RudedogUSA- Set Of Three 7/8″ Sleever Bar Lockwasher & Grommet

#ad
RudedogUSA #ad -
#ad



OTC 7168 30" Jimmy Bar

#ad
OTC 7168 #ad - 7/8 inch diameter. The otc 7168 jimmy bar is forged from chrome alloy steel, and then heat treated to resist bending and breaking. 30 inches in length. Forged from chrome alloy steel. 7/8” diameter and 30” long. Heat-treated to resist bending.

#ad



30" Aligning Pry bar J2125 - Proto

#ad
Stanley Proto J2125 #ad - 30" Aligning Pry bar J2125 - Proto #ad - Forged from chrome alloy steel. 7/8-inch top width 7/8-inch shank width 30-inch overall length. Heat-treated to resist bending. Stanley j2125 proto 30-inch aligning Pry Bar Application: for prying, positioning and aligning applications. 3/4-inch shank width. Application: for prying, positioning and aligning applications.

30 inches in length. 7/8 inch diameter. 7/8-inch tip width. 30-inch overall length.

#ad



Rudedog 7/8 Lockcollar & Grommet 1

#ad
RudedogUSA #ad - 3/4-inch shank width. 30-inch overall length. Forged from chrome alloy steel. Heat-treated to resist bending. 7/8-inch tip width. 7/8 inch diameter. Application: for prying, positioning and aligning applications. Sleever Bar Lockwasher & grommet. Fits a 7/8 round sleever Bar Does not fit a Hexagonal Sleever Bar. 30 inches in length.

#ad



30-Inch Hex Bar Klein Tools 3242

#ad
Klein 3242 #ad - 3/4-inch shank width. Forged fit-up bar is pointed on one end. Heat-treated to resist bending. Forged from chrome alloy steel. Klein tools 3242 30-inch hex, 3/4-inch diameter connecting bar 7/8 inch diameter. Length: 30 inches. Application: for prying, positioning and aligning applications. Sleever Bar Lockwasher & grommet.

30-Inch Hex Bar Klein Tools 3242 #ad - Fits a 7/8 round sleever Bar Does not fit a Hexagonal Sleever Bar. 30 inches in length. Diameter: 3/4-inch. 7/8-inch tip width. Provides extra leverage when positioning steel members and aligning bolt holes. Chisel-end is at a 15-degree angle to give greater leverage. 30-inch overall length.

#ad



Klein Tools 5416TFR Bolt Bag, Flame Resistant Canvas Bag for Bolt Storage with Double Bottom and Tunnel Loop, 9-Inch

#ad
Klein - Geneva Supply 5416TFR #ad - Heat-treated to resist bending. Meets the performance requirement of NFPA -701. Length: 30 inches. 3/4-inch shank width. 4 canvas. 7/8-inch tip width. Flame retardant, hard-leather bottom. Forged fit-up bar is pointed on one end. Chisel-end is at a 15-degree angle to give greater leverage. Diameter: 3/4-inch. Forged from chrome alloy steel.

Klein Tools 5416TFR Bolt Bag, Flame Resistant Canvas Bag for Bolt Storage with Double Bottom and Tunnel Loop, 9-Inch #ad - 30-inch overall length. Provides extra leverage when positioning steel members and aligning bolt holes. For added protection in the field, Klein's flame-retardant canvas bolt bag is made of flame-resistant No. 30 inches in length. Fits a 7/8 round sleever Bar Does not fit a Hexagonal Sleever Bar. Sleever Bar Lockwasher & grommet.

Tunnel loop for sliding over belt. 7/8 inch diameter. Assembled in usa of U. S. Features convenient tunnel loop for sliding over your belt. And imported components.

#ad



Klein Tools 3248 Connecting Bar, 7/8-Inch Round by 30-Inch Long

#ad
Klein 3248 #ad - Klein tools 3248 30-inch round connecting bar, 7/8-inch diameter 7/8 inch diameter. Provides extra leverage when positioning steel members and aligning bolt holes. And imported components. Meets the performance requirement of NFPA -701. Forged from chrome alloy steel. Provides extra leverage when positioning steel members and aligning bolt holes.

Forged fit-up bar is pointed on one end. Assembled in usa of U. S. Application: for prying, positioning and aligning applications. Other hex bar sizes sold separately. 30 inches in length. Chisel-end is at a 15-degree angle to give greater leverage. 3/4-inch shank width. Flame retardant, hard-leather bottom. Heat-treated to resist bending.

Klein Tools 3248 Connecting Bar, 7/8-Inch Round by 30-Inch Long #ad - Diameter: 3/4-inch. 7/8-inch tip width. Sleever Bar Lockwasher & grommet. Manufactured from hardened steel for increased durability.

