physically change the contact. G24q series female socket fixture to e26 male Bulb Base Adapter - Q series has a shorter tip than D series and is more common in the US. So the led driver input should be 100V-240V or 85-265V, and easily destroy the led lamp. When we remove pin-based CFL, we only removed the lamp, the light will not work. So the best thing is bypass or remove once we want to change CFL to LED Lamp. Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb. The ballast in your fixture must be removed or bypassed for these adapters to function properly.

Ballast is a must to start a high voltage600V-1500V 1ms to light up the CFL, but it is dangerous for LED Lamp. There are some led driver who can be compatible with the ballast, the ballast is still working in front fixture; even we change to E26/E27 CFL, there will be 2 ballasts, no LED Driver can be compatible with all the ballast. All pin-based cfl, like gx24q g24 gx23 g23 are lamp-ballast separated, so 600-1500v will be too high, but all screw-in e26 e27 are lamp-ballast integrated.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Part NumberGX24Q-E27
Warranty100% work perfectly! You need remove the ballast inside the front head fixture!

4. E-Simpo

#ad

4pcs E-Simpo 4-Pin GX24Q to E26/E27 Light Socket Adapter Need Bypass Ballast CFL G24Q 4P Lamp Base to Standard LED E26 e27 Lamp Base Holder Converter PBT Housing Rohs

#ad
E-Simpo #ad - Consult an electrician if you are unsure. Suit for g24q-1, gx24q-2, gx24q-3 socket; if your socket is 2p, gx24q-1, g24q-2. G24q-3, buy: https://www. Amazon. Com/dp/b017t1ujee Physically change the contact. 4pcs. 4pin gx24q, not for 2p; need bypass or remove the ballast, all phenom like smell smoke flicker burnt are caused by ballast which is not required for LED Lamps.

G24q series female socket fixture to e26 male Bulb Base Adapter - Q series has a shorter tip than D series and is more common in the US. All pin-based cfl, but it is dangerous for led lamp. Because led lamp are built with leds and driver which is transforming the 100-240v ac to dc for leds. Ballast is a must to start a high voltage600v-1500v 1ms to light up the CFL, so 600-1500V will be too high, and easily destroy the led lamp. The ballast in your fixture must be removed or bypassed for these adapters to function properly.

Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb. Works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube;g24q-2 base:18w quad tube;gx24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube. So the led driver input should be 100v-240v or 85-265v, like g24d gx24d GX24Q GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Part NumberGX24Q-E26
ModelGX24Q-E26

5. OmeiLighting

#ad

Gx24q to E26/E27 Lamp Base Converter. Need Rewire to Bypass Ballast, 2-Pack 4Pin Light Socket Adapter

#ad
OmeiLighting #ad - Physically change the socket contact, hot or smell, burnt, which will cause the led bulb flickering, twist into existing GX24Q socket and transform the fixture to fit any standard E26 E27 medium size bulb.2pcs/lot, g24q-2. G24q-3, gx24q-1, gx24q-2, suitable for g24q-1, sample pack.

So the best thing is bypass or remove once we want to change CFL to LED Lamp. Short version 4pins, GX24q-3 socket;. When we remove pin-based cfl, there will be 2 ballasts, the ballast is still working in front fixture; even we change to E26/E27 CFL, we only removed the lamp, the light will not work. Not for diy!!! need rewiring! removing or bypassing the ballast inside the light fixture is required. With base depth is 15. 5mm/06 inches. 4p conductive, copper contact.

Suitable for all voltage: 100-240v, omeilighting's new generation. Consult an electrician if you are unsure. Pbt housing, works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube;g24q-2 base:18w Quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube. But mostly gx24q cfls are with an electronic ballast inside, and damage the electrical parts inside the bulb. Do not operate the led bulb with ballast in the fiXTURE.
BrandOmeiLighting #ad
ManufacturerOmeiLighting #ad

6. Xinyixing

#ad

G24 to E27 E26 4-Pin LED Light Sockets Adapter, Converters Lamp Holder Pack of 1, Light Bulb Socket, Bulb Base Adapter

#ad
Xinyixing #ad - It fits any standard medium bulb to the G24 and enables almost all commonly found bulbs to work with the output. The ballast in your fixture must be removed or bypassed for these adapterS TO FUNCTION PROPERLY. This adapter with short shaft. Works with led / halogen / CFL light bulb lamps.

When we remove pin-based cfl, the ballast is still working in front fixture; even we change to E26/E27 CFL, there will be 2 ballasts, the light will not work. There are some led driver who can be compatible with the ballast, we only removed the lamp, no led driver can be compatible with all the ballast. Some of our customers often buy wrong size adapters for their bulb, it does not fit well. Suitable for multiple voltagesNote: it can not transfer the voltage, just the socket converter.

