Top 10 4 inch Hole Saw Masonry – Hole Saws

As an Amazon Associate I earn from qualifying purchases.

1. MAGBIT

#ad

MAGBIT 625.6616 MAG625 4-1/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

#ad
MAGBIT #ad - 1-3/8-inch depth. Works in rotary and SDS hammer mode, works forward and reverse. Use standard or SDS shank arbors. Drilling a hole through concrete block takes less than 7 seconds. Cuts brick, stucco, fiber cement siding & backer board, concrete block, old plaster.
BrandMAGBIT #ad
ManufacturerMagnus Industries Inc. #ad
Height2.4 Inches
Length6.3 Inches
Weight1.05 Pounds
Width5.2 Inches
Part NumberMAG-8967
Model625.6616
WarrantyReturn defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.

2. MAGBIT

#ad

MAGBIT 625.6416 MAG625 4-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

#ad
MAGBIT #ad - Drilling a hole through concrete block takes less than 7 seconds. Cuts brick, concrete block, stucco, fiber cement siding & backer board, old plaster. Works in rotary and SDS hammer mode, works forward and reverse. 1-3/8-inch depth. Use standard or SDS shank arbors.
BrandMAGBIT #ad
ManufacturerMagnus Industries Inc. #ad
Weight0.77 Pounds
Part NumberMAG-9015
Model625.6416
WarrantyReturn defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.

3. Starrett

#ad

Starrett KD0414-N 4.1/4-Inch Diamond Grit Holesaw

#ad
Starrett #ad - Clean effective cuts and extended life. Uniform synthetic diamond grit bonded over a durable steel platform. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Recommended cutting speed is from 150 to 300-RPM.
BrandStarrett #ad
ManufacturerStarrett #ad
Height2 Inches
Length8 Inches
Weight1.06 Pounds
Width6 Inches
Part Number3136574
ModelKD0414-N

4. EDiamondTools

#ad

Dry Drill Core Bits for Brick, Masonry, 4" Diameter 5/8"-11 Threaded #30/40 Diamond Grit, Concrete Block

#ad
EDiamondTools #ad - Thread: 5/8"-11 threaded. 30/40 diamond grit for drilling soft brick, soft masonry, concrete block. High diamond concentration and quality guarantee longer coring life, solid poured concrete Not commended. Diameter: 4 inches. Drilling depth: 9. 5".
BrandEDiamondTools #ad
ManufacturerEDiamondTools #ad
Height4.13 Inches
Length11.61 Inches
Weight4.41 Pounds
Width4.13 Inches
Part NumberDBP0400A5

5. DRILAX

#ad

Drilax Diamond 4 inch Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block 3/8 inch Standard Shank Rotary Tools

#ad
DRILAX #ad - Durable 4 core drill bits for concrete, exactly 4 inches diameter. Concrete hole saw 4 inch with 2 inch depth of cut and standard 3/8 inch shank for standard cordless or electric drill. Laser welded diamond concrete hammer core bit fits your standard drill. 4 in concrete hole saw dry or wet use drilling holes in concrete block, tile, foundations, ceramic, marble, brick, basement walls, granite countertop, stones, porcelain.4 in concrete core saw hammer drill bits for concrete.
BrandDRILAX #ad
ManufacturerDRILAX #ad
Part NumberDRILAXHD010100

6. Joiner

#ad

100mm 4" Diamond Hole Saws Drill Bit Masonry Drilling Tools for Stone Glass Tile

#ad
Joiner #ad - Excellent for making clean and accurate hole on stone, granite, marble, tile. Diamond drill set with 3/8" hex shank that will fit cordless screwdrivers, drills or drill chuck. Product name: diamond tip masonry bit, Stone cutting bits, Large hole saw, Granite hole bit. Outside diameter:100mm; hex shank diameter:10 mm 3/8"; Total length:65mm; Drill depth:29-30mm. Start drill at 45 degree to surface and align to 90 degree as hole forms.
BrandJoiner #ad
ManufacturerJoiner #ad
Part NumberDLSKKQ-100MM

7. Hanperal

#ad

Hanperal 90mm SDS Plus Shank Hole Saw Cutter, Wall Hole Saw Drill Bit for Brick Concrete Cement Stone

#ad
Hanperal #ad - Made of carbide tipped metal material, very durable. Designed with sdS connecting rod,stable and easy to use. High-frequency welding technology, smooth inside and outside welding mouth, precision engage, welding openings is very strong, appearance. The size of the cutter head as the picture showns. Suitable for drilling walls, hollow brick to operate air conditioning holes, pipe holes and so on.
BrandHanperal #ad
ManufacturerHanperal #ad

8. ARTU-USA

#ad

Hole Saw Tc Grit 4in W/Arb&Bit

#ad
ARTU-USA #ad - 3/8" shank. For use on concrete block, fiberglass, cultured Marble, Drywall, Plastic, PVC, Cement Board, Ceramic Tile, Brick, wood, Plexiglass. For the builder, do-it-yourselfer, homeowner, tile setter, construction worker and other professionals.2-1/4" cutting depth. Tungsten carbide Grit Hole Saw for Abrasive Construction Materials. Designed to work with any variable speed hand drill. Cuts clean holes smoothly in materials without snagging.
BrandARTU-USA #ad
ManufacturerArtu #ad
Height8.7 Inches
Length4.1 Inches
Weight1.5 Pounds
Width6.3 Inches
Part Number02870
Model2870

9. Binota

#ad

100 mm, BINOTA Concrete Hole Saw SDS Plus Shank for Cement Brick Wall

#ad
Binota #ad - Dimensions: the length of the connecting rod shank is 220 mm, which can meet the drilling requirements of most wall thicknesses.

Components: 3pcs, including one hole opener, one connecting rod, one screw and one drill. Design: the shank of the connecting rod adopts SDS PLUS design, which is convenient to be used with the round shank four-pit electric impact drill. Material: the cutter head is made of alloy YG8, which can be used for drilling cement wall, concrete wall, brick and so on. The use of occasions : can be used for opening brick walls when installing air conditioners, water heaters, sewers, fume pipes, water pipes, etc.
BrandBinota #ad
ManufacturerBINOTA #ad
Part NumberBKCP100

10. BOSCH

#ad

Bosch HDG418 4-1/8 In. Diamond Hole Saw

#ad
BOSCH #ad - Remove material plugs quickly, easily. Segmented teeth reduce debris and heat. Vacuum-brazed diamond grit cuts faster and lasts longer. One-inch maximum cutting depth.
BrandBOSCH #ad
ManufacturerBosch #ad
Height0 Inches
Length0 Inches
Weight1.08 Pounds
Width0 Inches
Part NumberHDG418
ModelHDG418
WarrantyNo