#ad



Klein Tools 5416T Bolt Bag, Canvas Tool Pouch for Bolt/Bull Pin Storage with Tunnel Loop Belt Connection

#ad
Klein - Geneva Supply 5416T #ad - Provides extra leverage when positioning steel members and aligning bolt holes. Since 1857. Sleever Bar Lockwasher & grommet. 3/4-inch shank width. Fits a 7/8 round sleever Bar Does not fit a Hexagonal Sleever Bar. And imported components. Forged from chrome alloy steel. 30-inch overall length. 4 canvas with double bottom.

Manufactured from hardened steel for increased durability. Klein tools' bull-pin and bolt bag is built from sturdy canvas with a double layer of canvas on the bottom where it's needed most. Having durable storage solutions on the jobsite is a must. Bolt bag with bull-pin loop on each side. No. Length: 30 inches.

Klein Tools 5416T Bolt Bag, Canvas Tool Pouch for Bolt/Bull Pin Storage with Tunnel Loop Belt Connection #ad - Forged fit-up bar is pointed on one end. Chisel-end is at a 15-degree angle to give even greater leverage. It is also stitched and riveted for added strength. For more than 160 years, klein tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right.

Chisel-end is at a 15-degree angle to give greater leverage. Forged fit-up bar is pointed on one end.

#ad



MSA 475395 Skullgard Protective Hard Hat Front Brim, Fas-Trac III Suspension, Standard Size, Natural Tan

#ad
MSA Safety 475395 #ad - Tunnel loop for sliding over belt. Stitched and riveted for added strength. 3/4-inch shank width. Forged from chrome alloy steel. Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding, 350F. Assembled in usa of U. S. Tunnel loop belt connection. And imported components.

Designed to offer outstanding protection in hot and dangerous industries, The Skullgard protective cap sets the Standard for environments such as steel mills. Provides extra leverage when positioning steel members and aligning bolt holes. Meets the performance requirement of NFPA -701. Other hex bar sizes sold separately.

MSA 475395 Skullgard Protective Hard Hat Front Brim, Fas-Trac III Suspension, Standard Size, Natural Tan #ad - 4 canvas with double bottom for added durability. Forged fit-up bar is pointed on one end. 30 inches in length. Standard size, fits from 6 1⁄2" to 8". Length: 30 inches. Ansi/isea z89. 1-2014 class g compliant, provides dielectric protection up to 2, 200 volts.

#ad



RudedogUSA Sleever Bar Holder Original Version

#ad
RudedogUSA #ad - Assembled in usa of U. S. Tunnel loop belt connection. Leather. Ansi/isea z89. 1-2014 class g compliant, provides dielectric protection up to 2, 200 volts. Equipped with fast-trac III ratchet-style suspension for easy fast size adjustment and all day comfort. Heat-treated to resist bending. Provides extra leverage when positioning steel members and aligning bolt holes.

RudedogUSA Sleever Bar Holder Original Version #ad - Rudedog premium black Leather Sleever Bar Holder 7/8 inch diameter. 30-inch overall length. Fits a 7/8 round sleever Bar Does not fit a Hexagonal Sleever Bar. Standard size, fits from 6 1⁄2" to 8". Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding, 350F.

Ansi/csa type i compliant, Protects from vertical impacts and penetrations. 30 inches in length. Forged from chrome alloy steel. Manufactured from hardened steel for increased durability. Provides extra leverage when positioning steel members and aligning bolt holes. 7/8-inch tip width.

#ad



Spud Wrench Holder Tunnel Connection Klein Tools 5459T

#ad
Klein 5459T #ad - Assembled in usa of U. S. Klein tools 5459t leather erection wrench holder with tunnel loop 7/8 inch diameter. No. Slots for two erection wrenches. Standard size, fits from 6 1⁄2" to 8". No. Leather. Bolt bag with bull-pin loop on each side. Tunnel loop belt connection. Flame retardant, hard-leather bottom. 3/4-inch shank width.

Spud Wrench Holder Tunnel Connection Klein Tools 5459T #ad - Application: for prying, positioning and aligning applications. Tunnel loop for sliding over belt. 30-inch overall length. Skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding, 350F. Ansi/csa type i compliant, Protects from vertical impacts and penetrations.

Stitched and riveted for added strength. Provides extra leverage when positioning steel members and aligning bolt holes. Chisel-end is at a 15-degree angle to give greater leverage. Forged fit-up bar is pointed on one end. Holds erection wrenches and adjustable head construction wrench Cat. 3239.

#ad