Please bypass or remove the ballast when you use, otherwise the bulb doesn't light on. Material: flame resistant pbt. Ideal for home use. Easy to install, plug and play. Please check your bulb size, and refer on our adapter detailed size on the left picture before you purchase. G24 base to e26/e27 light sockets adapter, this socket converter can be used to transforms G24 fixture to fit standard the E26 / E27 medium size bulb in any.
BrandXinyixing #ad
ManufacturerShangge #ad
Part NumberG24-E27/E26

7. Xinyixing

#ad

Light Bulb Socket, G24 to E27 E26 4-Pin LED Light Sockets Adapter, Converters Lamp Holder Pack of 1, Bulb Base Adapter

#ad
Xinyixing #ad - This adapter with long shaft. The ballast in your fixture must be removed or bypassed for these adapterS TO FUNCTION PROPERLY. Material: flame resistant pbt. Suitable for multiple voltagesNote: it can not transfer the voltage, just the socket converter.

G24 base to e26/e27 light sockets adapter, this socket converter can be used to transforms G24 fixture to fit standard the E26 / E27 medium size bulb in any. When we remove pin-based cfl, we only removed the lamp, there will be 2 ballasts, the ballast is still working in front fixture; even we change to E26/E27 CFL, the light will not work. Works with led / halogen / CFL light bulb lamps. It fits any standard medium bulb to the G24 and enables almost all commonly found bulbs to work with the output.

There are some led driver who can be compatible with the ballast, no led driver can be compatible with all the ballast. Ideal for home use. Please bypass or remove the ballast when you use, otherwise the bulb doesn't light on. Please check your bulb size, and refer on our adapter detailed size on the left picture before you purchase. So the best thing is bypass or remove once we want to change CFL to LED Lamp. Easy to install, plug and play.
BrandXinyixing #ad
ManufacturerShangge #ad
Part NumberG24-E27/E26

8. Mworld2

#ad

Connector 250 V 2A, 2G11 4-pin Base, Lampholder 4 Pin 2G11 Tube Socket Adapter Connector Lamp Holder

#ad
Mworld2 #ad - Not easy to be deformed. Contact-type: straight-in double edge. Package included: 1 PC x Lamp Base. Lamp contacts: 4-Pin. Package included: 1 PC x Lamp Base.
BrandMworld2 #ad
ManufacturerMworld2 #ad
Height3.15 Inches
Length12.6 Inches
Weight0.02 Pounds
Width3.94 Inches
Part Number15877224775009

9. E-Simpo

#ad

Must Bypass Ballast to Avoid Flick Smoke Burn 6pcs E-Simpo 4Pin Conductive Gx24q to E26/E27 Lamp Base Adapter Short G24q to Medium Edison Light Socket Converter Replace CFL PL GX24Q Holder

#ad
E-Simpo #ad - Consult an electrician if you are unsure. Do not operate a led bulb with a ballast in the fixture, doing so will likely damage the bulb. There are led bulbs with driver compatible with the ballast, cause high temperature which will damage LED Bulb, So the Professional doing is bypass it.

With base depth 15. 5mm/06 inches. All pin-based cfl, so 600-1500v will be too high, like gx24q g24 gx23 g23 are lamp-ballast separated, but it is dangerous for led lamp. To bypass this ballast, and connect 2 red to black, cut all the Input and output wires, the Ballast has a black and white wire on the input side, 2 Blue to White wire. Because led lamp are built with leds and driver which is transforming the 100-240V AC to DC for LEDs. The ballast in your fixture must be removed or bypassed for these adapters to function properly.

Ballast is a must to start a high voltage600V-1500V 1ms to light up the CFL, and easily destroy the led lamp. Short version 4-pins: q series has a shorter tip than d series, gx24q-1, gx24q-3 socket;works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube;g24q-2 base:18w quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube; If your socket is 2P, Suitable for G24Q-1, G24Q-2. G24q-3, gx24q-2, buy: https://www. Amazon.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
Part NumberGX24Q-E26
ModelGX24Q to E26/E27 Adapter

10. E-Simpo

#ad

Need Bypass BallastGX24Q-3 to E26/E27 CFL Bulb Socket Adapter 6pcs E-Simpo 4-Pin GX24Q G24Q to Standard Medium Bulb Holder Base Converter

#ad
E-Simpo #ad - Need rewiring!!! not for diy, and connect 2 red to black, please install it only with qualified electrician!!! bypass/ remove the ballast, two red and two blue output side.6pcs. 4pin gx24q or g24q to e26/e27 light socket adapter. Please make sure the lamp base type before you buy, DON'T Mix with other 2P 4P socket.

Material: anti-burning pbt, copper contact. Dismantle ballast before install the led light, smell, hot, reviews like burnt, otherwise the ballast will make resonance high voltage which destroy the light, flicking are all results that not bypass the ballast correctly. To bypass this ballast, cut all the input and output wires, the Ballast has a black and white wire on the input side, 2 Blue to White wire. It is 100% that pl-c downlight fixture has ballast inside.

Home or commercial use, Suitable for less than 100W. With base depth 15. 5mm/06 inches. Short version 4-pins: q series has a shorter tip than d series, gx24q-1, gx24q-2, suitable for g24q-1, g24q-2. G24q-3, gx24q-3 socket;works for 4-pin cfl with g24q-1 base:10w 13w quad tube; gx24q-1 base:10w 13w triple tube;g24q-2 base:18w Quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube;. No ballast is required.
BrandE-Simpo #ad
ManufacturerE-Simpo #ad
ModelGX24Q-E26